1925-2025 - Celebrating 100 Years

  • Home
  • Instructions
  • Company Info
  • View Cart
  • My Account
  • Log Out

1925-2025 - Celebrating 100 Years

Menu
  • Home
  • Instructions
  • Company Info
  • View Cart
  • My Account
  • Log Out
Marketplace Menu
0
0
All Product Categories

Comstock Series Traps

  • Powerful Trap Door Springs - Comstock Series Traps feature our most powerful trap doors and instantly snap into place when the trap is triggered.
  • Set in any position - After the trap is set it can be placed in any position including vertical making it a great trap for chimney sets and awkward positions.
  • No Trip Pan- Comstock Series Traps are triggered by a swinging wire trigger mechanism or swinging panel which allows you to capture trap wise animals that are likely to avoid a standard trip pan trap.
  • Powder Coated. All Comstock Series Traps come with a powder coated finish. (Excluding swing panel traps.)
  • Made in the USA. Manufactured by Tomahawk Live Trap in the USA at our facility in Hazelhurst, Wisconsin.
  • Quality Assured. Each trap is quality inspected and tested before it is shipped to you, our valued customer.
Filters
  • Price
  • ‎$7
  • ‎$898

$  –  $

In This Category: In This Category:

In This Category:
Sort by Position: Low to High
50 Per Page
3-Way Nose Cone Splitter For 9x11 Traps
C911SP
Model C911SP is a time saver. The 3 way nose cone splitter may be used at free standing den sites or dens under or against structures to direct animals into double door Comstock Cage Traps. It can be used with a single trap over a den or entry point or up to three flush mount traps at a time can be used if targeting multiple animals in a den. This accessory measures 12 x 11 x 11 and is constructed of 1x1 - 14ga wire mesh.
Weight: 4 lbs
Size: 12L x 11W x 11H
Wire: 1 x 1 - 14 gauge with 1/4 frame
$8500
+ −
Add to Cart
3-Way Nose Cone Splitter For 12x12 Traps
C1212SP
Model C1212SP is designed to be used with Comstock Series 12x12 traps. The 3 way nose cone splitter may be used at free standing den sites or dens under or against structures to direct animals into double door Comstock Cage Traps. This accessory measures 13 x 13 x 13 and is constructed of 1x1 - 14ga wire mesh.
Weight: 5 lbs
Size: 13L x 13W x 13H
Wire: 1 x 1 - 14 gauge with 1/4 frame powder coated
$9950
+ −
Add to Cart
C911NC-18 - Sheet Metal Cover Cone for 18" Comstock Cage Traps with Standard Trap Doors
C911NC-18
This handy multi purpose accessory was made to fit over the 9x11x18 Comstock Cage Traps and bring capture time to a minimum for den animals like woodchucks, skunks, armadillos. For transport, the nose cone fits over the cage, taking up no extra room. With no less than 3 uses, the nose cone can be used to direct animals into Comstock Double Door Cage Traps at den sites, either at free standing dens sites or dens located up against structures. When placed sideways against structure, either one or two traps may be used. Secondly, when using bait with either single or double door Comstock Cage Traps, the solid nature of the nose cone...
Weight: 5 lbs
Size: 18L x 9½W x 11H
Wire: Sheet Metal with 1x1-14g flap
$6500
+ −
Add to Cart
C911NC-24 Sheet Metal Cover Cone for 24" Comstock Traps with Standard Trap Doors
C911NC-24
This handy multi purpose accessory was made to fit over the 9x11x24 Comstock Cage Traps and bring capture time to a minimum for den animals like woodchucks, skunks, armadillos. For transport, the nose cone fits over the cage, taking up no extra room. With no less than 3 uses, the nose cone can be used to direct animals into Comstock Double Door Cage Traps at den sites, either at free standing dens sites or dens located up against structures. When placed sideways against structure, either one or two traps may be used. Secondly, when using bait with either single or double door Comstock Cage Traps, the solid nature of the nose cone prevents...
Weight: 5 lbs
Size: 24L x 9½W x 11H
Wire: Sheet Metal with 1x1-14g flap
$6500
+ −
Add to Cart
C911NC-24F - Sheet Metal Cover Cone for 24" Comstock Traps with Flush Mount Doors
C911NC-24F
This handy multi purpose accessory was made to fit over the 9x11x24 Comstock Cage Traps with flush mount doors and bring capture time to a minimum for den animals like woodchucks, skunks, armadillos. For transport, the nose cone fits over the cage, taking up no extra room. With no less than 3 uses, the nose cone can be used to direct animals into Comstock Double Door Cage Traps at den sites, either at free standing dens sites or dens located up against structures. When placed sideways against structure, either one or two traps may be used. Secondly, when using bait with either single or double door Comstock Cage Traps, the solid nature of...
Weight: 5 lbs
Size: 24L x 9-1/2W x 11H
Wire: Sheet Metal with 1x1-14g flap
$6500
+ −
Add to Cart
C911NC-30 - Sheet Metal Cover Cone for 30" Comstock Traps WITH STANDARD TRAP DOORS
C911NC-30
This handy multi purpose accessory was made to fit over 30Lx9Wx11H Comstock traps to bring capture time to a minimum for denning animals like woodchucks, skunks, armadillos, etc. For transport, the nose cone fits snuggly over the cage, taking up no room. With no less than 3 uses, the nose cone can be used to direct animals into Comstock Double Door Cage Traps at den sites, either at free standing dens sites or dens located up against structure, when animals enter or exit dens. When placed sideways against structure, either one or two traps may be used. Secondly, when using bait with either single or double door Comstock Cage Traps,...
Weight: 5 lbs
Size: 24L x 9½W x 11H
Wire: Sheet Metal with 1x1-14g flap
$7500
+ −
Add to Cart
C911NC-30F - Sheet Metal Cover Cone for 30" Comstock Traps with Flush Mount Door
C911NC-30F
This handy multi purpose accessory was made to fit over the 9x11x30 Comstock Cage Traps with flush mount door and bring capture time to a minimum for den animals like woodchucks, skunks, armadillos. For transport, the nose cone fits over the cage, taking up no extra room. With no less than 3 uses, the nose cone can be used to direct animals into Comstock Double Door Cage Traps at den sites, either at free standing dens sites or dens located up against structures. When placed sideways against structure, either one or two traps may be used. Secondly, when using bait with either single or double door Comstock Cage Traps, the solid nature of...
Weight: 5 lbs
Size: 30L x 9-1/2W x 11H
Wire: Sheet Metal with 1x1-14g flap
$7500
+ −
Add to Cart
C911NC-36 - Sheet Metal Cover Cone for 36" Comstock Traps WITH STANDARD TRAP DOORS
C911NC-36
This handy multi purpose accessory was made to fit over the 36Lx9Wx11H Comstock traps to bring capture time to a minimum for denning animals like woodchucks, skunks, armadillos, etc. For transport, the nose cone fits snuggly over the cage, taking up no room. With no less than 3 uses, the nose cone can be used to direct animals into Comstock Double Door Cage Traps at den sites, either at free standing dens sites or dens located up against structure, when animals enter or exit dens. When placed sideways against structure, either one or two traps may be used. Secondly, when using bait with either single or double door Comstock Cage...
Weight: 5 lbs
Size: 36L x 9½W x 11H
Wire: Sheet Metal with 1x1-14g flap
$8500
+ −
Add to Cart
C911NC-36F - Sheet Metal Cover Cone for 36" Comstock Traps with Flush Mount Door
C911NC-36F
This handy multi purpose accessory was made to fit over the 9x11x36 Comstock Cage Traps with flush mount door and bring capture time to a minimum for den animals like woodchucks, skunks, armadillos. For transport, the nose cone fits over the cage, taking up no extra room. With no less than 3 uses, the nose cone can be used to direct animals into Comstock Double Door Cage Traps at den sites, either at free standing dens sites or dens located up against structures. When placed sideways against structure, either one or two traps may be used. Secondly, when using bait with either single or double door Comstock Cage Traps, the solid nature of...
Weight: 5 lbs
Size: 36L X 9-1/2W X 11H
Wire: Sheet Metal with 1x1-14g flap
$8500
+ −
Add to Cart
Nose Cone For Model C3524 - 7L x 3½W x 5½H
CN357
Model CN357 is a nose cone designed to be used with the model C3524 swing panel trap for positive set mounting over virtually any rodent hole to capture animals exiting or entering. The nose cone can be placed over holes in the ground to capture chipmunks and ground squirrels or secured to buildings over entry holes in any position. This nose cone can be rotated to accommodate holes in walls, attached either left or right as well as attached to overhead openings from above in soffits or ceilings. With dual flaps that can be used separately or together, this unique nose cone was purposely engineered to fit over hard to reach corner...
Weight: 1 lbs
Size: 7L x 5.5W x 5.5H
Wire: ½ x 1 – 14 ga
$3500
Select options
Nose Cone For Model C5524 - 7L x 5 ½W x 5 ½H
CN557
Model CN557 is a nose cone designed to be used with the model C5524 swing panel trap for positive set mounting over virtually any rodent hole to capture animals exiting or entering. The nose cone can be placed over holes in the ground to capture chipmunks and ground squirrels or secured to buildings over entry holes in any position. This nose cone can be rotated to accommodate holes in walls, attached either left or right as well as attached to overhead openings from above in soffits or ceilings. With dual flaps that can be used separately or together, this unique nose cone was purposely engineered to fit over hard to reach corner...
Weight: 1 lbs
Size: 7L x 5.5W x 5.5H
Wire: ½ x 1 – 14 ga
$4000
Select options
Nose Cone For Model C6626 - 7L x 6.5W x 6.5H
CN668
Model CN668 is a nose cone designed to be used with the model C6626 swing panel trap for positive setting over virtually any rodent hole to capture animals exiting or entering. The nose cone can be placed over holes in the ground to capture chipmunks and ground squirrels or secured to buildings over entry holes in any position. This nose cone can be rotated to accommodate holes in walls, attached either left or right as well as attached to overhead openings from above in soffits or ceilings. With dual flaps that can be used separately or together, this unique nose cone was purposely engineered to fit over hard to reach corner holes...
Weight: 2 lbs
Size: 7L x 6.5W x 6.5H
Wire: ½ x 1 – 14 ga
$4500
Select options
Free shipping
9x11 Fixed Position Trigger Wires - 2 Pack
CP911FT-2
Original fixed position style wire triggers for all Comstock Series 9x11 traps. This part is made from 14 gauge spring wire. These wire triggers are installed by feeding them through holes on the swing bar.
$1000
+ −
Add to Cart
Free shipping
9x11 Fixed Position Trigger Wires - 6 Pack
CP911FT-6
Original fixed position style wire triggers for all Comstock Series 9x11 traps. This part is made from 14 gauge spring wire. These wire triggers are installed by feeding them through holes on the swing bar. Pack of six.
$1500
+ −
Add to Cart
Free shipping
9x11 Fixed Position Trigger Wires - 12 Pack
CP911FT-12
Original fixed position style wire triggers for all Comstock Series 9x11 traps. This part is made from 14 gauge spring wire. These wire triggers are installed by feeding them through holes on the swing bar. Pack of twelve.
$2500
+ −
Add to Cart
Free shipping
12x12 Fixed Position Trigger Wires - 2 pack
CP12FT-2
Original fixed position style wire triggers for all Comstock Series 12x12 traps. This part is made from 14 gauge spring wire. These wire triggers are installed by feeding them through holes on the swing bar. Pack of two.
$1000
+ −
Add to Cart
Free shipping
12x12 Fixed Position Trigger Wires - 6 pack
CP12FT-6
Original fixed position style wire triggers for all Comstock Series 12x12 traps. This part is made from 14 gauge spring wire. These wire triggers are installed by feeding them through holes on the swing bar. Pack of six.
$1500
+ −
Add to Cart
Free shipping
12x12 Fixed Position Trigger Wires - 12 Pack
CP12FT-12
Original fixed position style wire triggers for all Comstock Series 12x12 traps. This part is made from 14 gauge spring wire. These wire triggers are installed by feeding them through holes on the swing bar. Pack of twelve.
$2500
+ −
Add to Cart
Free shipping
Beaver Trap Fixed Position Trigger Wires - 3 Pack
CP39FT-3
Original fixed position style wire triggers for the Comstock Series 12x18 Beaver Trap. This part is made from 14 gauge spring wire. These wire triggers are installed by feeding them through holes on the swing bar. Pack of three.
$1000
+ −
Add to Cart
Free shipping
Beaver Trap Fixed Position Trigger Wires - 6 Pack
CP39FT-6
Original fixed position style wire triggers for the Comstock Series 12x18 Beaver Trap. This part is made from 14 gauge spring wire. These wire triggers are installed by feeding them through holes on the swing bar. Pack of six
$1500
+ −
Add to Cart
Free shipping
Beaver Trap Fixed Position Trigger Wires - 12 Pack
CP39FT-12
Original fixed position style triggers for the Comstock Series 39" x 18" x 12" Beaver trap. Package of twelve. This style of trigger wire is fed through holes on the swing bar when attached.
$2500
+ −
Add to Cart
Free shipping
9x11 Post Mount Trigger Wires - 2 Pack
CP911P-2
New Post Mount break away style replacement trigger wires for all Comstock Series 9" x 11" traps. Package of two. This part is made from 14 gauge spring wire. The new style of trigger wires simply slide on to the posts of the swing bar. This new style is safer for animals and also dramatically reduces the amount of trigger wires damaged by trapped animals.
$1000
+ −
Add to Cart
Free shipping
9x11 Post Mount Trigger Wires - 6 Pack
CP911P-6
New Post Mount replacement trigger wires for Comstock Series 9" x 11" traps that have post mounts on the swing bar. Package of six. This part is made from 14 gauge spring wire. The new style of trigger wires simply slide on to the swing bar posts. This new style is safer for animals and also dramatically reduces the amount of trigger wires damaged by trapped animals.
$1500
+ −
Add to Cart
Free shipping
9x11 Post Mount Trigger Wires - 12 Pack
CP911P-12
New Post Mount replacement trigger wires for Comstock Series 9" x 11" traps with post mounts on the swing bar. Package of twelve. This part is made from 14 gauge spring wire. The new style of trigger wires simply hook on to the posts of the swing bar. This new style is safer for animals and also dramatically reduces the amount of trigger wires damaged by trapped animals.
$2500
+ −
Add to Cart
Free shipping
9x11 Break Away Trigger Wires - 2 Pack
CP911S-2
New break away style replacement trigger wires for all Comstock Series 9" x 11" traps. Package of two. This part is made from 14 gauge spring wire. The new style of trigger wires simply hook on to the swing bar rather than being fed through it. This new style is safer for animals and also dramatically reduces the amount of trigger wires damaged by trapped animals.
$1000
+ −
Add to Cart
Free shipping
9x11 Break AwayTrigger Wires - 6 Pack
CP911S-6
New break away style replacement trigger wires for all Comstock Series 9" x 11" traps. Package of six. This part is made from 14 gauge spring wire. The new style of trigger wires simply hook on to the swing bar rather than being fed through it. This new style is safer for animals and also dramatically reduces the amount of trigger wires damaged by trapped animals.
$1500
+ −
Add to Cart
Free shipping
9x11 Break AwayTrigger Wires - 12 Pack
CP911S-12
New break away style replacement trigger wires for all Comstock Series 9" x 11" traps. Package of twelve. This part is made from 14 gauge spring wire. The new style of trigger wires simply hook on to the swing bar rather than being fed through it. This new style is safer for animals and also dramatically reduces the amount of trigger wires damaged by trapped animals.
$2500
+ −
Add to Cart
Free shipping
12x12 Break Away Trigger Wires - 2 pack
CP12S-2
New break away style replacement trigger wires for all Comstock Series 12" x 12" traps. Package of two. This part is made from 14 gauge spring wire. The new style of trigger wires simply hook on to the swing bar rather than being fed through it. This new style is safer for animals and also dramatically reduces the amount of trigger wires damaged by trapped animals.
$1000
+ −
Add to Cart
Free shipping
12x12 Break Away Trigger Wires - 6 pack
CP12S-6
New break away style replacement trigger wires for all Comstock Series 12" x 12" traps. Package of six. This part is made from 14 gauge spring wire. The new style of trigger wires simply hook on to the swing bar rather than being fed through it. This new style is safer for animals and also dramatically reduces the amount of trigger wires damaged by trapped animals.
$1500
+ −
Add to Cart
Free shipping
12x12 Break Away Trigger Wires - 12 Pack
CP12S-12
Comstock wire triggers have been redesigned for much easier installation! The new style of trigger wires simply hook on to the swing bar rather than being fed through it. This new style is safer for animals and also dramatically reduces the amount of trigger wires damaged by trapped animals. Replacement trigger wire for all Comstock Series 12" x 12" traps. Package of twelve. This part is made from 14 gauge spring wire.
$2500
+ −
Add to Cart
Free shipping
Beaver Trap Break Away Trigger Wires - 3 Pack
CP39S-3
New break away style replacement trigger wires for the Comstock Series 39" x 18" x 12" Beaver trap. The new style of trigger wires simply hook to the swing bar. They are much easier to install, safer for animals and instead of being damaged simply break away from the swing bar if an animal tampers with them after being trapped. Package of three. This part is made from 14 gauge spring wire.
$1000
+ −
Add to Cart
Free shipping
Beaver Trap Break Away Trigger Wires - 6 Pack
CP39S-6
New style break away trigger wires for the Comstock Series 39" x 18" x 12" Beaver trap. The new style of trigger wires simply hook on to the swing bar rather than being fed through it. This new style is safer for animals and also dramatically reduces the amount of trigger wires damaged by trapped animals. Package of six. This part is made from 14 gauge spring wire.
$1500
+ −
Add to Cart
Free shipping
Beaver Trap Break Away Trigger Wires - 12 Pack
CP39S-12
New break away style replacement trigger wires for the Comstock Series 39" x 18" x 12" Beaver trap. Package of twelve. The new style of trigger wires simply hook on to the swing bar rather than being fed through it. This new style is safer for animals and also dramatically reduces the amount of trigger wires damaged by trapped animals. This part is made from 14 gauge spring wire.
$2500
+ −
Add to Cart
Free shipping
Escape Door Kit
CED
Model CED is the Comstock Escape Door Conversion Kit. This kit allows you to convert your Comstock Beaver or 12x12 trap to include an escape door. The escape door allows non-target animals such as otter to escape from the trap without injury. The kit includes a mesh panel door, spring lock, and j-clips. You will be required to cut a 4½ x 4½" opening in the bottom of your trap and install the mesh panel door. The door is 7½ x 6", the spring lock allows you to lock the mesh panel door open or closed, and the j-clips allow you to attach the mesh panel door to your trap. Cut your escape door opening on the bottom of the trap near a corner...
$1800
+ −
Add to Cart
Previous
1 2
Next