Search By Animal

SCE135 - Short, Red Squirrel / Flying Squirrel Cone Excluder

CODE:SCE135

Model SCE135 is the new Standard Duty Short Grey Squirrel Cone Excluder developed by BatCone and manufactured by Tomahawk Live Trap. This excluder has no moving parts to malfunction and will perform flawlessly for years with no maintenance required. Attach this excluder directly over the entry/exit point and squirrels will remove themselves. SCE135 can also be used with excluder trap models SPT30 or SPT35 in order to trap rather than exclude squirrels from unwanted places. This excluder is built from ½ x 1 – 16 gauge mesh wire.

Weight: .15 lbs

Size: 7L x 2W

Wire: 1/2 x 1 - 16ga

$18⁰⁰

Select options

SCE140 - Long, Red Squirrel / Flying Squirrel Cone Excluder

CODE:SCE140

Model SCE140 is the new Standard Duty Long Red / Flying Squirrel Cone Excluder developed by BatCone and manufactured by Tomahawk Live Trap. This excluder has no moving parts to malfunction and will perform flawlessly for years with no maintenance required. Attach this excluder directly over the entry/exit point and squirrels will remove themselves. SCE140 can also be used with excluder trap models SPT30 or SPT35 in order to trap rather than exclude squirrels from unwanted places. This excluder measures 12L x 2W" and is built from ½ x 1 – 16 gauge mesh wire. It is designed to fit over 2" diameter or smaller entry points.

Weight: .25 lbs

Size: 12L x 2W

Wire: 1/2 x 1 - 16ga

$21⁷⁵

Select options

409 - Floating Turtle Trap

CODE:409

Model 409 is a floating turtle trap designed to catch many turtles at a time. When turtles climb up on the ramps to sun themselves the gravity trap panels tip into the trap compartment and they fall into the trap. Made with aluminum ramps, 1" x 1" – 14 gauge coated mesh frame, and strategic ¼" steel reinforcing rods make this the strongest and most durable floating turtle trap available. The wire mesh is coated with the same material used on lobster pots in salt water. Along with turtles naturally entering the trap from sunning on the platforms you may also entice turtles to enter the trap by using chopped raw fish for bait enclosed in a...

Weight: 21 lbs

Size: 24L x 20W x 18H

Wire: 1x1 - 14 Gauge Coated

$289⁷⁵

Quantity:

+ −

Add to Cart

ADC10 - Raccoon/Woodchuck Tube Trap

CODE:ADC10

This heavy duty trap is constructed from ¼" thick PVC pipe with a 10" diameter opening and 30" length. The back plate is removable for easy baiting and cleaning. This trap is completely enclosed eliminating the change of being sprayed, bitten, or scratched. The enclosed trap also keeps trapped animals out of site and protects them from the elements. The guillotine style heavy steel bar door allows for positive sets against holes or structures.

Weight: 29 lbs

Size: 30L with 10" Diameter

Wire: Heavy Duty Plastic Tube with Sheet Metal Doors

$160⁹⁶

Select options

330 - Hydra Hook Set with Six Interchangeable Heads

CODE:330

Model 330 is a snake hook with 6 different attachment heads. Heads include a flat hook, a standard hook, a pinning head,1" double hook, 2" double hook and 3" double hook. The heads have a locking pin that holds them in place to ensure that you don't lose your head while holding a snake. Heads lock into place by tension pin and can be removed and changed in seconds with no tools required.

$169⁹⁵

Quantity:

+ −

Add to Cart

330C - Collapsible Hydra Hook Set with Six Interchangeable Heads

CODE:330C

Model 330C is a collapsible snake hook with 6 different attachment heads. Heads include a flat hook, a standard hook, a pinning head,1" double hook, 2" double hook and 3" double hook. The heads have a locking pin that holds them in place to ensure that you don't lose your head while holding a snake. Heads lock into place by tension pin and can be removed and changed in seconds with no tools required. The collapsible version can be broken down to use as a 20" pole or used together as a 40" pole.

$179⁹⁵

Quantity:

+ −

Add to Cart

Model 463 - Large Snake Trap - 60 x 8 x 8 with easy release rear access door.

CODE:463

Model 463 is a snake/reptile trap with a 2 pan system designed to catch large snakes or reptiles only. Snakes and reptiles have long bodies that are either dragged along the ground or very low to the ground. This enables them to press both pans at the same time and trigger the trap. Other animals such as mammals will walk over one pan at a time and not trigger the trap. This trap also features a removable rear door for easy animal release.

$159⁷⁵

Select options

330HK - Hydra Hook Half Set

CODE:330HK

Model 330HK is a 40" snake hook with your choice of three interchangeable attachment heads. Head choices include three of the following: a flat hook, a standard hook, a pinning head, a 1" double hook, a 2" double hook and a 3" double hook. Heads lock into place by tension pin and can be removed and changed in seconds with no tools required.

$99⁹⁵

Select options

330CHK - Collapsible Hydra Hook Half Set

CODE:330CHK

Model 330HK is a collapsible snake hook that can be used as a 20" or 40" snake hook with your choice of three interchangeable attachment heads. Head choices include three of the following: a flat hook, a standard hook, a pinning head, a 1" double hook, a 2" double hook and a 3" double hook. Heads lock into place by tension pin and can be removed and changed in seconds with no tools required. Collapsible pole can be broken down as two separate 20" hooks or locked together as one 40" hook.

$113⁵⁰

Select options

Ton Jones Stump Ripper

CODE:SR

Ton Jones Series Stump Ripper is made from .090 thick tempered aluminum tube which gives maximum strength. The neoprene grip provides comfort and a non-slip grip even in wet conditions. The hook end of the ripper is made of 3/8" Stainless Steel and will hold up against large rocks, logs, and anything else you want to throw at it. The hook bend allows the ripper to be used with either hand. Choose from lengths of 20", 30", 40", 50" and 60".

Weight: 1 lb

Size: 20" Long

Wire: Aluminum Tube & Stainless Steel Hook

$56⁷⁵

Select options

Ton Jones Snake Hook

CODE:TJSH

Ton Jones Series Standard Snake Hook. The shaft is constructed from a aluminum tube and features a non-slip neoprene grip. The hook end is made from 9/32" stainless steel for extra durability, has a 3½" opening, and is covered with latex tubing for added texture to help prevent snakes from slipping off. This tool is very durable but also extremely light for all day use under any conditions. This hook comes in multiple different sizes: 24", 28", 34", 38", 44", 48". This hook is also available in our heavy duty handle for extra strength while handling heavier animals.

Weight: 1 lb

Size: 24"

$39⁷⁵

Select options

Ton Jones Pinning Head with Pole

CODE:TJPH

Ton Jones Series pinning tool. The pinning head is made of surgical tubing that will hold snakes without causing injury. You can choose two different lengths of 30" and 40" and two different widths of the pinning head 2" or 3".

Weight: 1.5 lb

Size: 30"

Wire: Aluminum Tube & Steel Hook with Latex Pin Tube

$51²⁵

Select options

Free shipping

ArmOR Hand Animal Handling Gloves

CODE:ARMH

ArmOR Hand gloves are made for a tight fit. Please check the sizing chart below for correct size fitting. The ArmOR Hand Animal Handling Gloves are made of all synthetic materials and offer hand and arm coverage up to the elbow. These gloves fit tight and offer a lot of dexterity for fine motor skills. Reinforced high-injury areas provide additional protection. Outer layer made of durable stretch cordura. Hand lined with double knit Kevlar. Water resistant and machine washable. All animal handling gloves are bite resistant. No glove should ever be considered bite proof. Always use caution when handling animals even when gloves are worn....

$195⁰⁰

Select options

605.2 - Sheet Metal Covered Trap with Rear Sliding Door

CODE:605.2

Model 605.2 is our sheet metal covered skunk trap featuring an easy release rear door. The sheet metal cover will protect against direct spray. The release door allows for easy release of trapped animals and baiting of the trap. It weighs 6 pounds and measures 24L x 7W x 7H. These skunk traps are constructed from 1" x 1" - 14 gauge galvanized wire mesh and covered with 24 gauge sheet metal.

Weight: 6 lbs

Size: 24L x 7W x 7H

Wire: 1x1 - 14 GA with Sheet Metal Cover

$89⁷⁵

Select options

306NC2 - Two Door Transfer Cage

CODE:306NC2

Model 306NC2 is our Neighborhood Cats transfer cage designed with 2 easy release sliding doors which allows you to transfer animals from traps to cages safely and securely with little stress to you or the animal. They work perfectly with any of our 10" wide traps such as 606NC, 608NC, 608FN, and also the Neighborhood Cats Drop Trap. This cage features two easy release sliding doors, one on each end. You can use our model C306 Connectors to connect one or two traps to this cage. Or use our C307 connector and connect multiple cages together. You can create a cage recovery system with multiple areas for feeding and litter boxes. . These...

Weight: 8 lbs

Size: 21L x 11W x 12H

Wire: 1x1 - 14 gauge

$89⁷⁵

Select options

C307 - Cage To Cage Connector

CODE:C307

Model C307 is an accessory designed to make feral cat care as stress free as possible. This accessory slides into the rear door slot of transfer cages allowing you to connect multiple transfer cages or squeeze cages together. This product works with model 306, 306NC, and 306NC2 transfer cages and 306SQ, 306NCSQ and 306NC2SQ squeeze cages. Together with trap dividers this product makes it very easy to transfer animals from cages to squeeze cages or create larger recovery spaces by connecting multiple cages together. A separate connection piece is also available to connect traps and cages together. With both model C307 cage to cage...

Weight: 2.5 lbs

$44⁷⁵

Select options

306NCSQ - Squeeze Cage for Feral Cats

CODE:306NCSQ

Model 306NCSQ is a squeeze cage designed specifically for feral cats with all of the Neighborhood Cats features including top latch on easy release door, extra-large top plate, and two extra-large handles. This cage measures 20L x 11W x 12H" and is constructed of 1 x 1" - 14 gauge wire mesh. Squeeze Cages are excellent for vaccinating and examining animals. The internal squeeze panel can be pushed forward until the animal is firmly held between the panel and the opposite side of the cage. This squeeze cage also features a plastic bottom tray for animal feet comfort that is removable for easy cleaning. The squeeze panel arm handles fold...

Weight: 7 lbs

Size: 20L x 11W x 12H

Wire: 1 x 1 - 14 gauge mesh

$105⁵⁰

Select options

306NC2SQ - Squeeze Cage for Feral Cats with Two Sliding Doors

CODE:306NC2SQ

Model 306NCSQ is a squeeze cage designed specifically for feral cats with all of the Neighborhood Cats features including top latch on easy release door, extra-large top plate, and two extra-large handles. This model also features a sliding door on BOTH ends of the cage. This cage measures 20L x 11W x 12H" and is constructed of 1 x 1" - 14 gauge wire mesh. Squeeze Cages are excellent for vaccinating and examining animals. The internal squeeze panel can be pushed forward until the animal is firmly held between the panel and the opposite side of the cage. This squeeze cage also features a plastic bottom tray for animal feet comfort that is...

Weight: 7 lbs

Size: 20L x 11W x 12H

Wire: 1 x 1 - 14 gauge mesh

$124⁷⁵

Select options

475W - White Reptile Den

CODE:475W

Tomahawk model 475 reptile dens are made from durable and weather proof Polyethylene. They last for years and cleanup easily. Eight ¼" holes are drilled into the sides of the den to provide ventilation. These dens features a clear or tinted sliding front door to allow animals to be quickly and easily transferred into or removed from the den. Great for transporting snakes and other reptiles.

$96²⁵

Select options

475G - Gray Reptile Den

CODE:475G

Tomahawk model 475 reptile dens are made from durable and weather proof Polyethylene. They last for years and cleanup easily. Eight ¼" holes are drilled into the sides of the den to provide ventilation. These dens features a clear or tinted sliding front door to allow animals to be quickly and easily transferred into or removed from the den. Great for transporting snakes and other reptiles.

$96²⁵

Select options

475T - Tan Reptile Den

CODE:475T

Tomahawk model 475 reptile dens are made from durable and weather proof Polyethylene. They last for years and cleanup easily. Eight ¼" holes are drilled into the sides of the den to provide ventilation. These dens features a clear or tinted sliding front door to allow animals to be quickly and easily transferred into or removed from the den. Great for transporting snakes and other reptiles.

$96²⁵

Select options

Comstock Chimney Trap

CODE:C59CHIM

Model C59CHIM is a trap designed to capture raccoons living in chimneys, to be dropped into a chimney from the top, and completely hidden from sight. It consists of the trap, trap flap, trap flap chain, trap stop, and chimney top mesh screen. The trap stop allows you to drop the trap into the chimney at any depth you prefer, the chimney top mesh screen will rest under the trap stop to prevent raccoons from entering the chimney and avoiding the trap. The trap flap will prevent raccoons from exiting the chimney and avoiding the trap. To save on shipping and space in transit, all the components fit nicely inside the trap until it is ready to...

Weight: 9 lbs

Size: 30L x 5W x 8H

Wire: 1/2 x 1 - 14 gauge

$255⁰⁰

Minimum quantity for "Comstock Chimney Trap" is 1.

Quantity:

+ −

Add to Cart

Tomahawk Chimney Trap

CODE:TCT12

Model TCT12 - The Tomahawk Chimney Trap is designed to fit over the chimney flue and is easily secured. It features two mounting flaps that can be used to secure the trap and cover larger openings to ensure the raccoon is directed into the trap. The trap is triggered when the raccoon exits the chimney, climbs up the trap, and pulls on the rear panel. This trap measures 36L x 12W x 12H" and is constructed of 1" x 1" – 12 gauge wire mesh frame with ¼" steel reinforcing rods for added strength. This trap also comes with a black powder coat finish.

Weight: 15 lbs

Size: 36L x 12W x 12H

Wire: 1 x 1 - 12 gauge

$175⁰⁰

Quantity:

+ −

Add to Cart

465 - Repeating Plastic Snake Trap

CODE:465

Model 465 is our repeating plastic snake trap designed for catching small and medium size snakes up to 1-½" thick. The trap is made from durable polyethylene and will hold up against the elements for many years. It measures 17L x 12W x 12H. Once a snake passes through the cone shaped trap door, escape is virtually impossible. The trap has a guillotine style release door to make releasing snakes or baiting the trap very easy. There are 8 quarter inch holes drilled into the sides of the trap for ventilation. The trap can be baited with our Strike-UM snake lure.

Weight: 7 Lbs.

Size: 17L x 12W x 12H

Wire: Polyethylene

$106²⁵

Select options

405.5 - Crayfish, Crab & Shrimp Trap

CODE:405.5

Model 405.5 is a multiple catch trap for crayfish, crab, and shrimp. This trap is made from 1x1" galvanized wire mesh and features four, 3" wide cone doors that funnel animals into the trap. This trap also features a 4x4" bait box inside the trap made of ½" x ½" mesh to allow the bait to be seen and smelled but not accessible which allows more animals to enter the trap. One entire side of the trap can be opened to easily remove your catch. This trap measures 24L x 24W x 10H.

Weight: 13 lbs.

Size: 24x24x10

Wire: 1 x 1 - 14 gauge

$139⁷⁵

Select options

460XL - Large Snake Trap with Extension Wings

CODE:460XL

Model 460XL is a large snake trap that functions as a funneling system to catch large snakes for relocation. The funnel opening is 3" in diameter and can be adjusted tighter. The trap comes with a Powder Coated finish to add extra solar heat to the trap enticing snakes to enter. The trap features two 36" wings that can be extended to the sides for funneling snakes into the trap. There is also a removable back door for easy release that features a welded on sheet metal plate for added protection while removing the rear door lock.

Weight: 6 lbs

Size: 36 x 12 x 12

Wire: 1/2 x 1 - 14 gauge

$169⁹⁵

Select options

102.5SS - 5x5 Pro Double Door Trap Featuring One Flush Mount Door

CODE:102.5SS

Model 102.5SS is our Professional Series rigid trap with two trap doors featuring one flush mounted door designed for squirrels, chipmunks and similar sized animals. Double door traps can be used as bait-less runway traps or set only one trap door to use as a traditional single door baited trap. Trap doors at both ends also calms wary animals by allowing them to see through the trap without obstruction and enter with confidence. Our Pro Series double door traps feature one flush mounted door. The flush mount trap door allows for positive sets which means when the trap is armed the door does not extend out past the...

Weight: 4 lbs

Size: 24L x 5W x 5H

Wire: 1/2 x 1 - 14ga

$79⁷⁵

Select options

102SS-F - 5x5 Flush Mount Pro Series Trap

CODE:102SS-F

Model 102SS-F is our Professional Series rigid trap with one flush mount trap door designed for chipmunks, squirrels, and similar size animals. The flush mount trap door allows for positive sets which means when the trap is armed the door does not extend out past the trap frame. This allows the trap to be set flush against den openings on vertical surfaces. When the target animal leaves its den, it must enter the trap. This trap measures 19L x 5W x 5H and weighs 3 lbs. It is constructed from ½ x 1 – 14 gauge galvanized wire mesh for superior strength and durability. Pro Series traps feature a very strong wire frame...

Weight: 3 lbs

Size: 19 x 5 x 5

Wire: 1/2 x 1 - 14 gauge

$59⁷⁵

Select options

103SS-F - 6x6 Flush Mount Pro Series Trap

CODE:103SS-F

Model 103SS-F is our Professional Series rigid trap with one flush mount trap door designed for chipmunks, squirrels, and similar size animals. The flush mount trap door allows for positive sets which means when the trap is armed the door does not extend out past the trap frame. This allows the trap to be set flush against den openings on vertical surfaces. When the target animal leaves its den, it must enter the trap. This trap measures 21L x 6W x 6H and weighs 4 lbs. It is constructed from ½ x 1 – 14 gauge galvanized wire mesh for superior strength and durability. Pro Series traps feature a very strong wire frame...

Weight: 4 lbs

Size: 21 x 6 x 6

Wire: 1/2 x 1 - 14 gauge

$59⁷⁵

Select options

106SS-F - 9x9 Pro Series Flush Mount Trap

CODE:106SS-F

Model 106SS-F is our Professional Series rigid trap with one flush mount trap door designed for cats, rabbits, and similar size animals. The flush mount trap door allows for positive sets which means when the trap is armed the door does not extend out past the trap frame. This allows the trap to be set flush against den openings on vertical surfaces. When the target animal leaves its den, it must enter the trap. This trap measures 30L x 9W x 9H and weighs 8 lbs. It is constructed from ½ x 1 – 14 gauge galvanized wire mesh for superior strength and durability. Pro Series traps feature a very strong wire frame with a...

Weight: 8 lbs

Size: 30 x 9 x 9

Wire: 1/2 x 1 - 14 gauge

$89⁷⁵

Select options

109SS-F - 12x12 Pro Series Flush Mount Trap

CODE:109SS-F

Model 109SS-F is our Professional Series rigid trap with one flush mount trap door designed for raccoons, woodchucks, armadillos, and similar size animals. The flush mount trap door allows for positive sets which means when the trap is armed the door does not extend out past the trap frame. This allows the trap to be set flush against den openings on vertical surfaces. When the target animal leaves its den, it must enter the trap. This trap measures 42L x 12W x 12H and weighs 16 lbs. It is constructed from ½ x 1 – 14 gauge galvanized wire mesh for superior strength and durability. Pro Series traps feature a very...

Weight: 16 lbs

Size: 42 x 12 x 12

Wire: 1/2 x 1 - 14 gauge

$145⁷⁵

Select options

602SS-F - 5x5 Pro Series Flush Mount Trap with Easy Release Rear Access Door

CODE:602SS-F

Model 602SS-F is our Professional Series rigid trap with one flush mount trap door and easy release rear door designed for chipmunks, squirrels, and similar size animals. The flush mount trap door allows for positive sets which means when the trap is armed the door does not extend out past the trap frame. This allows the trap to be set flush against den openings on vertical surfaces. When the target animal leaves its den, it must enter the trap. This trap measures 19L x 5W x 5H and weighs 3 lbs. It is constructed from ½ x 1 – 14 gauge galvanized wire mesh for superior strength and durability. Pro Series traps feature...

Weight: 3 lbs

Size: 19 x 5 x 5

Wire: 1/2 x 1 - 14 gauge

$68⁷⁵

Select options

603SS-F - 6x6 Pro Series Flush Mount Trap with Easy Release Rear Access Door

CODE:603SS-F

Model 603SS-F is our Professional Series rigid trap with one flush mount trap door and easy release rear door designed for chipmunks, squirrels, and similar size animals. The flush mount trap door allows for positive sets which means when the trap is armed the door does not extend out past the trap frame. This allows the trap to be set flush against den openings on vertical surfaces. When the target animal leaves its den, it must enter the trap. This trap measures 21L x 6W x 6H and weighs 4 lbs. It is constructed from ½ x 1 – 14 gauge galvanized wire mesh for superior strength and durability. Pro Series traps...

Weight: 4 lbs

Size: 21 x 6 x 6

Wire: 1/2 x 1 - 14 gauge

$68⁷⁵

Select options

606SS-F - 9x9 Pro Series Flush Mount Trap with Easy Release Rear Access Door

CODE:606SS-F

Model 606SS-F is our Professional Series rigid trap with one flush mount trap door and easy release rear door designed for cats, rabbits, and similar size animals. The flush mount trap door allows for positive sets which means when the trap is armed the door does not extend out past the trap frame. This allows the trap to be set flush against den openings on vertical surfaces. When the target animal leaves its den, it must enter the trap. This trap measures 30L x 9W x 9H and weighs 8 lbs. It is constructed from ½ x 1 – 14 gauge galvanized wire mesh for superior strength and durability. Pro Series traps feature a very...

Weight: 8 lbs

Size: 30 x 9 x 9

Wire: 1/2 x 1 - 14 gauge

$97⁷⁵

Select options

609SS-F - 12x12 Pro Series Flush Mount Trap with Easy Release Rear Access Door

CODE:609SS-F

Model 609SS-F is our Professional Series rigid trap with one flush mount trap door and easy release rear door designed for raccoons, woodchucks, armadillos, and similar size animals. The flush mount trap door allows for positive sets which means when the trap is armed the door does not extend out past the trap frame. This allows the trap to be set flush against den openings on vertical surfaces. When the target animal leaves its den, it must enter the trap. This trap measures 42L x 12W x 12H and weighs 16 lbs. It is constructed from ½ x 1 – 14 gauge galvanized wire mesh for superior strength and durability. Pro...

Weight: 16 lbs

Size: 42 x 12 x 12

Wire: 1/2 x 1 - 14 gauge

$158⁷⁵

Select options

TK362026C - Collapsible Dog Kennel Crate - 36x20x26

CODE:TK362026C

Model TK362026C is a professional grade, collapsible dog kennel crate for temporary housing and transfer of dogs. It is constructed of heavy duty 1x1 - 12ga galvanized wire mesh. This crate collapses to just 3" in height for easy storage when not in use. It also features a removable, easy to clean metal tray on the bottom and two large handles for easy carrying. The door swings out to open and secures shut with a frame hook style latch and heavy duty leash style clip. This crate measures 36" long x 20" wide x 26" tall.

Weight: 28 lbs

Size: 36L x 20W x 26H

Wire: 1x1 - 12ga

$300⁰⁰

Select options

TK362026R - Dog Kennel Crate - 36x20x26

CODE:TK362026R

Model TK362026R is a professional grade, non-collapsible dog kennel crate for temporary housing and transfer of dogs. It is constructed of heavy duty 1x1 - 12ga galvanized wire mesh. It features a removable, easy to clean metal tray on the bottom and two large handles for easy carrying. The door swings out to open and secures shut with a frame hook style latch and heavy duty leash style clip. This crate measures 36" long x 20" wide x 26" tall.

Weight: 28 lbs

Size: 36L x 20W x 26H

Wire: 1x1 - 12ga

$275⁰⁰

Select options

425 - Funnel Fish Trap

CODE:425

Model 425 is our funnel style fish trap for catfish and rough fish. It features a 3 cone funnel system, release door, and bait compartment. The frame is constructed from 1 x 2 – 12 gauge mesh and the cones are 1 x 1 – 14 mesh. This is a durable fish trap build to last for years. It measures 52L x 19W x 19H.

Weight: 19 lbs

Size: 52L x 19W x 19H

Wire: 1 x 2 - 12ga frame with 1x1 - 14ga funnels

$225⁰⁰

Select options

Ton Jones Rattlesnake Hook

CODE:TJRH

Ton Jones Series Rattlesnake Hook. The Shaft is constructed from an aluminum Tube and features a non-slip neoprene grip. The hook end is made from 9/32" stainless steel that is powder coated for extra durability. The hook has two rods welded together to create a cradle for handling larger rattlesnakes and giving them the proper support. The hook has a 3 ½" opening. This hook come in 3 different sizes 36", 48", and 60". You can also get this hook with a heavy duty handle for more strength when dealing with heavy bodied animals.

$56⁷⁵

Select options

28" Standard Snake Hook with XL Head

CODE:323-20

The Tomahawk Model 323-20, is our 28" long standard snake hook with an extra-large 6" head opening. The head is constructed from 9/32" stainless steel rod and the handle from aircraft grade anodized aluminum tube. This is a strong light weight hook made to deal with large snakes such as pythons and Boas. This tool is very durable but also extremely light for all day use under any conditions.

Weight: 1.3 lb

Size: 28"

Wire: Aluminum Tube & Stainless Steel Hook

$44²⁵

Quantity:

+ −

Add to Cart

38" Standard Snake Hook with XL Head

CODE:323-30

The Tomahawk Model 323-30, is our 38" long standard snake hook with an extra-large 6" head opening. The head is constructed from 9/32" stainless steel rod and the handle from aircraft grade anodized aluminum tube. This is a strong light weight hook made to deal with large snakes such as pythons and Boas. This tool is very durable but also extremely light for all day use under any conditions.

Weight: 1.7 lb

Size: 38"

Wire: Aluminum Tube & Stainless Steel Hook

$44²⁵

Quantity:

+ −

Add to Cart

48" Standard Snake Hook with XL Head

CODE:323-40

The Tomahawk Model 323-40, is our 48" long standard snake hook with an extra-large 6" head opening. The head is constructed from 9/32" stainless steel rod and the handle from aircraft grade anodized aluminum tube. This is a strong light weight hook made to deal with large snakes such as pythons and Boas. This tool is very durable but also extremely light for all day use under any conditions.

Weight: 2.2 lbs

Size: 48"

Wire: Aluminum Tube & Stainless Steel Hook

$44²⁵

Quantity:

+ −

Add to Cart

Free shipping

ArmOR Hand Procedural Handling Gloves with Three Open Fingers

CODE:ARMHFIN

ArmOR Hand Procedure gloves are made for a tight fit. Please check the sizing chart below for correct size fitting. The ArmOR Hand Procedure Animal Handling Gloves are made of all synthetic materials and offer hand and arm coverage up to the elbow. These gloves fit tight and offer a lot of dexterity for fine motor skills. The three open fingers allow for precise fine motor skills. Reinforced high-injury areas provide additional protection. Outer layer made of durable stretch cordura. Hand lined with double knit Kevlar. Water resistant and machine washable. All animal handling gloves are bite resistant. No glove should ever be considered...

$195⁰⁰

Select options

Free shipping

The Intimidator - Woodpecker / Avian Deterrent

CODE:INTD1

The Intimidator is a professional grade avian deterrent which uses motion and bright flashing to scare away woodpeckers and other birds from unwanted areas. Woodpeckers can cause serious damage to homes and other buildings. This deterrent is lightweight and needs very little air current to create a dynamic visual effect that frightens birds. Dimensions of the Intimidator flashing pieces are 14"L x 4" Wide. Comes with a 17" mounting arm.

$29⁵⁰

Quantity:

+ −

Add to Cart

Mini Dura-Flex Net with 2' Handle

CODE:LH101

Mini Dura-Flex Nets are designed specifically to capture animals up to 20 lbs. They feature solid ½" nylon hoops, long neoprene grips, woven ¼" nylon tangle free mesh netting, two layered 1/8" woven nylon hem, tie-off cord, and heavy aluminum shafts. Model LH101 has a 2' handle with an overall length of 3-½ feet with net attached. These are extremely durable yet light weight nets that are easy to use, and the tangle free ¼" mesh minimizes stress to netted animals. The mesh net has a 14W"x 16L" opening and is 44" deep

$109⁹⁵

Quantity:

+ −

Add to Cart

Mini Dura-Flex Net with 3' Handle

CODE:LH102

Mini Dura-Flex Nets are designed specifically to capture animals up to 20 lbs. They feature solid ½" nylon hoops, long neoprene grips, woven ¼" nylon tangle free mesh netting, two layered 1/8" woven nylon hem, tie-off cord, and heavy aluminum shafts. Model LH102 has a 3' handle with an overall length of 4-½ feet with net attached. These are extremely durable yet light weight nets that are easy to use, and the tangle free ¼" mesh minimizes stress to netted animals. The mesh net has a 14W"x 16L" opening and is 44" deep.

$114⁹⁵

Quantity:

+ −

Add to Cart

Mini Dura-Flex Net with 4' Handle

CODE:LH103

Mini Dura-Flex Nets are designed specifically to capture animals up to 20 lbs. They feature solid ½" nylon hoops, long neoprene grips, woven ¼" nylon tangle free mesh netting, two layered 1/8" woven nylon hem, tie-off cord, and heavy aluminum shafts. Model LH103 has a 4' handle with an overall length of 5-½ feet with net attached. These are extremely durable yet light weight nets that are easy to use, and the tangle free ¼" mesh minimizes stress to netted animals. The mesh net has a 14W"x 16L" opening and is 44" deep.

$119⁹⁵

Quantity:

+ −

Add to Cart

424 - Perch and Minnow Trap with Adjustable Funnel

CODE:424

Model 424 is our funnel style perch and minnow trap. It features two funnels, one on each end to funnel perch or bait fish into the trap. Included are 3 sets of cone adapters to adjust the cone opening for specific sized fish. The base opening of the cone measures 4" x 4" and the adapters can reduce the funnel cone to measure 3" x 3", 2" x 2" or 1" x 1". Simply zip-tie or hog ring the appropriate cone adapters into the funnels. This trap also features an easy release door to remove your catch and bait the trap. Frame and funnels are constructed from ½ x ½ – 16 gauge galvanized after weld mesh. This trap measures 30L x 15W x 15H".

Weight: 12 lbs

Size: 30L x 15W x 15H"

Wire: 1/2 x 1/2 - 16 gauge GAW

$175⁰⁰

Select options

406DD - Double Door XL Fish Trap

CODE:406DD

Model 406DD is our double door extra large fish trap featuring two funnel style trap doors. This heavy duty trap measures 42L x 15WL x 15H" and is constructed from 1x1" – 14 gauge galvanized wire mesh. The funnel style doors measure 4" in diameter and are adjustable by bending the tines in or out.This trap is designed to catch and hold multiple fish and also features a convenient release / bait door to allow you to bait the trap and release your catch.

Weight: 13 lbs

Size: 42L x 15W x 15H"

Wire: 1 x 1 - 14 gauge

$130⁰⁰

Select options

Snake & Reptile Bucket Lid

CODE:RCBL

Model RCBL is our reptile containment lid for both 3 and 5 gallon buckets. The lids are made in the USA from food grade plastic resin for the protection of your reptiles. It is a two part lid with an outer ring that snaps onto the bucket and an inner removable lid that simply spins onto the outer ring and locks in place. The inner lid has 36 drilled 1/8" air holes with each air hole protected by 1" lid reinforcement wedges making it impossible for snakes to get fangs through the air holes. This lid will fit any bucket with an 11.25 inside diameter and 11.875 outside diameter lip.

$12⁰⁰

Quantity:

+ −

Add to Cart

Search By Animal

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Extras

My Account

Customer Service

Tomahawk Live Trap

Search By Animal

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media