Eviction Equipment - One Way Doors

Flying Squirrel Eviction Door by Wildman Products

CODE:WMP33

The Eviction Door "No-Fly Zone!" is a one-way excluder door designed to evict nuisance squirrels from structures. It features attached mounting wings, which allow for easy installation over the den's point of entry. The Eviction Door allows animals to exit, and prevents them from reentering. This Eviction Door measures 3 in x 3 in x 2 in and is designed for smaller squirrels (e.g., flying squirrels, red squirrels and other small rodents). It is constructed with heavy duty 14 gauge wire mesh and features a galvanized steel door. Message from inventor Wildman Mark: My goal when building the Eviction Door was to create an excluder...

Weight: 1 lb

Size: 2L x 4W x 4H

Wire: 1/2 x 1 - 14 gauge

$39⁹⁵

Select options

Squirrel Eviction Door by Wildman Products

CODE:WMP44

The eviction door is a one-way excluder door designed to evict nuisance squirrels from structures. The Eviction Door features mounting wings, which allow for easy installation over the den's point of entry. The Eviction Door allows animals to exit, and prevents them from reentering. This Eviction Door measures 4 in x 4 in x 2 in and is designed for large tree squirrels. It is constructed with heavy-duty 14 gauge wire mesh frame and features a galvanized steel door. The compact design of these eviction doors is excellent for saving storage space and also for deployment in tight areas where traditional one way doors cannot fit. The unique...

Weight: 1 lbs

Size: 2L x 4W x 4H

Wire: 1/2 x 1 - 14 gauge

$45⁰⁰

Select options

Bird Eviction Door by Wildman Products

CODE:WMP44BD

This Bird Eviction Door is designed to let birds out of an entry point on a structure. Let birds remove themselves by installing the eviction door over the entry point with the included mounting tabs. Birds can easily push the clear acrylic door open but cannot push it in to gain re-entry. This eviction door measures 4" wide x 4" tall and is only 2" thick for easy placement even in tight areas. It is constructed of 1/2" x 1" - 14ga galvanized wire mesh and 1/8" thick clear acrylic.

Weight: 1 lbs

Size: 11L x 4W x 4H

Wire: 1/2 x 1 - 14 gauge + Clear Acrylic

$45⁰⁰

Quantity:

+ −

Add to Cart

E30 - Excluder for Chipmunks, Flying Squirrels, Small Rodents

CODE:E30

Model E30 is an excluder with a one way door for squirrels, small rodents and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. This excluder measures 3 x 3 x 12" and is designed to fit over 3 x 3" or smaller openings. It is constructed of heavy duty 1/2" x 1" - 14 guage wire mesh.

Weight: 1 lbs

Size: 12L x 3H x 3W

Wire: 1/2 x 1 - 14 gauge

$27⁷⁵

Select options

E35 - Excluder for Chipmunks, Flying Squirrels, and Small Rodents

CODE:E35

Model E35 is an excluder with a one way door for chipmunks, flying squirrels, and small rodents. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. This excluder measures 3.5 x 3.5 x 12" and is designed to fit over 3.5 x 3.5" or smaller openings. It is constructed of heavy duty 1/2" x 1" - 14 gauge wire mesh.

Weight: 2 lbs

Size: 12L x 3.5W x 3.5H

Wire: 1 x 1/2 - 14 gauge

$28²⁵

Select options

E40 - Excluder for Squirrels and Similar Size Animals

CODE:E40

Model E40 is an excluder with a one way door for squirrels and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. This excluder measures 4 x 4 x 12" and is designed to fit over 4 x 4" or smaller openings. It is constructed of heavy duty 1/2" x 1" - 14 gauge wire mesh.

Weight: 1 lbs

Size: 12L x 4W x 4H

Wire: 1/2 x 1 - 14 gauge

$28⁹⁸

Select options

E50 - Excluder for Squirrels, Rats

CODE:E50

Model E50 is an excluder for squirrels, rats and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals entry/exit point. The one way door lets animals exit and prevents them from entering. This excluder measures 5 x 5 x 12" and is designed to fit over 5 x 5" or smaller openings. It is constructed of heavy duty 1/2" x 1" - 14 gauge wire mesh.

Weight: 1 lbs

Size: 12L x 5W x 5H

Wire: 1/2 x 1 - 14 gauge

$30⁰⁰

Select options

E60 - Excluder for Skunk, Cats, Rabbits, Opossums and Similar Size Animals

CODE:E60

Model E60 is an excluder with a one way door for skunks, cats, rabbits, opossums, and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from entering. This excluder measures 6 x 6 x 12" and is designed to fit over 6 x 6" or smaller openings. It is constructed of heavy duty 1" x 1" - 14 gauge wire mesh.

Weight: 2 lbs

Size: 12L x 6W x 6H

Wire: 1 x 1 - 14 gauge

$36⁰⁰

Select options

E70 - Excluder for Skunks, Cats, Rabbits, Opossum, and Similar Size Animals

CODE:E70

Model E70 is an excluder with a one way door for skunks, opossums, cats, rabbits, and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from entering. This excluder measures 7 x 7 x 12" and is designed to fit over 7 x 7" or smaller openings. It is constructed of heavy duty 1" x 1" - 14 gauge wire mesh.

Weight: 2 lbs

Size: 12L x 7W x 7H

Wire: 1x1 - 14 gauge

$42⁰⁰

Select options

E80 - Excluder for Raccoons, Feral Cats, and Similar Size Animals

CODE:E80

Model E80 is an excluder with a one way door for skunks, opossums, cats and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from entering. This excluder measures 8 x 8 x 14" and is designed to fit over 8 x 8" or smaller openings. It is constructed of heavy duty 1" x 1" - 14 gauge wire mesh.

Weight: 3 lbs

Size: 14L x 8W x 8H

Wire: 1 x 1 - 14 gauge

$48⁰⁰

Select options

E80CG - Raccoon Excluder With Door Stop

CODE:E80CG

This excluder is specifically designed for raccoon. It features a door stop panel to prevent raccoons from pulling the door open from the outside. Attach the excluder over an entry/exit point with screws, nails or heavy duty staples. Raccoon can exit from the inside but cannot gain entry. This excluder measures 8 x 8 x 14" and is designed to fit over 8 x 8" or smaller openings. It is constructed of heavy duty 1" x 1" - 14 gauge wire mesh.

Weight: 3 lbs

Size: 14L x 8W x 8H

Wire: 1 x 1 - 14 Gauge

$54⁰⁰

Select options

G100 - 3"x3" Ground Hugger Multiple Catch Trap

CODE:G100

Model G100 is a positive set multiple catch repeating trap for chipmunks, gophers and ground squirrels. It features a bottom opening that is designed to be set directly over an animal burrow entry point. It is is equipped with two U-Spikes that push into the ground securing it over an animals burrow. This trap measures 14L x 3W x 3H and is constructed of 1/2" x 1" - 14 gauge wire mesh. It is designed to fit over 3 x 3" or smaller ground holes. If the entry point is wider use rocks or other hard materials around the trap to fill in any gaps and force the animal to enter the trap when exiting the den.

Weight: 2 lbs

Size: 14L x 3W x 3H

Wire: 1/2 x 1 - 14 gauge

$40⁷⁵

Select options

G110 - 4x4x24" Ground Hugger Multiple Catch Trap

CODE:G110

Model G110 is a positive set multiple catch repeating trap for chipmunks, gophers and ground squirrels. It features a bottom opening that is designed to be set directly over an animal burrow entry point. It is is equipped with two U-Spikes that push into the ground securing it over an animals burrow. This trap measures 24L x 4W x 4H" and is constructed of 1/2" x 1" - 14 gauge wire mesh. It is designed to fit over 4 x 4" and smaller ground holes. If the entry point is wider use rocks or other hard materials around the trap to fill in any gaps and force the animal to enter the trap when exiting the den.

Weight: 3 lbs

Size: 24L x 4W x 4H

Wire: 1/2 x 1 - 14 gauge

$47⁵⁰

Select options

E30D - 3"x3" Excluder with Rear Door for Chipmunks, Flying Squirrels, Small Rodents

CODE:E30D

Model E30D is an excluder trap with an easy release rear door for small rodents and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 19L x 3W x 3H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 3 x 3" or smaller openings.

Weight: 1 lbs

Size: 19L x 3W x 3H

Wire: 1/2 x 1 - 14 gauge

$41⁵⁰

Select options

E90 - Excluder for Raccoons, Opossum, and Similar Size Animals

CODE:E90

Model E90 is an excluder with a one way door for raccoons, skunks, opossums, cats and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from entering. This excluder measures 20L x 9W x 9H" and is designed to fit over 9 x 9" or smaller openings. It is constructed of heavy duty 1" x 1" - 14 gauge wire mesh.

Weight: 4 lbs

Size: 20L x 9W x 9H

Wire: 1 x 1 - 14 gauge

$60⁰⁰

Select options

E40D - 4"x4" Excluder With Rear Door for Chipmunks, Squirrels

CODE:E40D

Model E40D is an excluder trap with an easy release door for chipmunks, squirrels and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 26L x 4W x 4H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 4 x 4" or smaller openings.

Weight: 2 lbs

Size: 26L x 4W x 4H

Wire: 1/2 x 1 - 14 gauge

$43⁵⁰

Select options

E90CG - Raccoon Excluder With Door Stop

CODE:E90CG

Model E90CG is an excluder with one way door and door stop designed for raccoons, skunks, opossums, cats and similar size animals. It features a door stop panel to prevent animals from pulling the door open from the outside and entering. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from entering. This excluder measures 20L x 9W x 9H" and is designed to fit over 9 x 9" or smaller openings. It is constructed of heavy duty 1" x 1" - 14 gauge wire mesh.

Weight: 4 lbs

Size: 20L x 9W x 9H

Wire: 1 x 1 - 14 Gauge

$65⁹⁵

Select options

E50D - 5"x5" Excluder with Rear Door for Squirrels, Rats

CODE:E50D

Model E50D is an excluder trap with an easy release door for rats, squirrels and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 26L x 5W x 5H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 5 x 5" or smaller openings.

Weight: 3 lbs

Size: 26L x 5W x 5H

Wire: 1/2 x 1 - 14 gauge

$45²⁵

Select options

E60D - 6"x6" Excluder with Rear Door for Skunks, Cats, Rabbits, Opossums

CODE:E60D

Model E60D is an excluder trap with an easy release door for cats, skunks and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 26L x 6W x 6H" and is constructed of heavy duty 1 x 1" - 14 gauge wire mesh. It is designed to fit over 6 x 6" or smaller openings.

Weight: 3 lbs

Size: 26L x 6W x 6H

Wire: 1 x 1 - 14 gauge

$54⁰⁰

Select options

E70D - 7"x7" Excluder With Rear Door for Skunks, Cats, Rabbits, Opossums

CODE:E70D

Model E70D is an excluder trap with an easy release door for cats, rabbits, opossums, and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 30L x 7W x 7H" and is constructed of heavy duty 1 x 1" - 14 gauge wire mesh. It is designed to fit over 7 x 7" or smaller openings.

Weight: 4 lbs

Size: 30L x 7W x 7H

Wire: 1 x 1 - 14 gauge

$63⁰⁰

Select options

E80D - 8"x8" Excluder With Rear Door for Raccoons, Feral Cats, Skunks, Large Rodents

CODE:E80D

Model E80D is an excluder trap with an easy release door for opossum, cats, large rodents and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 30L x 8W x 8H" and is constructed of heavy duty 1 x 1" - 14 gauge wire mesh. It is designed to fit over 8 x 8" or smaller openings.

Weight: 6 lbs

Size: 30L x 8W x 8H

Wire: 1 x 1 - 14 gauge

$72⁰⁰

Select options

E100 - Excluder for Raccoons, Opossum, and Similar Size Animals

CODE:E100

Model E100 is an excluder with a one way door for raccoons, skunks, opossums, cats and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from entering. This excluder measures 20L x 10W x 10H" and is designed to fit over 10 x 10" or smaller openings. It is constructed of heavy duty 1" x 1" - 14 gauge wire mesh.

Weight: 6 lbs

Size: 20L x 10W x 10H

Wire: 1 x 1 - 14 gauge

$65⁹⁵

Select options

E100CG - Raccoon Excluder With Door Stop

CODE:E100CG

Model E100CG is an excluder with one way door and door stop designed for raccoons, skunks, opossums, cats and similar size animals. It features a door stop panel to prevent animals from pulling the door open from the outside and entering. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from entering. This excluder measures 20L x 10W x 10H" and is designed to fit over 10 x 10" or smaller openings. It is constructed of heavy duty 1" x 1" - 14 gauge...

Weight: 6 lbs

Size: 20L x 10W x 10H

Wire: 1 x 1 - 14 Gauge

$71⁵⁰

Select options

SP30 - Squirrel Pack Small - With One Trap Door and Easy Release Door

CODE:SP30

Let the critters remove themselves with the SP30 Squirrel Pack System. Perfect for smaller rodents such as flying squirrels and red squirrels. It is extremely simple to use and very effective. SP30 consists of one E30 excluder and two SPT30 repeating traps. The repeating traps have one trap door and and an easy release rear door. Attach E30 excluder over the animals den opening by tacking up the mounting wings with screws or heavy duty staples. Slide one of the SPT30 repeating traps over the E30 excluder and hook into place. As critters exit, the excluder will direct them into the repeating trap. To remove captured animals from the...

Weight: 4 lbs

Size: Consists of 1-E30 and 2-SPT30's

Wire: ½ x 1 - 14 gauge

$86¹⁸

Select options

SPT30 - Repeating Trap for SP30 Squirrel Pack

CODE:SPT30

SPT30 Repeating Trap is used with a 3" x 3" - model E30 excluder to create an SP30 Squirrel Pack. These repeating traps slide over excluders / one way doors and have one recessed trap door in front and an easy release rear door on the back. This trap measures 26L x 3.5W x 3.5H" and is constructed of 1/2 x 1" - 14ga wire mesh.

Weight: 2 Lbs

Size: 26L x 3.5W x 3.5H

Wire: 0.5" x 1" - 14 gauge

$34⁰⁰

Select options

DSP30 - 3x3" Deluxe Squirrel Pack with One Trap Door and Easy Release Door

CODE:DSP30

DSP30 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E30, one soffit cone model SC30, one inside corner cone model CC30, and two repeating traps with one trap door and easy release door model SPT30. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP30 is made to fit over 3" x 3" wide and smaller openings.

$136⁸⁰

Select options

SPT35 - Repeating Trap for SP35 Squirrel Pack

CODE:SPT35

Model SPT35 Repeating Trap is used with an E30 - 3" x 3" excluder to create an SP35 Squirrel Pack. SPT35 repeating traps slide over excluders / one way doors and have trap doors at each end to allow you to capture animals both leaving and entering the den. One trap door is recessed so that the trap can easily be attached over the excluder / one way door. This trap measures 26L x 3.5W x 3.5H" and is constructed of 1/2" x 1" - 14 gauge wire mesh.

Weight: 2 lbs

Size: 26" x 3.5" x 3.5"

Wire: 0.5" x 1" - 14 gauge

$34⁰⁰

Select options

SP35 - Squirrel Pack Small - With Two Trap Doors

CODE:SP35

Let the critters remove themselves with this system. SP35 is perfect for smaller critters such as flying squirrels and red squirrels. It's extremely simple to use and very effective. SP35 consists of one E30 excluder and two SPT35 repeating traps (with two trap doors). Attach the E30 excluder over the animals den opening with the mounting wings. Slide one of the SPT35 repeating traps over the E30 and hook into place. As critters exit, the excluder will direct them into the repeating trap. SPT35 repeating traps have trap doors at each end to allow you to caputre animals both leaving and entering the den. To remove trapped animals,...

Weight: 4 lbs

Size: Consists of 1-E30 and 2-SPT35's

Wire: 1/2 x 1 - 14 gauge

$86¹⁸

Select options

DSP35 - 3x3" Deluxe Squirrel Pack with Two Trap Doors

CODE:DSP35

DSP35 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E30, one soffit cone model SC30, one inside corner cone model CC30, and two repeating traps with two trap doors model SPT35. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP35 is made to fit over 3" x 3" wide or smaller openings.

$136⁸⁰

Select options

SP40 - Squirrel Pack Medium - With One Trap Door and Easy Release Door

CODE:SP40

Let the critters remove themselves with the SP40 Squirrel Pack System. Perfect for red squirrels, grey squirrels, and similar size animals. It is extremely simple to use and very effective. SP40 consists of one E40 excluder and two SPT40 repeating traps. The repeating traps have one trap door and and an easy release rear door. Attach E40 over the animals den opening with the mounting wings. Slide one of the SPT40 repeating traps over the E40 excluder and hook into place. As critters exit, the excluder will direct them into the repeating trap. To remove captured animals from the property, simply unhook the SPT40 repeating trap and replace...

Weight: 5 lbs

Size: Consists of 1-E40 and 2-SPT40's

Wire: ½ x 1 - 14 gauge

$97⁶³

Select options

SPT40 - Repeating Trap for SP40 Squirrel Pack

CODE:SPT40

SPT40 Repeating Trap is used with an E40 - 4" x 4" excluder to create an SP40 Squirrel Pack. These repeating traps slide over excluders / one way doors and have one recessed trap door in front and an easy release rear door on the back. This trap measures 30L x 4W x 4H" and is constructed of 1/2 x 1" - 14ga wire mesh.

Weight: 3

Size: 30L x 4.5W x 4.5H

Wire: 0.5 x 1 - 14 gauge

$39⁷⁵

Select options

DSP40 - 4x4" Deluxe Squirrel Pack with One Trap Door and Easy Release Door

CODE:DSP40

DSP40 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E40, one soffit cone model SC40, one inside corner cone model CC40, and two repeating traps with one trap door and easy realease door model SPT40. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP40 is made to fit over 4" x 4" wide or smaller openings.

$150²⁸

Select options

SPT45 - Repeating Trap for SP45 Squirrel Pack

CODE:SPT45

Model SPT45 Repeating Trap is used with an E40 - 4" x 4" excluder to create an SP45 Squirrel Pack. SPT45 repeating traps slide over excluders / one way doors and have trap doors at each end to allow you to capture animals both leaving and entering the den. One trap door is recessed so that the trap can easily be attached over the excluder / one way door. This trap measures 30L x 4.5W x 4.5H" and is constructed of 1/2" x 1" - 14 gauge wire mesh.

Weight: 3 lbs

Size: 30 x 4.5 x 4.5

Wire: ½ x 1 - 14 gauge

$39⁷⁵

Select options

SP45 - Squirrel Pack Medium - With Two Trap Doors

CODE:SP45

Let the critters remove themselves with this system. SP45 is perfect for red and grey squirrels and similar sized rodents. It's extremely simple to use and very effective. SP45 consists of one E40 excluder and two SPT45 repeating traps (with two trap doors). Attach the E40 excluder over the animals den opening with the mounting wings. Slide one of the SPT45 repeating traps over the E40 and hook into place. As critters exit, the excluder will direct them into the repeating trap. SPT45 repeating traps have trap doors at each end to allow you to caputre animals both leaving and entering the den. To remove trapped animals, unhook the SPT45...

Weight: 5 lbs

Size: Consists of 1-E40 and 2-SPT45's

Wire: 1/2 x 1 - 14 gauge

$97⁶³

Select options

DSP45 - 4x4" Deluxe Squirrel Pack with Two Trap Doors

CODE:DSP45

DSP45 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E40, one soffit cone model SC40, one inside corner cone model CC40, and two repeating traps with two trap doors model SPT45. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP45 is made to fit 4" x 4" wide or smaller openings.

$150²⁸

Select options

SP50 - Squirrel Pack Large - With One Trap Door and Easy Release Door

CODE:SP50

Let the critters remove themselves with the SP50 Squirrel Pack System. Perfect for grey and fox squirrel size animals. It is extremely simple to use and very effective. SP50 consists of one E50 excluder and two SPT50 repeating traps. The repeating traps have one trap door and and an easy release rear door. Attach E50 over the animals den opening with the mounting wings. Slide one of the SPT50 repeating traps over the E50 excluder and hook into place. As critters exit, the excluder will direct them into the repeating trap. To remove captured animals from the property, simply unhook the SPT50 repeating trap and replace it with the other...

Weight: 6 lbs

Size: Consists of 1-E50 and 2-SPT50's

Wire: 1/2 x 1 - 14 gauge

$108⁹⁰

Select options

SPT50 - Repeating Trap for SP50 Squirrel Pack

CODE:SPT50

SPT50 Repeating Trap is used with an E50 - 5" x 5" excluder to create an SP50 Squirrel Pack. These repeating traps slide over excluders / one way doors and have one recessed trap door in front and an easy release rear door on the back. This trap measures 36L x 5.5W x 5.5H" and is constructed of 1/2" x 1" - 14 gauge wire mesh.

Weight: 4 lbs

Size: 36L x 5.5W x 5.5H

Wire: 0.5 x 1 - 14 gauge

$45⁵⁰

Select options

DSP50 - 5x5" Deluxe Squirrel Pack with One Trap Door and Easy Release Door

CODE:DSP50

DSP50 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E50, one soffit cone model SC50, one inside corner cone model CC50, and two repeating traps with one trap door and easy release door model SPT50. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP50 is made to fit over 5" x 5" wide or smaller openings.

$164⁷⁰

Select options

SPT55 - Repeating Trap for SP55 Squirrel Pack

CODE:SPT55

Model SPT55 Repeating Trap is used with an E50 - 5" x 5" excluder to create an SP55 Squirrel Pack. SPT55 repeating traps slide over excluders / one way doors and have trap doors at each end to allow you to capture animals both leaving and entering the den. One trap door is recessed so that the trap can easily be attached over the excluder / one way door. This trap measures 36L x 5.5W x 5.5H" and is constructed of 1/2" x 1" - 14 gauge wire mesh.

Weight: 4 lbs

Size: 36L x 5.5W x 5.5H

Wire: 1/2 x 1 - 14 gauge

$45⁵⁰

Select options

SP55 - Squirrel Pack Large - With Two Trap Doors

CODE:SP55

Let the critters remove themselves with this system. SP55 is perfect for fox and grey squirrels and similar sized rodents. It's extremely simple to use and very effective. SP55 consists of one E50 excluder and two SPT55 repeating traps (with two trap doors). Attach the E50 excluder over the animals den opening with the mounting wings. Slide one of the SPT55 repeating traps over the E50 and hook into place. As critters exit, the excluder will direct them into the repeating trap. SPT55 repeating traps have trap doors at each end to allow you to caputre animals both leaving and entering the den. To remove trapped animals, unhook the SPT55...

Weight: 6 lbs

Size: Consists of 1-E50 and 2-SPT55's

Wire: 1/2 x 1 - 14 gauge

$108⁹⁰

Select options

DSP55 - 5x5" Deluxe Squirrel Pack with Two Trap Doors

CODE:DSP55

DSP55 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E50, one soffit cone model SC50, one inside corner cone model CC50, and two repeating traps with two trap doors model SPT55. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP55 is made to fit over 5" x 5" wide or smaller openings.

$164⁷⁰

Select options

3" x 3" Pro Excluder Trap for Squirrels

CODE:E30D-SS

Model E30D-SS is our 3" x 3" Professional Series Excluder Trap. Our Pro Excluders feature an easy release rear door that opens to the side for easy transfer even when mounted; extra wings to create directional funnels when needed; and a toe jammer to prevent even the smartest trapped squirrels from exiting the trap. The multiple catch, one way door allows several squirrels to enter the trap. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 19L x 3W x 3H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 3 x 3" or...

Weight: 1 lbs

Size: 19L x 3W x 3H

Wire: 1/2 x 1 - 14 gauge

$43⁷⁵

Select options

4" x 4" Pro Excluder Trap for Squirrels

CODE:E40D-SS

Model E40D-SS is our 4" x 4" Professional Series Excluder Trap. Our Pro Excluders feature an easy release rear door that opens to the side for easy transfer even when mounted; extra wings to create directional funnels when needed; and a toe jammer to prevent even the smartest trapped squirrels from exiting the trap. The multiple catch, one way door allows several squirrels to enter the trap. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 26L x 4W x 4H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 4" x 4" or...

Weight: 2 lbs

Size: 26L x 4W x 4H

Wire: 1/2 x 1 - 14 gauge

$45⁷⁵

Select options

5" x 5" Pro Excluder Trap for Squirrels

CODE:E50D-SS

Model E50D-SS is our 5" x 5" Professional Series Excluder Trap. Our Pro Excluders feature an easy release rear door that opens to the side for easy transfer even when mounted; extra wings to create directional funnels when needed; and a toe jammer to prevent even the smartest trapped squirrels from exiting the trap. The multiple catch, one way door allows several squirrels to enter the trap. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 26L x 5W x 5H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 5" x 5" or...

Weight: 2 lbs

Size: 26L x 5W x 5H

Wire: 1/2 x 1 - 14 gauge

$47⁷⁵

Select options

SC60 - 20x7x7" Soffit Cone

CODE:SC60

SC60 - Soffit cones allow you exclude or trap critters from den openings in soffits or other overhead surfaces. Soffit cones have 1" flaps on each side which allow them to be easily attached. Once the soffit cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. These cones can also be used on vertical walls over animal entry points or even spiked into the ground over animal den openings. This cone measures 20"x 7"x 7" and is used with 6"x 6" traps or excluders.

Weight: 2.5 lbs

Size: 20L x 7W x 7H

Wire: 1 x 1 - 14 gauge

$25⁹⁵

Select options

SC70 - 20x8x8" Soffit Cone

CODE:SC70

SC70 - Soffit cones allow you exclude or trap critters from den openings in soffits or other overhead surfaces. Soffit cones have 1" flaps on each side which allow them to be easily attached. Once the soffit cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. These cones can also be used on vertical walls over animal entry points or even spiked into the ground over animal den openings. This cone measures 20" x 8"x 8" and is used with 7" x 7" traps or excluders.

Weight: 4 lbs

Size: 20L x 8W x 8H

Wire: 1 x 1 - 14 gauge

$28²⁵

Select options

SC80 - 20x9x9" Soffit Cone

CODE:SC80

SC80 - Soffit cones allow you exclude or trap critters from den openings in soffits or other overhead surfaces. Soffit cones have 1" flaps on each side which allow them to be easily attached. Once the soffit cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. These cones can also be used on vertical walls over animal entry points or even spiked into the ground over animal den openings. This cone measures 20" x 9"x 9" and is used with 8" x 8" traps or excluders.

Weight: 4 lbs

Size: 20L x 9W x 9H

Wire: 1 x 1 - 14 gauge

$32⁵⁰

Select options

SC90 - 24x10x10" Soffit Cone

CODE:SC90

SC90 - Soffit cones allow you exclude or trap critters from den openings in soffits or overhead surfaces. Soffit cones have 1" flaps on each side which allow them to be easily attached. Once the soffit cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. These cones can also be used on vertical walls over animal entry points or even spiked into the ground over animal den openings. This cone measures 24" x 10"x 10" and is used with 9" x 9" traps or excluders.

Weight: 4 lbs

Size: 24L x 10W x 10H

Wire: 1 x 1 - 14 gauge

$34⁵⁰

Select options

SC120 - 26x13x13" Soffit Cone

CODE:SC120

SC120 - Soffit cones allow you exclude or trap critters from den openings in soffits or other overhead surfaces. Soffit cones have 1" flaps on each side which allow them to be easily attached. Once the soffit cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. These cones can also be used on vertical walls over animal entry points or even spiked into the ground over animal den openings. This cone measures 26"x 13"x 13" and is used with 10" x 12" or 12" x 12" traps.

Weight: 7 lbs

Size: 26L x 13W x 13H

Wire: 1 x 2 - 12 Gauge

$45⁰⁰

Select options

SC100 - 24x11x11" Soffit Cone

CODE:SC100

SC100 - Soffit cones allow you exclude or trap critters from den openings in soffits or other overhead surfaces. Soffit cones have 1" flaps on each side which allow them to be easily attached. Once the soffit cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. These cones can also be used on vertical walls over animal entry points or even spiked into the ground over animal den openings. This cone measures 24"x 11"x 11" and is used with 10"x 10" traps.

Weight: 4 lbs

Size: 24L x 11W x 11H

Wire: 1 x 1 - 14 gauge

$37⁵⁰

Select options

Eviction Equipment - One Way Doors

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Extras

My Account

Customer Service

Tomahawk Live Trap

Eviction Equipment - One Way Doors

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media