1925-2025 - Celebrating 100 Years

Marketplace Menu

Specialty Traps

Filters
  • Price
  • ‎$2
  • ‎$9875

$  â€“  $

406W
Model 406W is a pair of extension wings that can easily be added to our Model 406 or 406DD. The extension wings act as a large funnel system reaching out 42'' on each side of the trap to greatly increase the number of fish caught. These extension wings measure 42L x 15H" and are constructed of 1" x 1" wire mesh.
Weight: 6 lbs
Size: 42 x 15
Wire: 1x1 - 14 gauge
402.4
Model 402.4 is our medium sized fish live box made from 1 x 1 - 14 gauge mesh wire that is coated with a durable plastic and built to last a lifetime. This is the same material used to make lobster pots to withstand salt water. The top opening door features two locks to prevent critters from entering and stealing your fish. Perfect for pan fish, walleye, and similar sized fish. It is an excellent addition to any dock for holding fish during the day when you have not met your daily catch limit. Simply attach a rope or chain to the live box and toss it off the end of the dock to pull up later when you are ready to clean fish for the...
Weight: 7 lbs
Size: 24L x 15W x 15H
Wire: 1x1 - 14 Gauge Coated
424
Model 424 is our funnel style perch and minnow trap. It features two funnels, one on each end to funnel perch or bait fish into the trap. Included are 3 sets of cone adapters to adjust the cone opening for specific sized fish. The base opening of the cone measures 4" x 4" and the adapters can reduce the funnel cone to measure 3" x 3", 2" x 2" or 1" x 1". Simply zip-tie or hog ring the appropriate cone adapters into the funnels. This trap also features an easy release door to remove your catch and bait the trap. Frame and funnels are constructed from ½ x ½ – 16 gauge galvanized after weld mesh. This trap measures 30L x 15W x 15H".
Weight: 12 lbs
Size: 30L x 15W x 15H"
Wire: 1/2 x 1/2 - 16 gauge GAW
402.4C
Model 402.4C is our medium sized collapsible fish live box made from 1 x 1 - 14 gauge mesh wire that is coated with durable plastic and built to last a lifetime. This is the same material used to make lobster pots to withstand corrosive salt water. When deployed, it measures 24L x 15W x 15H and folds flat in seconds with no tools required to 24L x 15W x 2H. This is the perfect live box when space is at a premium because it folds to only 2" and takes very little storage space. It also has a top opening door with a lock to prevent critters from stealing your catch. Perfect for pan fish, walleye, and similar sized fish.
Weight: 7 lbs
Size: 24L x 15W x 15H
Wire: 1x1 - 14 Gauge Coated
402.5
Model 402.5 is a live box made from the same coated wire mesh as lobster pots used in salt water to resist corrosion. It is an excellent addition to any dock for holding fish during the day when you have not met your daily catch limit. Simply attach a rope or chain to the live box and toss it off the end of the dock to pull up later when you are ready to clean fish for the day. This live box measures 36L x 18W x 18H and is constucted of 1x1 coated wire mesh.
Weight: 11 lbs
Size: 36x18x18
Wire: 1x1 coated 14-gauge
425
Model 425 is our funnel style fish trap for catfish and rough fish. It features a 3 cone funnel system, release door, and bait compartment. The frame is constructed from 1 x 2 – 12 gauge mesh and the cones are 1 x 1 – 14 mesh. This is a durable fish trap build to last for years. It measures 52L x 19W x 19H.
Weight: 19 lbs
Size: 52L x 19W x 19H
Wire: 1 x 2 - 12ga frame with 1x1 - 14ga funnels
PT3624SWF
Large rigid pigeon trap with six trap doors, shade screen, food tray and water bowl. This trap measures 36L x 24W x 9H and features six one-way trap doors with door guards and doors located on all sides. Trap includes a 36x24" shade screen which covers the entire top to prevent birds from overheating in direct sunlight. It also includes a built in 5 x 5 x 2H" food tray and 1 quart water bowl to accommodate trapped birds for extended periods. There is an access door for the food tray and water bottle, and another access door for easy bird removal. This trap is designed to catch and hold up to 24 pigeons.
Weight: 9 lbs
Size: 36L x 24W x 9H
Wire: 1 x 2 - 14ga
402.5C
Model 402.5C is our large collapsible fish live box made from 1 x 1 - 14 gauge mesh wire that is coated with durable plastic and built to last a lifetime. This is the same material used to make lobster pots to withstand corrosive salt water. When deployed, it measures 36L x 18W x 18H and folds flat in seconds with no tools required to 36L x 18W x 2H. This is the perfect live box when space is at a premium because it folds to only 2" and takes very little storage space. It also has a top opening door with 2 locks to prevent critters from stealing your catch. Perfect for pan fish, walleye, northern pike, bass and similar sized fish.
Weight: 12 lbs
Size: 36L x 18W x 18H
Wire: 1x1 - 14 Gauge Coated
PT3624KDSWF
Large collapsible pigeon trap with six trap doors, shade screen, food tray and water bowl. This trap measures 36L x 24W x 9H when deployed and folds to nearly flat for storage. It can be set up in seconds with no tools required. It features six one-way trap doors with doors located on all sides. Trap includes a 36x24" shade screen which covers the entire top to prevent birds from overheating in direct sunlight. It also includes a 5 x 5 x 2H" food tray and 1 quart water bowl to accommodate trapped birds for extended periods. There is an access door for the food tray and water bottle, and another access door for easy bird removal. This trap...
Weight: 9 lbs
Size: 36L x 24W x 9H
Wire: 1 x 2 - 14ga
405
Model 405 is a double door crayfish trap that features two trap doors, one on each end. The trap doors act as funnels for the crayfish to enter and one end can also be unlatched to easily remove your catch. This trap measures 20L x 8W x 8H" and is constructed from 1/2 x 1" - 14 gauge wire mesh.
Weight: 3 lbs
Size: 20 x 8 x 8"
Wire: 1/2 x 1" - 14 gauge
405.5
Model 405.5 is a multiple catch trap for crayfish, crab, and shrimp. This trap is made from 1x1" galvanized wire mesh and features four, 3" wide cone doors that funnel animals into the trap. This trap also features a 4x4" bait box inside the trap made of ½" x ½" mesh to allow the bait to be seen and smelled but not accessible which allows more animals to enter the trap. One entire side of the trap can be opened to easily remove your catch. This trap measures 24L x 24W x 10H.
Weight: 13 lbs.
Size: 24x24x10
Wire: 1 x 1 - 14 gauge
405.6
Model 405.6 is our extra large crayfish, crab, and shrimp trap featuring three funnel style trap doors. This heavy duty trap measures 36"W x 36"L x 11"H and is constructed from 1 x 1" – 12 gauge galvanized wire mesh. It includes a 5 x 5" built in bait box constructed from ½ x ½" galvanized mesh. One entire side of the trap can be quickly unlatched and opened to allow for easy unloading of your catch.
Weight: 25 lbs
Size: 36L x 36W x 11H"
Wire: 1 x 1 - 12 gauge
403
Model 403 is a collapsible turtle trap that easily folds flat for saving storage space. This trap uses a traditional trip pan to close the trap door. Bait this trap with chopped raw fish in a mesh sack or bait box hanging near the back of the trap. Turtles will enter the trap to feed and step on the trip plate activating the door to shut. Placement of the trap should be partially submerged with the trap door facing deeper water and bait touching the water to ensure the scent from the raw fish enters the water attracting the turtle. When deployed this turtle trap measures 30L x 18W x 9H and is constructed from 1x2 - 12ga wire mesh. When...
Weight: 11 lbs
Size: 32x18x9
Wire: 1x2 12 gauge
403R
Model 403R is a rigid turtle trap for catching turtles up to 40 lbs. This trap uses a traditional trip pan to close the trap door. Bait this trap with chopped raw fish in a sack or bait box hanging near the back of the trap. Turtles will enter the trap to feed and step on the trip plate activating the door to shut. Placement should be partially submerged with the trap door facing deeper water and bait touching the water to ensure the scent from the raw fish enters the water attracting the turtle. This trap measures 32L x 18W x 9H and is constructed of 1x2 - 12ga wire mesh.
Weight: 11 lbs
Size: 32x18x9
Wire: 1x2 12-gauge
4436
Model 4436 is a ferret trap designed in cooperation with the USDA. This is a rigid live trap that measures 36"L x 4"W x 4" and also features a 6" tunnel insert attached at the front of the trap. Has a spring powered door triggered by a pressure plate. This trap is constructed from 1" x 1" - 12ga galvanized steel.
Weight: 4 lbs
Size: 36L x 4W x 4H
Wire: 1x1 - 12 Gauge
404

turtle trap, turtle traps, turtle, turtles

Weight: 19 lbs
Size: 40x24x11
Wire: 1x2 - 12 gauge
404R
Model 404R is a rigid turtle trap for catching turtles up to 100 lbs. It features an access door at the rear of the trap for easy baiting. This trap uses a traditional trip pan to close the trap door. Bait this trap with chopped raw fish in a sack or bait box hanging near the back of the trap. Turtles will enter the trap to feed and step on the trip plate activating the door to shut. Placement of the trap should be partially submerged with the trap door facing deeper water and bait touching the water to ensure the scent from the raw fish enters the water attracting the turtle.This trap measures 42L x 24W x 11H and is constructed of 1x2 -...
Weight: 19 lbs
Size: 42x24x11
Wire: 1x2 - 12 gauge
WCSTJSL
Snake lure is designed to attract snakes into a trap. Simply place 4-6 drops on a cotton ball in center of the trap. It can take 12 - 72 hours to attract a snake. It all depends on the snakes feeding cycle. Snakes do not usually feed on a daily basis. Comes in 4 oz. bottle.
$2450
+
463
Model 463 is a snake/reptile trap with a 2 pan system designed to catch large snakes or reptiles only. Snakes and reptiles have long bodies that are either dragged along the ground or very low to the ground. This enables them to press both pans at the same time and trigger the trap. Other animals such as mammals will walk over one pan at a time and not trigger the trap. This trap also features a removable rear door for easy animal release.
410
Model 410 is a multiple catch turtle trap that can catch and hold many turtles at one time. It has a unique swinging trap door system that allows turtles to enter and not leave. It also has a "bait door" near the back of the trap to allow you to quickly and easily bait the trap without reaching through the repeating trap door. It works especially well on snapping turtles. Bait this trap with chopped raw fish in a sack or bait box hanging near the back of the trap. Turtles will enter the trap to feed. Placement of the trap should be partially submerged with the trap door facing deeper water and bait touching the water to ensure the...
Weight: 19 lbs
Size: 42L x 24W x 12H
Wire: 1"x2" - 12 gauge
460
Model 460 is a small snake trap that functions as a funneling system to catch snakes for relocation. The funnel opening is a 1 ½" in diameter and can be adjusted tighter. The trap comes with a Powder Coated finish to add extra solar heat to the trap enticing snakes to enter. The trap features two 24" wings that can be extended to the sides for funneling snakes into the trap. There is also a removable back door for easy release that features a welded on sheet metal plate for added protection while removing the rear door lock.
Weight: 6 lbs
Size: 26 x 9 x 9
Wire: 1/2 x 1 - 14 gauge
409
Model 409 is a floating turtle trap designed to catch many turtles at a time. When turtles climb up on the ramps to sun themselves the gravity trap panels tip into the trap compartment and they fall into the trap. Made with aluminum ramps, 1" x 1" – 14 gauge coated mesh frame, and strategic ¼" steel reinforcing rods make this the strongest and most durable floating turtle trap available. The wire mesh is coated with the same material used on lobster pots in salt water. Along with turtles naturally entering the trap from sunning on the platforms you may also entice turtles to enter the trap by using chopped raw fish for bait enclosed in a...
Weight: 21 lbs
Size: 24L x 20W x 18H
Wire: 1x1 - 14 Gauge Coated
$28975
+
460XL
Model 460XL is a large snake trap that functions as a funneling system to catch large snakes for relocation. The funnel opening is 3" in diameter and can be adjusted tighter. The trap comes with a Powder Coated finish to add extra solar heat to the trap enticing snakes to enter. The trap features two 36" wings that can be extended to the sides for funneling snakes into the trap. There is also a removable back door for easy release that features a welded on sheet metal plate for added protection while removing the rear door lock.
Weight: 6 lbs
Size: 36 x 12 x 12
Wire: 1/2 x 1 - 14 gauge
465
Model 465 is our repeating plastic snake trap designed for catching small and medium size snakes up to 1-½" thick. The trap is made from durable polyethylene and will hold up against the elements for many years. It measures 17L x 12W x 12H.  Once a snake passes through the cone shaped trap door, escape is virtually impossible. The trap has a guillotine style release door to make releasing snakes or baiting the trap very easy. There are 8 quarter inch holes drilled into the sides of the trap for ventilation. The trap can be baited with our Strike-UM snake lure.
Weight: 7 Lbs.
Size: 17L x 12W x 12H
Wire: Polyethylene
DM001
The Collarum® is one of the best and most humane canine capture devices on the market. The Collarum® throws a secure, non-choking cable loop over a canine's head and around the neck making capture faster, easier and more effective than ever before.
$8295
+
DM002
The Collarum® is one of the best and most humane canine capture devices on the market. The Collarum® throws a secure, non-choking cable loop over a canine's head and around the neck making capture faster, easier and more effective than ever before.
$9695
+
DM003
The Collarum® is one of the best and most humane canine capture devices on the market. The Collarum® throws a secure, non-choking cable loop over a canine's head and around the neck making capture faster, easier and more effective than ever before.
$7695
+
DM004
The Collarum® is one of the best and most humane canine capture devices on the market. The Collarum® throws a secure, non-choking cable loop over a canine's head and around the neck making capture faster, easier and more effective than ever before. This package includes heavy duty spikes for securing the device and bait for attracting animals.
$13595
+
RC3-02C
Replacement Coyote Collarum cable for model DM01.
$895
+
RC5-01C
Replacement fox Collarum cable for model DM003.
$895
+
RC3-03C
Replacement relax-a-lock dog cable for coyote / dog Collarum base.
$1395
+
420
Model 420 is a repeating bullfrog trap designed to hold 20+ frogs at a time. It features two one way entry doors and a top access release door. It measures 24L x 24W x 8H and is constructed from 1x1 - 14ga galvanized wire mesh. The entry doors are made of clear acrylic bobs that allow easy entry but cannot be pushed out from the inside. Suspend a fishing spinner blade with fishing line in the center of the trap as a lure. Bullfrogs see the flash and are tempted to enter the trap.  This trap is not intended for smaller frogs which can easily escape the trap by slipping thru the mesh.
Weight: 8 lbs
Size: 24L x 24W x 8H
Wire: 1x1 - 14 Gauge
520
Model 520 Goshawk, hawk trap. The hawk trap works by placing bait in the lower section of the trap and setting the perch to hold open the trap doors. When a hawk lands on the perch to investigate the perch gives way under the weight of the bird causing the trap doors to close above them. When deployed the trap measures 36L x 36W x 38H. The trap ships disassembled for lower shipping cost. An instructional assembly video is available on our instructions page.
Weight: 88 lbs
Size: 36L x 36W x 38H"
Wire: 1 x 2" - 12 gauge and 1x1" Angle Iron Frame
$55000
+
525
Model 525 Goshawk, bird of prey trap. - We must receive proof of a FEDERAL MIGRATORY BIRD DEPREDATION PERMIT before we can ship this trap. This trap is exactly the same as our model 520 except that it features nylon netting trap doors rather than wire mesh. This makes it less likely trapped raptors will be injured by the trap. The hawk trap works by placing bait in the lower section of the trap and setting the perch to hold open the trap doors. When a hawk lands on the perch to investigate, the perch gives way under the weight of the bird causing the trap doors to close above them. When deployed the trap measures 36L x 36W x 38H. The trap...
Weight: 85 lbs
Size: 36L x 36W x 38H"
Wire: 1 x 2" - 12 gauge and 1x1" Angle Iron Frame
$57500
+
102CS
Model 102CS is a rigid multiple catch colony trap for muskrats. This trap measures 28L x 5W x 5H and is made from 1 x 1 - 14 gauge galvanized wire mesh.
Weight: 2 lbs
Size: 28L x 5W x 5H
Wire: 1 x 1 - 14 gauge
102CL
Model 102CL is a rigid colony trap for muskrats. This trap measures 36 x 5 x 5" and is made from 1 x 1 - 14 gauge galvanized wire mesh.
Weight: 2 lbs
Size: 36L x 5W x 5H
Wire: 1 x 1 - 14 gauge
103CS
103CS - 28x6x6 rigid colony trap for muskrats. This trap measures 28 x 6 x 6" and is made from 1 x 1 - 14 gauge galvanized wire mesh.
Weight: 3 lbs
Size: 28L x 6W x 6H
Wire: 1 x 1 - 14 gauge
103CL
Model 103CL is a large rigid multiple catch colony trap for muskrats. It measures 36L x 6W x 6H" and is made from 1 x 1 - 14 gauge galvanized wire mesh.
Weight: 4 Lbs
Size: 36L x 6W x 6H
Wire: 1 x 1 - 14 gauge
104CS
Model 104CS is a colony trap for muskrats. This trap measures 28 x 7 x 7 and is made from 1 x 1 - 14 gauge galvanized wire mesh.
Weight: 4 Lbs
Size: 28L x 7W x 7H
Wire: 1 x 1 - 14 gauge
104CL
Model 104CL is a colony trap for muskrats. This trap measures 36 x 7 x 7" and is made from 1 x 1 - 14 gauge galvanized wire mesh.
Weight: 4 Lbs
Size: 36L x 7W x 7H
Wire: 1 x 1 - 14 gauge
105C
Model 105C is a rigid colony trap for muskrats. This trap measures 36 x 8 x 8" and is made from 1 x 1 - 14 gauge galvanized wire mesh.
Weight: 5 lbs
Size: 36L x 8W x 8H
Wire: 1 x 1 - 14 gauge
106C
Model 106C is a rigid colony trap for muskrats. This trap measures 36 x 9 x 9" and is made from 1 x 1 - 14 gauge galvanized wire mesh.
Weight: 6 lbs
Size: 36L x 9W x 9H
Wire: 1 x 1 - 14 gauge
107C
Model 107C is a rigid colony trap for muskrats and similar size animals. This trap measures 36 x 10 x 10 and is made from 1 x 1 - 14 gauge galvanized wire mesh.
Weight: 7 lbs
Size: 36L x 10W x 10H
Wire: 1 x 1 - 14 gauge
202CS
Model 202CS is a collapsible multiple catch colony trap for muskrats. This trap measures 28L x 5W x 5H" and is constructed of 1x1" - 14 gauge wire mesh.
Weight: 3 lbs
Size: 28L x 5W x 5H
Wire: 1 x 1 - 14 gauge
202CL
Model 202CL is a collapsible colony trap for muskrats. This trap measures 36 x 5 x 5" and is constructed of 1x1" - 14 gauge wire mesh. These collapsible colony traps feature two swing down support bars that give the trap extra durability and can also be used to push the trap down into the mud.
Weight: 3 lbs
Size: 36L x 5W x 5H
Wire: 1 x 1 - 14 gauge
203CS
Model 203CS is a collapsible colony trap for muskrats and similar size animals. This trap measures 28 x 6 x 6" and is constructed of 1x1" - 14 gauge wire mesh. These collapsible colony traps feature two swing down support bars that give the trap extra durability when set up and also hold the trap down in the mud.
Weight: 4 Lbs
Size: 28L x 6W x 6H
Wire: 1 x 1 - 14 gauge
203CL
Model 203CL is a collapsible colony trap for muskrats. This trap measures 36 x 6 x 6" and is constructed of 1x1" - 14 gauge wire mesh. These collapsible colony traps feature two swing down support bars that give the trap extra durability when set up and also hold the trap down in the mud.
Weight: 4 lbs
Size: 36L x 6W x 6H
Wire: 1 x 1 - 14 gauge wire mesh
204CS
Model 204CS is a collapsible colony trap for muskrats. This trap measures 28 x 7 x 7" and is constructed of 1x1" - 14 gauge wire mesh. These collapsible colony traps feature two swing down support bars that give the trap extra durability when set up and also hold the trap down in the mud.
Weight: 5 lbs
Size: 28L x 7W x 7H
Wire: 1 x 1 - 14 gauge
204CL
Model 204CL is a collapsible colony trap for muskrats. This trap measuers 36 x 7 x 7" and is constructed of 1x1" - 14 gauge wire mesh. These collapsible colony traps feature two swing down support bars that give the trap extra durability when set up and also hold the trap down in the mud.
Weight: 5 lbs
Size: 36L x 7W x 7H
Wire: 1 x 1 - 14 gauge
205C
Model 205C is a collapsible colony trap for muskrats. This trap measures 36 x 8 x 8" and is constructed of 1x1" - 14 gauge wire mesh. These collapsible colony traps feature two swing down support bars that give the trap extra durability when set up and also hold the trap down in the mud.
Weight: 6 lbs
Size: 36L x 8W x 8H
Wire: 1 x 1 - 14 gauge