Traps :: Specialty Traps :: Multiple Catch / Repeating Traps

102CS - 28x5x5 Rigid Muskrat Colony Trap

CODE:102CS

Model 102CS is a rigid multiple catch colony trap for muskrats. This trap measures 28L x 5W x 5H and is made from 1 x 1 - 14 gauge galvanized wire mesh.

Weight: 2 lbs

Size: 28L x 5W x 5H

Wire: 1 x 1 - 14 gauge

$22⁷⁵

Select options

103CL - 36x6x6 Rigid Muskrat Colony Trap

CODE:103CL

Model 103CL is a large rigid multiple catch colony trap for muskrats. It measures 36L x 6W x 6H" and is made from 1 x 1 - 14 gauge galvanized wire mesh.

Weight: 4 Lbs

Size: 36L x 6W x 6H

Wire: 1 x 1 - 14 gauge

$30⁷⁵

Select options

102CL - 36x5x5 Rigid Muskrat Colony Trap

CODE:102CL

Model 102CL is a rigid colony trap for muskrats. This trap measures 36 x 5 x 5" and is made from 1 x 1 - 14 gauge galvanized wire mesh.

Weight: 2 lbs

Size: 36L x 5W x 5H

Wire: 1 x 1 - 14 gauge

$26²⁵

Select options

103CS - 28x6x6 Rigid Muskrat Colony Trap

CODE:103CS

103CS - 28x6x6 rigid colony trap for muskrats. This trap measures 28 x 6 x 6" and is made from 1 x 1 - 14 gauge galvanized wire mesh.

Weight: 3 lbs

Size: 28L x 6W x 6H

Wire: 1 x 1 - 14 gauge

$28⁵⁰

Select options

104CS - 28x7x7 Rigid Muskrat Colony Trap

CODE:104CS

Model 104CS is a colony trap for muskrats. This trap measures 28 x 7 x 7 and is made from 1 x 1 - 14 gauge galvanized wire mesh.

Weight: 4 Lbs

Size: 28L x 7W x 7H

Wire: 1 x 1 - 14 gauge

$33⁰⁰

Select options

104CL - 36x7x7 Rigid Muskrat Colony Trap

CODE:104CL

Model 104CL is a colony trap for muskrats. This trap measures 36 x 7 x 7" and is made from 1 x 1 - 14 gauge galvanized wire mesh.

Weight: 4 Lbs

Size: 36L x 7W x 7H

Wire: 1 x 1 - 14 gauge

$35²⁵

Select options

105C - 36x8x8 Rigid Muskrat Colony Trap

CODE:105C

Model 105C is a rigid colony trap for muskrats. This trap measures 36 x 8 x 8" and is made from 1 x 1 - 14 gauge galvanized wire mesh.

Weight: 5 lbs

Size: 36L x 8W x 8H

Wire: 1 x 1 - 14 gauge

$37⁵⁰

Select options

106C - 36x9x9 Rigid Muskrat Colony Trap

CODE:106C

Model 106C is a rigid colony trap for muskrats. This trap measures 36 x 9 x 9" and is made from 1 x 1 - 14 gauge galvanized wire mesh.

Weight: 6 lbs

Size: 36L x 9W x 9H

Wire: 1 x 1 - 14 gauge

$42⁰⁰

Select options

107C - 36x10x10 Rigid Muskrat Colony Trap

CODE:107C

Model 107C is a rigid colony trap for muskrats and similar size animals. This trap measures 36 x 10 x 10 and is made from 1 x 1 - 14 gauge galvanized wire mesh.

Weight: 7 lbs

Size: 36L x 10W x 10H

Wire: 1 x 1 - 14 gauge

$47⁷⁵

Select options

M35 - 3.5 x 3.5" Multiple Catch Rodent Trap

CODE:M35

Model M35 is a multiple catch trap that is great for small rodents such as chipmunks and small squirrels and can hold four or more at a time. This trap measures 26 x 3.5 x 3.5" and is constructed of 1/2 x 1" - 14 gauge wire mesh.

Weight: 2 lbs

Size: 26 x 3½ x 3½

Wire: ½ x 1 - 14 gauge

$32⁵⁰

Select options

M40 - 4 x 4" Multiple Catch Rodent Trap With Two Trap Doors

CODE:M40

Model M40 is a multiple catch trap that is great for small rodents such as chipmunks and small squirrels and can hold four or more at a time. This trap measures 30 x 4 x 4" and is constructed of 1/2 x 1" - 14 gauge wire mesh.

Weight: 2 lbs

Size: 30 x 4 x 4

Wire: ½ x 1 - 16 gauge

$35⁷⁵

Select options

M30H - Multiple Catch Trap With 3" Doors And Large Holding Area

CODE:M30H

Model M30H is a double door repeating catch trap. It is designed to capture upwards of 10 small rodent sized animals per setting. This includes animals such as small squirrels, chipmunks, gophers, and rats. The unique push through one way door makes it easy for animals to enter and impossible for them to escape. This trap features two spring powered 3" wide double doors and a 5x5 flip open release door. It weighs 5 lbs and measures 24L x 24W x 4H". This trap is made from ½ x 1 – 14 gauge galvanized steel wire and is strong, reliable, and requires no maintenance

Weight: 6 lbs

Size: 24L x 24W x 4H

Wire: ½ x 1 - 14 Gauge

$71⁹⁵

Select options

M50 - 5 x 5" Multiple Catch Rodent Trap with Two Trap Doors

CODE:M50

Model M50 is a multiple catch trap that is great for small rodents such as chipmunks and small squirrels and can hold four or more at a time. This trap measures 36 x 5 x 5" and is constructed of 1/2 x 1" - 14 gauge wire mesh.

Weight: 3 lbs

Size: 36x5x5

Wire: ½ x 1 - 16 gauge

$38⁷⁵

Select options

M35H - Multiple Catch Trap With 3.5" Doors And Large Holding Area

CODE:M35H

Model M35H is a flush mount double door repeating catch trap. It is designed to capture upwards of 10 small rodent sized animals per setting. This includes animals such as small squirrels, chipmunks, gophers, and rats. The unique push through one way door makes it easy for animals to enter and impossible for them to escape. This trap features two spring powered 3 ½" wide double doors and a 5x5 flip open release door. It weighs 5 lbs and measures 26L x 8W x 4H". This trap is made from ½ x 1 – 14 gauge galvanized steel wire and is strong, reliable, and requires no maintenance.

Weight: 4 lbs

Size: 26 x 8 x 4

Wire: ½ x 1 - 14 gauge

$71⁹⁵

Select options

M40H - Multiple Catch Trap with 4" Door and Large Holding Area

CODE:M40H

Model M40H is a flush mount double door repeating catch trap. It is designed to capture upwards of 10 rodent sized animals per setting. This includes animals such as fox squirrels, grey squirrels, and rats. The one way door makes it easy for animals to enter but they are not able to push the doors open from the inside. This trap features two 4" wide spring powered double doors and a 5x5 flip open release door. It weighs 5 lbs and measures 24L x 24W x 4H". This trap is made from 1 x 1 – 14 gauge galvanized steel wire and is strong, reliable, and requires no maintenance.

Weight: 6 lbs

Size: 24L x 24W x 4H

Wire: 1x1 - 14 Gauge

$71⁹⁵

Select options

M42H - California Ground Squirrel Trap with 4" Door and 1'x2" Wire Mesh

CODE:M42H

Model M42H is a flush mount double door repeating catch trap designed for California ground squirrels. The larger mesh spacing allows smaller, protected species to pass through the trap mesh while preventing the larger California ground squirrel from escaping. It is designed to capture upwards of 10 animals per setting. The one way door makes it easy for animals to enter but they are not able to push the doors open from the inside. This trap features two 4" wide spring powered double doors and a 5x5 flip open release door. It weighs 4 lbs and measures 24L x 24W x 4H". This trap is made from 1 x 2 – 14 gauge galvanized steel.

Weight: 4 lbs

Size: 24L x 24W x 4H

Wire: 1x2 - 14 Gauge

$71⁹⁵

Select options

G100 - 3"x3" Ground Hugger Multiple Catch Trap

CODE:G100

Model G100 is a positive set multiple catch repeating trap for chipmunks, gophers and ground squirrels. It features a bottom opening that is designed to be set directly over an animal burrow entry point. It is is equipped with two U-Spikes that push into the ground securing it over an animals burrow. This trap measures 14L x 3W x 3H and is constructed of 1/2" x 1" - 14 gauge wire mesh. It is designed to fit over 3 x 3" or smaller ground holes. If the entry point is wider use rocks or other hard materials around the trap to fill in any gaps and force the animal to enter the trap when exiting the den.

Weight: 2 lbs

Size: 14L x 3W x 3H

Wire: 1/2 x 1 - 14 gauge

$40⁷⁵

Select options

Pest-Blok Repeating Skunk Trap with XL Holding Area

CODE:PBST100

Model PBST100 is a multiple catch skunk trap with large holding area designed to catch the whole surfeit (group of skunks). This trap was designed by Wayne Langman and has proven itself to be an excellent trap for groups of skunks with over 30 years of in the field use by professional wildlife control operators. It is equipped with two flush mount, colony style, trap doors that allow skunks to walk in but cannot be pushed open from the inside. It is an ideal trap for setting against a den entry under sheds, decks and other structures. This trap also features a uv protected plastic cover over the holding area to keep trapped animals...

Weight: 7.5 lbs

Size: 24 x 18 x 6

Wire: 1/2 x 1 - 14 gauge

$89⁹⁵

Select options

G110 - 4x4x24" Ground Hugger Multiple Catch Trap

CODE:G110

Model G110 is a positive set multiple catch repeating trap for chipmunks, gophers and ground squirrels. It features a bottom opening that is designed to be set directly over an animal burrow entry point. It is is equipped with two U-Spikes that push into the ground securing it over an animals burrow. This trap measures 24L x 4W x 4H" and is constructed of 1/2" x 1" - 14 gauge wire mesh. It is designed to fit over 4 x 4" and smaller ground holes. If the entry point is wider use rocks or other hard materials around the trap to fill in any gaps and force the animal to enter the trap when exiting the den.

Weight: 3 lbs

Size: 24L x 4W x 4H

Wire: 1/2 x 1 - 14 gauge

$47⁵⁰

Select options

S50 - 5 x 5 Repeating Trap with Pan Setting Option

CODE:S50

Model S50 is a flush mount trap with a repeating trap door. This is an excellent trap for squirrels, chipmunks and similar size animals. Set the trap with door open for the first capture. Then, more animals may enter the trap by pushing in on the repeating trap door. This trap measures 24L x 5W x 5H and is constructed of 1/2" x 1 wire mesh.

Weight: 2 lbs

Size: 25L x 5W x 5H

Wire: 1/2 x 1 - 16 gauge

$45⁰⁰

Select options

S70 - 7 x 7 Flush Mount Repeating Trap with Pan Setting Option

CODE:S70

Model S70 is a flush mount trap with a repeating trap door. Set the trap with trap door open for the first capture. Then more animals may enter the trap by pushing in on the repeating trap door. It is an excellent trap for skunks that have burrowed under decks and outbuildings. This trap measures 30L x 7W x 7H and is constructed with 1x1 wire mesh.

Weight: 4 lbs

Size: 30L x 7W x 7H

Wire: 1 x 1 - 14 gauge

$56²⁵

Select options

S90 - 9 x 9 Repeating Trap with Pan Setting Option

CODE:S90

Model S90 is a flush mount trap with a repeating trap door. This is an excellent trap for rabbits. Set the trap with trap door open for the first capture. Then more animals may enter the trap by pushing in on the repeating trap door. These are flush mount traps meaning the door does not extend past the trap when set. This allows for flush placement against entry points on structures or dens.This trap measures 32L x 9W x 9H and is constructed with 1x1 wire mesh.

Weight: 5 lbs

Size: 32L x 9W x 9H

Wire: 1 x 1 - 14 gauge

$67⁷⁵

Select options

SP30 - Squirrel Pack Small - With One Trap Door and Easy Release Door

CODE:SP30

Let the critters remove themselves with the SP30 Squirrel Pack System. Perfect for smaller rodents such as flying squirrels and red squirrels. It is extremely simple to use and very effective. SP30 consists of one E30 excluder and two SPT30 repeating traps. The repeating traps have one trap door and and an easy release rear door. Attach E30 excluder over the animals den opening by tacking up the mounting wings with screws or heavy duty staples. Slide one of the SPT30 repeating traps over the E30 excluder and hook into place. As critters exit, the excluder will direct them into the repeating trap. To remove captured animals from the...

Weight: 4 lbs

Size: Consists of 1-E30 and 2-SPT30's

Wire: ½ x 1 - 14 gauge

$86¹⁸

Select options

SP40 - Squirrel Pack Medium - With One Trap Door and Easy Release Door

CODE:SP40

Let the critters remove themselves with the SP40 Squirrel Pack System. Perfect for red squirrels, grey squirrels, and similar size animals. It is extremely simple to use and very effective. SP40 consists of one E40 excluder and two SPT40 repeating traps. The repeating traps have one trap door and and an easy release rear door. Attach E40 over the animals den opening with the mounting wings. Slide one of the SPT40 repeating traps over the E40 excluder and hook into place. As critters exit, the excluder will direct them into the repeating trap. To remove captured animals from the property, simply unhook the SPT40 repeating trap and replace...

Weight: 5 lbs

Size: Consists of 1-E40 and 2-SPT40's

Wire: ½ x 1 - 14 gauge

$97⁶³

Select options

SP50 - Squirrel Pack Large - With One Trap Door and Easy Release Door

CODE:SP50

Let the critters remove themselves with the SP50 Squirrel Pack System. Perfect for grey and fox squirrel size animals. It is extremely simple to use and very effective. SP50 consists of one E50 excluder and two SPT50 repeating traps. The repeating traps have one trap door and and an easy release rear door. Attach E50 over the animals den opening with the mounting wings. Slide one of the SPT50 repeating traps over the E50 excluder and hook into place. As critters exit, the excluder will direct them into the repeating trap. To remove captured animals from the property, simply unhook the SPT50 repeating trap and replace it with the other...

Weight: 6 lbs

Size: Consists of 1-E50 and 2-SPT50's

Wire: 1/2 x 1 - 14 gauge

$108⁹⁰

Select options

SP35 - Squirrel Pack Small - With Two Trap Doors

CODE:SP35

Let the critters remove themselves with this system. SP35 is perfect for smaller critters such as flying squirrels and red squirrels. It's extremely simple to use and very effective. SP35 consists of one E30 excluder and two SPT35 repeating traps (with two trap doors). Attach the E30 excluder over the animals den opening with the mounting wings. Slide one of the SPT35 repeating traps over the E30 and hook into place. As critters exit, the excluder will direct them into the repeating trap. SPT35 repeating traps have trap doors at each end to allow you to caputre animals both leaving and entering the den. To remove trapped animals,...

Weight: 4 lbs

Size: Consists of 1-E30 and 2-SPT35's

Wire: 1/2 x 1 - 14 gauge

$86¹⁸

Select options

SP45 - Squirrel Pack Medium - With Two Trap Doors

CODE:SP45

Let the critters remove themselves with this system. SP45 is perfect for red and grey squirrels and similar sized rodents. It's extremely simple to use and very effective. SP45 consists of one E40 excluder and two SPT45 repeating traps (with two trap doors). Attach the E40 excluder over the animals den opening with the mounting wings. Slide one of the SPT45 repeating traps over the E40 and hook into place. As critters exit, the excluder will direct them into the repeating trap. SPT45 repeating traps have trap doors at each end to allow you to caputre animals both leaving and entering the den. To remove trapped animals, unhook the SPT45...

Weight: 5 lbs

Size: Consists of 1-E40 and 2-SPT45's

Wire: 1/2 x 1 - 14 gauge

$97⁶³

Select options

SP55 - Squirrel Pack Large - With Two Trap Doors

CODE:SP55

Let the critters remove themselves with this system. SP55 is perfect for fox and grey squirrels and similar sized rodents. It's extremely simple to use and very effective. SP55 consists of one E50 excluder and two SPT55 repeating traps (with two trap doors). Attach the E50 excluder over the animals den opening with the mounting wings. Slide one of the SPT55 repeating traps over the E50 and hook into place. As critters exit, the excluder will direct them into the repeating trap. SPT55 repeating traps have trap doors at each end to allow you to caputre animals both leaving and entering the den. To remove trapped animals, unhook the SPT55...

Weight: 6 lbs

Size: Consists of 1-E50 and 2-SPT55's

Wire: 1/2 x 1 - 14 gauge

$108⁹⁰

Select options

DSP30 - 3x3" Deluxe Squirrel Pack with One Trap Door and Easy Release Door

CODE:DSP30

DSP30 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E30, one soffit cone model SC30, one inside corner cone model CC30, and two repeating traps with one trap door and easy release door model SPT30. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP30 is made to fit over 3" x 3" wide and smaller openings.

$136⁸⁰

Select options

DSP40 - 4x4" Deluxe Squirrel Pack with One Trap Door and Easy Release Door

CODE:DSP40

DSP40 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E40, one soffit cone model SC40, one inside corner cone model CC40, and two repeating traps with one trap door and easy realease door model SPT40. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP40 is made to fit over 4" x 4" wide or smaller openings.

$150²⁸

Select options

DSP50 - 5x5" Deluxe Squirrel Pack with One Trap Door and Easy Release Door

CODE:DSP50

DSP50 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E50, one soffit cone model SC50, one inside corner cone model CC50, and two repeating traps with one trap door and easy release door model SPT50. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP50 is made to fit over 5" x 5" wide or smaller openings.

$164⁷⁰

Select options

DSP35 - 3x3" Deluxe Squirrel Pack with Two Trap Doors

CODE:DSP35

DSP35 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E30, one soffit cone model SC30, one inside corner cone model CC30, and two repeating traps with two trap doors model SPT35. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP35 is made to fit over 3" x 3" wide or smaller openings.

$136⁸⁰

Select options

DSP45 - 4x4" Deluxe Squirrel Pack with Two Trap Doors

CODE:DSP45

DSP45 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E40, one soffit cone model SC40, one inside corner cone model CC40, and two repeating traps with two trap doors model SPT45. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP45 is made to fit 4" x 4" wide or smaller openings.

$150²⁸

Select options

SPT35 - Repeating Trap for SP35 Squirrel Pack

CODE:SPT35

Model SPT35 Repeating Trap is used with an E30 - 3" x 3" excluder to create an SP35 Squirrel Pack. SPT35 repeating traps slide over excluders / one way doors and have trap doors at each end to allow you to capture animals both leaving and entering the den. One trap door is recessed so that the trap can easily be attached over the excluder / one way door. This trap measures 26L x 3.5W x 3.5H" and is constructed of 1/2" x 1" - 14 gauge wire mesh.

Weight: 2 lbs

Size: 26" x 3.5" x 3.5"

Wire: 0.5" x 1" - 14 gauge

$34⁰⁰

Select options

DSP55 - 5x5" Deluxe Squirrel Pack with Two Trap Doors

CODE:DSP55

DSP55 - The Tomahawk Deluxe Multi-Catch Squirrel Pack consists of one excluder model E50, one soffit cone model SC50, one inside corner cone model CC50, and two repeating traps with two trap doors model SPT55. This versatile multiple catch system allows you to trap or exclude the entire infestation from den openings located virtually anywhere, including vertical surfaces, inside corners, or overhanging structures. Make short work of any squirrel job with this incredible system. DSP55 is made to fit over 5" x 5" wide or smaller openings.

$164⁷⁰

Select options

SPT45 - Repeating Trap for SP45 Squirrel Pack

CODE:SPT45

Model SPT45 Repeating Trap is used with an E40 - 4" x 4" excluder to create an SP45 Squirrel Pack. SPT45 repeating traps slide over excluders / one way doors and have trap doors at each end to allow you to capture animals both leaving and entering the den. One trap door is recessed so that the trap can easily be attached over the excluder / one way door. This trap measures 30L x 4.5W x 4.5H" and is constructed of 1/2" x 1" - 14 gauge wire mesh.

Weight: 3 lbs

Size: 30 x 4.5 x 4.5

Wire: ½ x 1 - 14 gauge

$39⁷⁵

Select options

SPT55 - Repeating Trap for SP55 Squirrel Pack

CODE:SPT55

Model SPT55 Repeating Trap is used with an E50 - 5" x 5" excluder to create an SP55 Squirrel Pack. SPT55 repeating traps slide over excluders / one way doors and have trap doors at each end to allow you to capture animals both leaving and entering the den. One trap door is recessed so that the trap can easily be attached over the excluder / one way door. This trap measures 36L x 5.5W x 5.5H" and is constructed of 1/2" x 1" - 14 gauge wire mesh.

Weight: 4 lbs

Size: 36L x 5.5W x 5.5H

Wire: 1/2 x 1 - 14 gauge

$45⁵⁰

Select options

SPT30 - Repeating Trap for SP30 Squirrel Pack

CODE:SPT30

SPT30 Repeating Trap is used with a 3" x 3" - model E30 excluder to create an SP30 Squirrel Pack. These repeating traps slide over excluders / one way doors and have one recessed trap door in front and an easy release rear door on the back. This trap measures 26L x 3.5W x 3.5H" and is constructed of 1/2 x 1" - 14ga wire mesh.

Weight: 2 Lbs

Size: 26L x 3.5W x 3.5H

Wire: 0.5" x 1" - 14 gauge

$34⁰⁰

Select options

SPT40 - Repeating Trap for SP40 Squirrel Pack

CODE:SPT40

SPT40 Repeating Trap is used with an E40 - 4" x 4" excluder to create an SP40 Squirrel Pack. These repeating traps slide over excluders / one way doors and have one recessed trap door in front and an easy release rear door on the back. This trap measures 30L x 4W x 4H" and is constructed of 1/2 x 1" - 14ga wire mesh.

Weight: 3

Size: 30L x 4.5W x 4.5H

Wire: 0.5 x 1 - 14 gauge

$39⁷⁵

Select options

SPT50 - Repeating Trap for SP50 Squirrel Pack

CODE:SPT50

SPT50 Repeating Trap is used with an E50 - 5" x 5" excluder to create an SP50 Squirrel Pack. These repeating traps slide over excluders / one way doors and have one recessed trap door in front and an easy release rear door on the back. This trap measures 36L x 5.5W x 5.5H" and is constructed of 1/2" x 1" - 14 gauge wire mesh.

Weight: 4 lbs

Size: 36L x 5.5W x 5.5H

Wire: 0.5 x 1 - 14 gauge

$45⁵⁰

Select options

Mouse Tip Trap

CODE:109006

Model 109006 is a very simple and easy to use live catch mouse trap. Simply bait the trap and leave the door open. When a mouse enters the trap to eat the bait the trap tips backwards and the door shuts.

$2⁵⁰

Quantity:

+ −

Add to Cart

101026 - Ketch-All Repeating Mouse Trap With Clear Lid

CODE:101026

Model 101026 is a multiple catch mouse trap that is safe to use anywhere. This trap catches multiple mice without resetting No chemical baits or poisons. Just wind up the trap and set it next to the wall. After 10-12 catches, wind the trap again and its ready to use again. The clear window allows you to see how many mice you have caught.

Weight: 2.5 lbs

Size: 9L x 7W x 5.5H

Wire: Sheet Metal

$19⁹⁹

Quantity:

+ −

Add to Cart

E30D - 3"x3" Excluder with Rear Door for Chipmunks, Flying Squirrels, Small Rodents

CODE:E30D

Model E30D is an excluder trap with an easy release rear door for small rodents and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 19L x 3W x 3H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 3 x 3" or smaller openings.

Weight: 1 lbs

Size: 19L x 3W x 3H

Wire: 1/2 x 1 - 14 gauge

$41⁵⁰

Select options

3" x 3" Pro Excluder Trap for Squirrels

CODE:E30D-SS

Model E30D-SS is our 3" x 3" Professional Series Excluder Trap. Our Pro Excluders feature an easy release rear door that opens to the side for easy transfer even when mounted; extra wings to create directional funnels when needed; and a toe jammer to prevent even the smartest trapped squirrels from exiting the trap. The multiple catch, one way door allows several squirrels to enter the trap. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 19L x 3W x 3H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 3 x 3" or...

Weight: 1 lbs

Size: 19L x 3W x 3H

Wire: 1/2 x 1 - 14 gauge

$43⁷⁵

Select options

4" x 4" Pro Excluder Trap for Squirrels

CODE:E40D-SS

Model E40D-SS is our 4" x 4" Professional Series Excluder Trap. Our Pro Excluders feature an easy release rear door that opens to the side for easy transfer even when mounted; extra wings to create directional funnels when needed; and a toe jammer to prevent even the smartest trapped squirrels from exiting the trap. The multiple catch, one way door allows several squirrels to enter the trap. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 26L x 4W x 4H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 4" x 4" or...

Weight: 2 lbs

Size: 26L x 4W x 4H

Wire: 1/2 x 1 - 14 gauge

$45⁷⁵

Select options

5" x 5" Pro Excluder Trap for Squirrels

CODE:E50D-SS

Model E50D-SS is our 5" x 5" Professional Series Excluder Trap. Our Pro Excluders feature an easy release rear door that opens to the side for easy transfer even when mounted; extra wings to create directional funnels when needed; and a toe jammer to prevent even the smartest trapped squirrels from exiting the trap. The multiple catch, one way door allows several squirrels to enter the trap. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 26L x 5W x 5H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 5" x 5" or...

Weight: 2 lbs

Size: 26L x 5W x 5H

Wire: 1/2 x 1 - 14 gauge

$47⁷⁵

Select options

E40D - 4"x4" Excluder With Rear Door for Chipmunks, Squirrels

CODE:E40D

Model E40D is an excluder trap with an easy release door for chipmunks, squirrels and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 26L x 4W x 4H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 4 x 4" or smaller openings.

Weight: 2 lbs

Size: 26L x 4W x 4H

Wire: 1/2 x 1 - 14 gauge

$43⁵⁰

Select options

202CS - 28x5x5 Collapsible Muskrat Colony Trap

CODE:202CS

Model 202CS is a collapsible multiple catch colony trap for muskrats. This trap measures 28L x 5W x 5H" and is constructed of 1x1" - 14 gauge wire mesh.

Weight: 3 lbs

Size: 28L x 5W x 5H

Wire: 1 x 1 - 14 gauge

$30⁰⁰

Select options

E50D - 5"x5" Excluder with Rear Door for Squirrels, Rats

CODE:E50D

Model E50D is an excluder trap with an easy release door for rats, squirrels and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 26L x 5W x 5H" and is constructed of heavy duty 1/2 x 1" - 14 gauge wire mesh. It is designed to fit over 5 x 5" or smaller openings.

Weight: 3 lbs

Size: 26L x 5W x 5H

Wire: 1/2 x 1 - 14 gauge

$45²⁵

Select options

E60D - 6"x6" Excluder with Rear Door for Skunks, Cats, Rabbits, Opossums

CODE:E60D

Model E60D is an excluder trap with an easy release door for cats, skunks and similar size animals. Tomahawk excluders are designed to let animals remove themselves from unwanted areas. Excluders have mounting wings which allow them to be attached directly over the animals den opening. The one way door lets animals exit and prevents them from returning. The rear door allows you to trap the animal or simply remove the rear door to use it as a true excluder. This excluder trap measures 26L x 6W x 6H" and is constructed of heavy duty 1 x 1" - 14 gauge wire mesh. It is designed to fit over 6 x 6" or smaller openings.

Weight: 3 lbs

Size: 26L x 6W x 6H

Wire: 1 x 1 - 14 gauge

$54⁰⁰

Select options

Multiple Catch / Repeating Traps

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Extras

My Account

Customer Service

Tomahawk Live Trap

Multiple Catch / Repeating Traps

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media