Traps :: Specialty Traps

CODE:105.2

Model 105.2 is our Original Series enclosed rigid trap with one trap door designed for skunks. This trap is covered with sheet metal to protect against spray. It weighs 6 pounds and measures 24L x 7W x 7H. This trap is constructed from 1" x 1" - 14 gauge galvanized wire mesh and covered with 24 gauge sheet metal.

Weight: 5.95 lbs

Size: 24L x 7W x 7H

Wire: 1" x 1" - 14 gauge mesh with 24 gauge sheet metal covering

$79⁹⁵

Select options

MP100 - 8x8 Multi-Purpose Pro Trap for Skunks, Prairie Dogs and Similar Size Animals with Easy Release Rear Access Door

CODE:MP100

MP100 is our Professional Series multi-purpose positive set trap designed for skunks, opossums, prairie dogs and similar sized animals. This trap does it all featuring a built on nose cone which allows it to be placed directly over an animal's burrow. When the animal leaves it's den, it must enter directly into the trap. When the front sliding door is removed, the flush mount trap door allows for positive sets which means when the trap is armed the door does not extend out past the trap frame. This allows the trap to be set flush against den openings on vertical surfaces forcing the animal to enter the trap when it leaves...

Weight: 14 lbs

Size: 30L x 8W x 8H

Wire: 1/2 x 1 - 14 gauge

$129⁷⁵

Select options

Chimney Adapter

CODE:C911CA

Designed to be used with 9x11 Double Door Comstock Cage Traps or will work with single door Comstock Cage Traps. Four flaps clip onto the body of the cage trap quickly and easily to form a rock solid unit. The 5" x 9" adapter slides into the chimney for stability. It is designed to accommodate both small and larger chimneys in order to capture raccoons exiting or entering when used with double door Comstock Cage Traps.

Weight: 6 lbs

Size: 24L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$92⁵⁰

Quantity:

+ −

Add to Cart

605.2 - Sheet Metal Covered Trap with Rear Sliding Door

CODE:605.2

Model 605.2 is our sheet metal covered skunk trap featuring an easy release rear door. The sheet metal cover will protect against direct spray. The release door allows for easy release of trapped animals and baiting of the trap. It weighs 6 pounds and measures 24L x 7W x 7H. These skunk traps are constructed from 1" x 1" - 14 gauge galvanized wire mesh and covered with 24 gauge sheet metal.

Weight: 6 lbs

Size: 24L x 7W x 7H

Wire: 1x1 - 14 GA with Sheet Metal Cover

$89⁷⁵

Select options

Comstock Chimney Trap

CODE:C59CHIM

Model C59CHIM is a trap designed to capture raccoons living in chimneys, to be dropped into a chimney from the top, and completely hidden from sight. It consists of the trap, trap flap, trap flap chain, trap stop, and chimney top mesh screen. The trap stop allows you to drop the trap into the chimney at any depth you prefer, the chimney top mesh screen will rest under the trap stop to prevent raccoons from entering the chimney and avoiding the trap. The trap flap will prevent raccoons from exiting the chimney and avoiding the trap. To save on shipping and space in transit, all the components fit nicely inside the trap until it is ready to...

Weight: 9 lbs

Size: 30L x 5W x 8H

Wire: 1/2 x 1 - 14 gauge

$255⁰⁰

Minimum quantity for "Comstock Chimney Trap" is 1.

Quantity:

+ −

Add to Cart

Tomahawk Chimney Trap

CODE:TCT12

Model TCT12 - The Tomahawk Chimney Trap is designed to fit over the chimney flue and is easily secured. It features two mounting flaps that can be used to secure the trap and cover larger openings to ensure the raccoon is directed into the trap. The trap is triggered when the raccoon exits the chimney, climbs up the trap, and pulls on the rear panel. This trap measures 36L x 12W x 12H" and is constructed of 1" x 1" – 12 gauge wire mesh frame with ¼" steel reinforcing rods for added strength. This trap also comes with a black powder coat finish.

Weight: 15 lbs

Size: 36L x 12W x 12H

Wire: 1 x 1 - 12 gauge

$175⁰⁰

Quantity:

+ −

Add to Cart

105.6 - Double Door Sheet Metal Covered Skunk Trap

CODE:105.6

Model 105.6 is our Original Series rigid double door sheet metal covered skunk trap. It features a sheet metal cover to help protect against direct spray. This trap has two trap doors to allow skunks to enter the trap from either end. Trap doors at both ends calms wary animals by allowing them to see through the trap without obstruction and enter with confidence. This trap measures 24L x 7W x 7H and is constructed from 1" x 1" - 14 gauge galvanized wire mesh and covered with 24 gauge sheet metal.

Weight: 8 lbs

Size: 24L x 7W x 7H

Wire: 1 x 1 - 14 gauge + Sheet Metal Cover

$99⁷⁵

Select options

Food Tray Kit for Pigeon Traps

CODE:PCF668

Food container accessory designed to fit any pigeon or bird trap or carrier that is 8" high or higher. Comes complete with 6 x 6 x 8" high wire mesh housing designed to keep food tray clean. Sheet metal food tray is included and measures 5 x 5 x 2". Model PCF668.

$30⁰⁰

Quantity:

+ −

Add to Cart

Water Tray Kit for Pigeon Traps

CODE:PCW668

Water container accessory designed to fit any pigeon or bird trap or carrier that is 8" high or higher. Comes complete with 6" x 6" x 8" high wire mesh housing designed to keep 28 oz. water container clean. Water container is included. Model PCW668.

$30⁰⁰

Quantity:

+ −

Add to Cart

Food & Water Tray Combo Kit for Pigeon Traps

CODE:PCWF668

Combination Kit containing PCF668 - Food Container and PCW668 – Water Bowl. These accessories are designed to fit any pigeon or bird trap or carrier that is 8" high or higher. Comes complete with 6 x 6 x 8" high wire mesh housing designed to keep food tray clean. Sheet metal food tray is included and measures 5 x 5 x 2". And 6 x 6 x 8" high wire mesh housing designed to prevent water bowl from tipping and keeping water clean. Model PCWF668

$50⁰⁰

Quantity:

+ −

Add to Cart

Clip on Water or Feed Bowl - 1 Cup

CODE:WC33

These hanging cage cups for pigeons, birds, and other animals have a Unique shift locking design so they can be easily clipped into wire mesh traps and cages. This keeps more active animals from knocking them off the wire. They are made in the USA from HDPE (high-density polyethylene) which makes them durable and gnaw resistant. Containers are both boil & freeze resistant for strength and sanitation. They are a thicker, more flexible plastic, and consequently are not prone to freeze and burst like most imported cage cups. The advantages to the hanging cage cups is they stay cleaner because caged birds and animals aren't as prone to...

$5²⁵

Quantity:

+ −

Add to Cart

Free shipping

Lenon's Beaver Super All Call

CODE:LLBEAVER

This beaver bait has a heavy grease consistency, is totally waterproof and contains plenty of high quality castor, essential oils, and unusual aromatics that make it irresistible to beaver in any season.

$12⁵⁰

Select options

Free shipping

Lenon's Muskrat Super All Call

CODE:LLMUSKRAT

Thick waterproof muskrat paste lure. A unique aroma of intensely sweet aromatics, essential oils, muskrat musk, and a remarkable secret ingredient used by no other lure maker.

$12⁵⁰

Select options

The Humane Roundhouse Trap

CODE:ROUNDHOUSE1

This unique trap is patent pending and was designed by inventor Randy Jack. The unique circle frame of this trap eliminates straight walls and corners for the animal to push against after being trapped. This trap features a removable bait dish, internal plastic cover to keep trapped animals calm and an easy release door for easy baiting, transfer and release. The trap measures 12" tall and has a 19" diameter. Inventor Randy Jack is a freelance pet product designer and former Portage County Humane Officer. He currently designs products for several companies around the world. DOWNLOADABLE INSTRUCTION MANUAL

Weight: 9 lbs

Size: 12" Tall x 19" Diameter

Wire: 1x1- 14ga

$119⁷⁵

Select options

Bait Box Triggered Squirrel Trap by Wildman Products

CODE:WMP601SS

Model WMP601SS is a Wildman Products professional series live trap for squirrels, chipmunks, gophers, rats and similar size animals. This trap measures 18L x 5W x 5H. It features a built in bait box that is also the trigger for the trap. Constructed of 1/2 x 1/2 - 16 gauge wire frame and heavy duty components. The tight mesh pattern provides extra strength and prevents critters from reaching into the trap to steal bait and also prevents animals that are trapped from reaching out of the trap and damaging property.

Weight: 2.5 lbs

Size: 18L x 5W x 5H

Wire: 1/2 x 1/2 - 16 gauge

$69⁹⁵

Select options

Free shipping

One Dozen Trap Mounting Clips

CODE:TMC1-

These heavy duty, metal, trap mounting clips can be used to mount traps to surfaces such as rooftops, decks and walls. These clips make securing traps almost too easy! This item has free shipping in the USA via standard post. These trap mounting clips are available in 12 packs, half pound packs (approx. 80 clips ) or one pound (approx. 160 clips) packages.

$10⁰⁰

Select options

Bird Eviction Door by Wildman Products

CODE:WMP44BD

This Bird Eviction Door is designed to let birds out of an entry point on a structure. Let birds remove themselves by installing the eviction door over the entry point with the included mounting tabs. Birds can easily push the clear acrylic door open but cannot push it in to gain re-entry. This eviction door measures 4" wide x 4" tall and is only 2" thick for easy placement even in tight areas. It is constructed of 1/2" x 1" - 14ga galvanized wire mesh and 1/8" thick clear acrylic.

Weight: 1 lbs

Size: 11L x 4W x 4H

Wire: 1/2 x 1 - 14 gauge + Clear Acrylic

$45⁰⁰

Quantity:

+ −

Add to Cart

The Cottom's Gottem Multi-Catch Raccoon Trap

CODE:MCRT100

This multi-catch raccoon trap features a unique gravity operated repeating trap door invented by Wildlife Control Professional Mike Cottom. The repeating door allows multiple raccoons to enter in a single set. It is a perfect trap for catching a mother raccoon AND all of her mobile kits. It has a flush mount door for positive setting and it's low profile design fits excellent into roof junctions, chimneys and other tight spaces. This trap must sit level or be tilted downward when in operation for the door to operate correctly. The trap also features a rear access door for easy removal and baiting. This trap...

Weight: 7.5 lbs

Size: 30L x 9W x 5H

Wire: 1/2 x 1 - 14 gauge

$169⁵⁴

Quantity:

+ −

Add to Cart

30" Diameter Culvert Style Bear Trap with Integrated Trailer

CODE:BEAR100

Model BEAR100 is our heavy-duty culvert style bear trap with integrated trailer that was designed with help from the US Department of Wildlife Services. This is the perfect mobile trap for capturing nuisance bears. It features a guillotine style trap door with adjustable trigger tension. The 8”x10” bait door at the back of the trap allows it to be baited without crawling in. It also has 4 adjustable stabilizers located at each corner of the trailer to allow it to be leveled and secure to the ground. Trap is well ventilated with vent holes throughout. The trailer also has a removable tongue to help...

Weight: 750 lbs

Size: 7 Feet long with 30" Diameter Culvert

$6,585⁰⁰

Quantity:

+ −

Add to Cart

Javelina Trap

CODE:JVT100

The Tomahawk Javelina Trap is an extra heavy-duty trap designed to hold up against the most aggressive Javelinas. It features a guillotine style trap door that is triggered when the Javelina enters the trap and steps on the trip pan. The trap frame is built from ½ x 1” – 14 gauge mesh and reinforced with ¼” steel rods wrapped around and welded to the frame. The guillotine door is built from 3/8” steel rod and designed to withstand the most ferocious Javelina head butts. Powder coating is standard on this trap to protect it against the elements for many years.

Weight: 37 lbs

Size: 42L x 14W x 24H

Wire: 1/2 x 1 - 14 gauge

$342⁵⁰

Select options

Free shipping

Pocket Snake Bag - Black

CODE:Pocket Snake Bag

Our pocket snake bag is made from lightweight diamond grid nylon and is designed for superior performance and feel. It is incredibly strong and very soft to the touch. The bag has an 18” opening and is 48” deep. The corners have been sewn so snakes cannot get their heads into the corner. These bags are long enough to twist off and add another snake. They roll up to a smaller size allowing you to fit multiple bags into your pocket. There are also two tie offs toward the top of the bag to secure it closed for transportation. * YOU CAN ALSO CALL US FOR CUSTOM SIZES at...

$21⁵⁰

Quantity:

+ −

Add to Cart

400L – Dockside Fish Live Box Lift

CODE:400L

Dockside Fish Live Box Lift allows you to quickly and easily drop your live box into the water or lift it up from the water with ease. Dockside lifts are designed for any wire mesh style live box to be quickly and easily attached with wing nuts which are provided. This device makes lifting a heavy live box full of fish a safe and effortless task. Two lag bolts or deck screws (not included) are required to attach Dockside Lift to your dock. Fish live box is not included with Dockside Lift and is sold separately.

Weight: 14 Lbs.

Size: 80L x 2 x 2"

Wire: Steel Strut

$125⁰⁰

Quantity:

+ −

Add to Cart

36" Diameter Culvert Style Bear Trap with Integrated Trailer

CODE:BEAR136

Model BEAR136 is our heavy-duty culvert style bear trap with integrated trailer that was designed with help from the US Department of Wildlife Services. This is the perfect mobile trap for capturing nuisance bears. It features a guillotine style trap door with adjustable trigger tension. The 8”x10” bait door at the back of the trap allows it to be baited without crawling in. It also has 4 adjustable stabilizers located at each corner of the trailer to allow it to be leveled and secure to the ground. Trap is well ventilated with vent holes throughout. The trailer also has a removable tongue to help...

Weight: 800 Lbs

Size: 7 Feet long with 36" Diameter Culvert

$6,985⁰⁰

Quantity:

+ −

Add to Cart

48" Diameter Culvert Style Bear Trap with Integrated Trailer

CODE:BEAR148

Model BEAR148 is our heavy-duty 48" culvert style bear trap with integrated trailer that was designed with help from the US Department of Wildlife Services. This is the perfect mobile trap for capturing nuisance bears. It features a guillotine style trap door with adjustable trigger tension. The 8”x10” bait door at the back of the trap allows it to be baited without crawling in. It also has 4 adjustable stabilizers located at each corner of the trailer to allow it to be leveled and secure to the ground. Trap is well ventilated with vent holes throughout. The trailer also has a removable tongue to...

Weight: 900 LBS

Size: 7 Feet long with 48" Diameter Culvert

$7,965⁰⁰

Quantity:

+ −

Add to Cart

AS36 - Auto Set 36" Gravity Cat Trap

CODE:AS36

Introducing the new “Auto-Set” Gravity Trap from Tomahawk Live Trap. Simply open the trap door and this trap automatically sets itself. When a cat steps on the trip plate, the front door drops by using gravity - no springs are involved. This makes the trap quieter than spring-loaded models and virtually eliminates any risk of injury to a cat or kitten from the falling door. Unlike other gravity traps on the market, the front door locks automatically! No clips or carabiners needed, no chance of the door opening if the trap accidentally rolls over. And, unlike any other trap on the market, just open the door and the...

Weight: 10 lbs

Size: 36L x 10W x 12H

Wire: 1x1-14ga with Bait Saver

$89⁷⁵

Select options

Multi-Catch Grey Squirrel Trap with Easy Transfer Eviction Door by Wildman Products

CODE:WMPRPT4

Wildman Products repeating, multi-catch grey squirrel trap featuring easy transfer eviction door. This trap features four mounting wings attached to the front of the trap to attach the trap directly over and animal entry/exit point on a structure. Squirrels can enter the repeating trap door but are unable to gain re-entry into the structure. The back of this trap has a unique Wildman Product easy transfer door for use with WMPRC4 removal cage. The removal cage pushes into the trap allowing you to remove trapped squirrels from the trap and leave the trap mounted for more squirrels that may still be in the structure OR if all animals are...

Weight: 3 lbs

Size: 24 x 4 x 4

Wire: 1/2 x 1 - 14 gauge

$59⁹⁵

Select options

Squirrel Removal Cage by Wildman Products

CODE:WMPRC1

Wildman Products squirrel removal cage. This removal cage has a cone front that pushes into 4" x 4" repeating trap doors allowing you to remove trapped squirrels from traps and leave the trap mounted for more squirrels that may still be in the structure. Best used with Wildman Repeating Trap model WMPRPT4 OR any other 4 x 4 multi-catch repeating traps. Simply push the cone door into the repeating door then open the transfer cage door by lifting on the door handle. After squirrels have been removed from traps you can easily transport them in this carrying cage or transfer again into a larger Wildman Products Multi-Chamber transfer...

Weight: 2 lbs

Size: 22 x 4 x 4

Wire: 1/2 x 1 - 14 gauge

$49⁹⁵

Select options

Four Chamber Squirrel Transfer Cage by Wildman Products

CODE:WMPSQT4C

Wildman Products four chamber squirrel transfer cage. This unique transfer cage is designed with four chambers each with it's own separate easy transfer eviction door. Best used with Wildman Products Squirrel Removal Cage for easy transfer from Wildman Products multi-catch squirrel trap . The squirrel removal cage fits perfectly into the easy transfer eviction door on the multi-catch trap AND this transfer cage for the easiest and safest, trap to transfer cage system ever available. Insert the cone of the squirrel removal cage into the doors of the trap then lift the door handle to allow quick and easy transfer then insert the...

Weight: 8.5 lbs

Size: 24 x 12 x 12

Wire: 1/2 x 1 - 14 gauge

$169⁷⁵

Select options

Wildman Products Grey Squirrel Removal Kit

CODE:WMPSKIT4

This kit comes with one each of Wildman Products 4" x 4" repeating grey squirrel trap, removal cage and four chamber transfer cage. This system allows you to trap, remove and transfer without having to remove mounted traps that contain animals. The repeating trap features wings to mount directly over an animal entry/exit point. After the animals are trapped use the removal cage to take animals out of the trap by inserting the removal cage cone into the trap and lifting the removal door by pushing the handle forward. Then easily transfer again into the four chamber transfer cage for transportation.

$251⁶⁹

Select options

502 - Collapsible Pigeon Trap with Two Trap Doors

CODE:502

Model 502 is new and improved with input from wildlife specialists. This trap collapses to just half an inch thick for easy transporting or storage and can catch and hold 15 or more pigeons at a time. This trap features two trap doors with swinging bobs to allow pigeons to enter the trap but not exit. Bait your target area with food and a water for several days before you introduce the trap. This trap measures 35L x 16W x 8H" when deployed and 35L x 24W x 1/2H when collapsed for storage or transportation.

Weight: 7 lbs

Size: 36L x 16W x 8H

Wire: 1 x 1 - 14 gauge

$79⁹⁵

Select options

SFG - 2 x 2.5 x 6.5 - Folding, Galvanized Trap

CODE:SFG

Sherman Trap model SFG is a 2 x 2.5 x 6.5, folding, 30ga. galvanized trap for mice and other very small animals.

Weight: 1 lb

Size: 2 x 2.5 x 6.5

Wire: 30Ga Galv

$27⁰⁵

Quantity:

+ −

Add to Cart

SNG - 2 x 2.5 x 6.5 - Rigid, Galvanized Trap

CODE:SNG

Sherman Trap model SNG is a 2 x 2.5 x 6.5, rigid, 30ga galvanized sheet metal trap. This trap is great for mice and other very small animals.

Weight: 1 lb

Size: 2 x 2.5 x 6.5

Wire: 30Ga Galvanized

$24⁸⁴

Quantity:

+ −

Add to Cart

SP1 - Two Chamber Sparrow Trap

CODE:SP1

Model SP1 is a rigid two chamber repeating sparrow trap. This trap measures 16L x 12W x 8H. It features two repeating trap doors and an elevated 2nd level holding area which eliminates their feeling of entrapment and the need to emit a distress call. It also has an access door for baiting and bird removal. This trap is designed to catch and hold up to 18 sparrows.

Weight: 4 lbs

Size: 16 x 12 x 8

Wire: ½ x 1 - 16 gauge

$64⁵⁰

Select options

SP2 - Sparrow Trap

CODE:SP2

Model SP2 is a rigid repeating sparrow trap. This trap measures 16L x 12W x 8H. It features two repeating trap doors and an access door for baiting and bird removal.

Weight: 4 lbs

Size: 16 x 12 x 8

Wire: ½ x 1 - 16 gauge

$49⁵⁰

Select options

SP3WF - Rigid 6 Door Sparrow Trap with Food & Water Tray

CODE:SP3WF

Model SP3WF is our large rigid repeating sparrow trap measuring 36L x 24W x 8H. It features 6 trap doors, food tray, and water bowl. Proven bi-level design makes this trap extremely effective. Birds enter the trap through the entry chamber and fly up into the holding area where they remain with access to food and water. It comes complete with sheet metal food tray and one quart water bowl.

Weight: 15 lbs

Size: 36L x 24W x 8H

Wire: ½ x 1 - 16 gauge

$199⁵⁰

Select options

Extra Large V-Style Starling and Sparrow Trap - 5' x 5' x 6'

CODE:STSPEXLG

Extra-large heavy duty starling and sparrow trap capable of capturing 200+ birds at one time. This solid and proven trap measure 5′ X 5′ X 6′ Tall. It is constructed from 1/2 X 1" inch 16 gauge galvanized wire mesh panels with a 1 x 1" angle iron frame. Frame comes powder coated to withstand the elements. This trap utilizes the V–top style trapping method which has proven to be the most effective. It includes a walk in entry door. It is easily deployed or collapsed in minutes and ships collapsed to minimize shipping costs. Assembly Video

Weight: 130 lbs

Size: 60L x 60W x 72H

Wire: ½ x 1 - 16 gauge

$795⁰⁰

Quantity:

+ −

Add to Cart

BT1000 - Extra Large Commercial Bird Trap

CODE:BT1000

Our Commercial Bird Trap was designed with help from the US Department of Wildlife Services. This is the perfect trap for large scale nuisance bird challenges like those encountered at airports, feed lots, and commercial agriculture operations. This trap features the proven and effective Australian Crow Trap design with V-style repeating trap door located on top of the trap that runs the entire length of the trap. The unique "Squeeze Panel" allows for captured birds to be pushed to one end of the trap and forced into a disposal bag. This bird removal system is easy to use and does the job quickly and effectively. There is a single...

$8,350⁰⁰

Quantity:

+ −

Add to Cart

BT2000 - Extra Large Commercial Bird Trap

CODE:BT2000

Our Extra-Large Commercial Bird Trap was designed with help from the US Department of Wildlife Services. This is the perfect trap for large scale nuisance bird challenges like those encountered at airports, feed lots, and commercial agriculture operations. This trap features the proven and effective Australian Crow Trap design with V-style repeating trap door located on top of the trap that runs the entire length of the trap. The unique "Squeeze Panel" allows for captured birds to be pushed to one end of the trap and forced into a disposal bag. This bird removal system is easy to use and does the job quickly and effectively. There are...

$9,875⁰⁰

Quantity:

+ −

Add to Cart

502-S - Collapsible Pigeon Trap with Two Trap Doors and Shade Cover

CODE:502-S

Model 502-S collapses to just a half inch thick for easy transporting or storage and can catch and hold 15 or more pigeons at a time. This trap features two trap doors with swinging bobs and a shade cover. This trap measures 35L x 16W x 8H" when deployed and 35L x 24W x 1/2H when collapsed for storage or transportation.

Weight: 7 lbs

Size: 36L x 16W x 8H

Wire: 1 x 1 - 14 gauge

$89⁹⁵

Select options

SNG-P - 2 x 2.5 x 6.5 - Rigid, Perforated, Galvanized Trap

CODE:SNG-P

Sherman Trap model SNG-P is a perforated, 2 x 2.5 x 6.5, rigid, 30Ga galvanized sheet metal trap. This trap is great for catching mice and other very small animals.

Weight: 1 lb

Size: 2 x 2.5 x 6.5

Wire: 30Ga Galvanized

$25⁸⁴

Quantity:

+ −

Add to Cart

SNAP17 - 17" Snap Trap for Birds

CODE:SNAP17

SNAP17 is our small bird trap designed like a suitcase. This trap is simple to use with proven results. When deployed the trap lays flat like an open suitcase. When birds disturb the food tray the trap is triggered causing the spring loaded nylon net to swing completely around and close over the birds to trap them quickly and safely. The snap trap is powder coated for rust resistance. Net is weather treated with a special green weather-protective coating for longer net life.This trap can be mounted on buildings, walls, and can even be put in trees. This trap is designed to catch woodpeckers and similar sized birds.

$109⁷⁵

Quantity:

+ −

Add to Cart

502R - Pigeon Trap with Two Trap Doors

CODE:502R

Model 502R is new and improved with input from wildlife control specialists. This trap is designed to catch and hold 15+ pigeons at a time. It features two, swinging bob, trap doors and release door on the top of the cage for easy removal.

Weight: 7 lbs

Size: 36 x 16 x 8

Wire: 1 x 1 - 14 gauge

$79⁹⁵

Select options

SNA - 2 x 2.5 x 6.5 - Rigid, Aluminum Trap

CODE:SNA

Sherman Trap model SNA is a 2 x 2.5 x 6.5, rigid, .020 aluminum trap. This trap is great for catching mice and other very small animals.

Weight: 1 lb

Size: 2 x 2.5 x 6.5

Wire: .020 Aluminum

$25⁹²

Quantity:

+ −

Add to Cart

502R-S - Pigeon Trap with Two Trap Doors and Shade Cover

CODE:502R-S

Model 502R-S is designed to catch and hold 15+ pigeons at a time. It features two, swinging bob, trap doors, a shade cover and a release door on the top of the cage for easy removal.

Weight: 7 lbs

Size: 36 x 16 x 8

Wire: 1 x 1 - 14 gauge

$89⁹⁵

Select options

SNAP24 - 24" Snap Trap for Birds

CODE:SNAP24

SNAP24 is our medium size bird trap designed like a suitcase. This trap is simple to use with proven results. When deployed the trap lays flat like an open suitcase. When birds disturb the food tray the trap is triggered causing the spring loaded nylon net to swing completely around and close over the birds to trap them quickly and safely. The snap trap is powder coated for rust resistance. Net is weather treated with a special green weather-protective coating for longer net life. This trap can be mounted on buildings, walls, and can even be put in trees. Designed to capture grackles, crows, ducks, and similar sized birds.

$129⁷⁵

Quantity:

+ −

Add to Cart

DS100 - Koonce Door Set Raccoon Trap with Flush Mount Door

CODE:DS100

Model DS100 is a heavy duty trap for raccoon's and similar size animals. This trap sets by simply lifting the door into the upright position. It works great for animals that burrow into trees and buildings. The recessed door enables you to set the trap flush against trees, buildings and walls. It Features a 1/4" steel rod frame wrapped with 14 gauge wire mesh. This trap measures 36L x 12W x 12H".

Weight: 18 lbs

Size: 36L x 12W x 12H

Wire: 1 x 1 - 14 guage

$125⁰⁰

Select options

SNA-P - 2 x 2.5 x 6.5 - Rigid, Perforated, Aluminum Trap

CODE:SNA-P

Sherman Trap model SNA-P is a perforated, 2 x 2.5 x 6.5, rigid, .020 aluminum trap for mice and other very small animals.

Weight: 1 lb

Size: 2 x 2.5 x 6.5

Wire: .020 aluminum

$25²⁰

Quantity:

+ −

Add to Cart

M35 - 3.5 x 3.5" Multiple Catch Rodent Trap

CODE:M35

Model M35 is a multiple catch trap that is great for small rodents such as chipmunks and small squirrels and can hold four or more at a time. This trap measures 26 x 3.5 x 3.5" and is constructed of 1/2 x 1" - 14 gauge wire mesh.

Weight: 2 lbs

Size: 26 x 3½ x 3½

Wire: ½ x 1 - 14 gauge

$32⁵⁰

Select options

SNATDG - 2 x 2.5 x 6.5 - Rigid, Aluminum Trap with Galvanized Door and Treadle

CODE:SNATDG

Sherman Trap model SNATDG is a 2 x 2.5 x 6.5, rigid, .020 aluminum trap with galvanized door and treadle.

Weight: 1 lb

Size: 2 x 2.5 x 6.5

Wire: .020 aluminum body with galvanized treadles & doors

$24⁸⁴

Quantity:

+ −

Add to Cart

502.5R - Rigid Pigeon Trap

CODE:502.5R

Model 502.5R pigeon trap is new and improved with input from wildlife specialists! Both trap door ends of the trap have been slanted inward making it easier for pigeons to find and enter the trap doors. This trap is designed to hold 15+ pigeons at a time. It features two swing panel entry doors and also a top access release door for easy bird removal. It measures 36L x 16W x 8H" and is constructed from 1x1" - 14 gauge galvanized wire mesh.

Weight: 7 lbs

Size: 36L x 16W x 8H

Wire: 1x1 - 14 Gauge

$79⁹⁵

Select options

Specialty Traps

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Extras

My Account

Customer Service

Tomahawk Live Trap

Specialty Traps

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media