Traps :: Comstock Series Traps

Comstock Chimney Trap

CODE:C59CHIM

Model C59CHIM is a trap designed to capture raccoons living in chimneys, to be dropped into a chimney from the top, and completely hidden from sight. It consists of the trap, trap flap, trap flap chain, trap stop, and chimney top mesh screen. The trap stop allows you to drop the trap into the chimney at any depth you prefer, the chimney top mesh screen will rest under the trap stop to prevent raccoons from entering the chimney and avoiding the trap. The trap flap will prevent raccoons from exiting the chimney and avoiding the trap. To save on shipping and space in transit, all the components fit nicely inside the trap until it is ready to...

Weight: 9 lbs

Size: 30L x 5W x 8H

Wire: 1/2 x 1 - 14 gauge

$255⁰⁰

Minimum quantity for "Comstock Chimney Trap" is 1.

Quantity:

+ −

Add to Cart

Post Style Swing Bar Conversion Kit for Comstock 9x11 Traps

CODE:CSBP2

Model CSBP2 is a Swing Bar Conversion Kit for Comstock Series 9x11 traps. This kit allows the older style swing bar with open trigger springs to be replaced with the new post mounted loop style trigger springs on all 9 x 11 Comstock traps. The kit consists of one powder coated swing bar complete with posts, two trigger springs, and 8 hog rings. With this kit the conversion is simple and shouldn't take more than a few minutes.

$29⁹⁵

Quantity:

+ −

Add to Cart

Comstock Squirrel Transfer Cage for 5 X 5 or Larger Swing Panel Traps

CODE:C44ST

This Comstock squirrel transfer cage is designed to fit traps that are 5W x 5H" or larger Comstock Series swing panel traps. Quickly and easily transfer squirrels from your traps into this transfer cage and redeploy your traps immediately. To perform the transfer with comstock swing panel traps press the door into the cone of the transfer cage. As you push the trap into the cone, the trap door of the trap will open and trapped squirrels will quickly move to the larger transfer cage. This cage can easily hold a dozen squirrels at one time. It also features a release door on one end of the cage. Cage is constructed from ½ x 1" – 14GA...

Weight: 7 lbs

Size: 30 x 10 x 10

Wire: 1/2 x 1 - 14 gauge

$85⁰⁰

Select options

Free shipping

One Dozen Trap Mounting Clips

CODE:TMC1-

These heavy duty, metal, trap mounting clips can be used to mount traps to surfaces such as rooftops, decks and walls. These clips make securing traps almost too easy! This item has free shipping in the USA via standard post. These trap mounting clips are available in 12 packs, half pound packs (approx. 80 clips ) or one pound (approx. 160 clips) packages.

$10⁰⁰

Select options

Free shipping

Trap Handle Cushion

CODE:THC-1

Trap Handle Cushions are made of neoprene and have a sewn on velcro strap to attach over a handle or set of handles. Available in Green or Black. Free shipping for this item within the U.S.A via USPS standard post or with other items ordered.

$7⁵⁰

Select options

Small Single Door Bobcat Trap

CODE:CB0918SD

Model CB0918SD is our small sized Comstock Series single door bobcat trap at 38 x 9 x 18". It features a wire trigger mechanism and fast closing, spring powered internal doors. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. This trap is also excellent for fox and similar sized animals. This trap can be nested inside the medium or large Comstock Series Bobcat Traps for saving storage and transportation space. All Comstock Series Traps are made to order and...

Weight: 17lbs

Size: 38L x 9W x 18H

Wire: 1.5 x 1.5 - 12 gauge

$238⁰⁰

Quantity:

+ −

Add to Cart

Medium Single Door Bobcat Trap

CODE:CB1021SD

Model CB1021SD is our medium sized Comstock Series single door bobcat trap at 38 x 10.5 x 21". It features a wire trigger mechanism and fast closing, spring powered internal door. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. This trap is also excellent for fox and similar sized animals. This trap can be nested inside the large Comstock Series Bobcat Trap and the smaller size can be nested inside of this trap for easy transportation and storage. All Comstock...

Weight: 17lbs

Size: 38L x 10.5W x 21H

Wire: 1.5 x 1.5 - 12 gauge

$250⁰⁰

Quantity:

+ −

Add to Cart

Large Single Door Bobcat Trap

CODE:CB1224SD

Model CB1224SD is our largest sized Comstock Series single door bobcat trap at 38 x 12 x 24". It features a wire trigger mechanism and fast closing, spring powered internal doors. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. This trap is also excellent for fox and similar sized animals. The small and medium comstock bobcat trap sizes can be nested inside of this trap for easy transportation and storage. All Comstock Series Traps are made to order and manufactured on a...

Weight: 17lbs

Size: 38L x 12W x 24H

Wire: 1.5 x 1.5 - 12 gauge

$275⁰⁰

Quantity:

+ −

Add to Cart

Single Door 2 Pack - Small and Medium Comstock Double Door Bobcat Traps with one Bi-Fold Trap Door

CODE:CBSDSM-2PCK

Save by purchasing this two pack of Comstock Series single door bobcat traps compared to individually. They features a wire trigger mechanism and a fast closing, spring powered internal door. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. These traps are also excellent for fox and similar sized animals. This Kit includes the Small(38x9x18) and Medium(38x10.5x21) sized Comstock Series Single Door Bobcat Traps. All Comstock Series Traps are made to order and...

$475⁹⁵

Quantity:

+ −

Add to Cart

Single Door 2 Pack - Medium and Large Comstock Double Door Bobcat Traps with one Bi-Fold Trap Door

CODE:CBSDML-2PCK

Save by purchasing this two pack of Comstock Series single door bobcat traps compared to individually. They features a wire trigger mechanism and a fast closing, spring powered internal door. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. These traps are also excellent for fox and similar sized animals. This Kit includes the Medium (38x10.5x21) and Large (38x12x24) sized Comstock Series Single Door Bobcat Traps. All Comstock Series Traps are made to order and...

$523⁴⁵

Quantity:

+ −

Add to Cart

Single Door 3 Pack - Small, Medium and Large Comstock Single Door Bobcat Traps with One Bi-Fold Trap Door

CODE:CBSD-3PCK

Save by purchasing this three pack of Comstock Series Single door bobcat traps compared to individually. They features a wire trigger mechanism and fast closing, spring powered internal doors. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. These traps are also excellent for fox and similar sized animals. This Kit includes the small (38x9x18), medium(38x10.5x21) and large(38x12x24) sized Comstock Series Single Door Bobcat Traps. All Comstock Series Traps are made to...

$749⁵⁵

Quantity:

+ −

Add to Cart

Small Double Door Bobcat Trap with Two Bi-Fold Trap Doors

CODE:CB0918DD

Model CB0918DD is our smallest size of Comstock Series double door bobcat traps at 38 x 9 x 18". It features a wire trigger mechanism and fast closing, spring powered internal doors. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. This trap is also excellent for fox and similar sized animals. This trap can be nested inside the medium and large Comstock Series Bobcat Traps for easy transportation and storage. All Comstock Series Traps are made to order and...

Weight: 17 lbs

Size: 38L x 9W x 18H

Wire: 1.5 x 1.5 - 12 gauge

$294⁰⁰

Select options

Medium Double Door Bobcat Trap with Two Bi-Fold

CODE:CB1021DD

Model CB1021DD is our middle sized Comstock Series double door bobcat trap at 38 x 10.5 x 21". It features a wire trigger mechanism and fast closing, spring powered internal doors. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. This trap is also excellent for fox and similar sized animals. This trap can be nested inside the large Comstock Series Bobcat Trap and the small size can be nested inside of this trap for easy transportation and storage. All Comstock Series...

Weight: 19 lbs

Size: 38L x 10.5W x 21H

Wire: 1.5 x 1.5 - 12 gauge

$315⁰⁰

Select options

Large Double Door Bobcat Trap with Two Bi-Fold

CODE:CB1224DD

Model CB1224DD is our largest Comstock Series double door bobcat trap at 38 x 12 x 24". It features a wire trigger mechanism and fast closing, spring powered internal doors. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. This trap is also excellent for fox and similar sized animals. All of our smaller sized Comstock Series Bobcat Traps can be nested inside this trap for easy transportation and storage. All Comstock Series Traps are made to order and manufactured on...

Weight: 21 lbs

Size: 38L x 12W x 24H

Wire: 1.5 x 1.5 - 12 gauge

$336⁰⁰

Select options

Double Door 2 Pack - Small and Medium Comstock Double Door Bobcat Traps with Two Bi-Fold Trap Doors

CODE:CBDDSM-2PCK

Save by purchasing this two pack of Comstock Series double door bobcat traps compared to individually. They features a wire trigger mechanism and fast closing, spring powered internal doors. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. These traps are also excellent for fox and similar sized animals. This Kit includes the Small(38x9x18) and Medium(38x10.5x21) sized Comstock Series Bobcat Traps. All Comstock Series Traps are made to order and manufactured on a...

$578⁵⁵

Quantity:

+ −

Add to Cart

Double Door 2 Pack - Medium and Large Comstock Double Door Bobcat Traps with Two Bi-Fold Trap Doors

CODE:CBDDML-2PCK

Save by purchasing this two pack of Comstock Series double door bobcat traps compared to individually. They features a wire trigger mechanism and fast closing, spring powered internal doors. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. These traps are also excellent for fox and similar sized animals. This Kit includes the Medium(38x10.5x21) and Large(38x12x24) sized Comstock Series Bobcat Traps. All Comstock Series Traps are made to order and manufactured on a...

$618⁴⁵

Quantity:

+ −

Add to Cart

Double Door 3 Pack - Small, Medium and Large Comstock Double Door Bobcat Traps with Two Bi-Fold Trap Doors

CODE:CBDD-3PCK

Save by purchasing this three pack of Comstock Series double door bobcat traps compared to individually. They features a wire trigger mechanism and fast closing, spring powered internal doors. Unlike other bobcat traps with external guillotine doors that extend well above the frame, these traps have "zero" clearance because nothing extends beyond the confines of the trap body itself upward or outward. These traps are also excellent for fox and similar sized animals. This Kit includes the Small (38x9x18), Medium(38x10.5x21) and Large (38x12x24) sized Comstock Series Double Door Bobcat Traps. All Comstock Series Traps are made to...

$897⁷⁵

Quantity:

+ −

Add to Cart

Free shipping

CDS - Comstock Trap Door Setting Tool

CODE:CDS

Comstock Series Traps have powerful trap doors. This tool makes setting the trap door easy by allowing you to easily lift the door with one hand and set the door trigger hook with the other. This handy setter not only makes setting the Comstock powered door cage traps fast and easy, it allows for the easy release of captured animals too. The handle keeps your hand up and out of the way, well above the trap as the trapped animal exits the cage. Of course, Comstock cages do not require the use of a setting tool, this just makes setting easier and releasing animals safer. This item ships for free within the contiguous USA. Note: If...

$35⁰⁰

Quantity:

+ −

Add to Cart

C911DD-18 - 18L x 9W x 11H - Comstock Double Door

CODE:C911DD-18

Model C911DD-18 is designed for raccoon, woodchuck, opossum, rabbits and similar size animals. It weighs 11 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 18L x 9W x 11H. This trap has two trap doors and is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap doors. The doors lock into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the most trap shy animals and does not a have a trip pan for...

Weight: 11 lbs

Size: 18L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$179⁵⁰

Select options

C911FD-24 - 24L x 9W x 11H - Comstock Double Door With One Flush Mounted Door

CODE:C911FD-24

Model C911FD-24 is designed for raccoon, woodchuck, armadillo and similar size animals. This trap has an overall length of 24" with an 18" catch compartment. It weighs 12 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 24L x 9W x 11H. This trap has two trap doors with one flush mounted. This means you can “positive set" the trap against a vertical den opening such as against a wall. The door remains completely inside the trap when the trap door is open and the trap is set. This trap is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap...

Weight: 12 lbs

Size: 24L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$195⁰⁰

Select options

C911MP - 36Lx9Wx11H - Comstock Multipurpose Double Door

CODE:C911MP

There are no traps more versatile than Model C911MP. The Comstock Multipurpose Trap measures 36L x 9W x11H, is constructed of 1/2" x 1" wire mesh throughout the trap and weighs approximately 18 lbs. It features a built in 3-way nose cone for mounting over dens or entry points on structures. With two doors, this unique cage trap will capture animals coming from two directions in a trail situation. Utilizing a bottom opening in the nose cone, it will also capture animals entering or exiting dens, free standing, or up against structure. With it's 3-way nose cone this trap can accommodate up to two additional traps due to side flaps located...

Weight: 18 lbs

Size: 36L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$249⁷⁵

Select options

C911DD-24 - 24L x 9W x 11H - Comstock Double Door

CODE:C911DD-24

Model C911DD-24 is designed for raccoon, armadillo, skunks, woodchuck, opossum, rabbits and similar size animals. It weighs 12 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 24L x 9W x 11H. This trap has two trap doors and is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap doors. The doors lock into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the most trap shy animals and does not a...

Weight: 12 lbs

Size: 24L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$184⁵⁰

Select options

C911FD-30 - 30L x 9W x 11H - Comstock Double Door With One Flush Mounted Door

CODE:C911FD-30

Model C911FD-30 is designed for armadillos, skunks, wood chucks, rabbits and similar size animals. This trap has an overall length of 30" with a 24" catch compartment. It weighs 13 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 30L x 9W x 11H. This is a two door trap with one of the doors flush mounted. This means you can “positive set" the trap against a vertical den opening such as against a wall. The door remains completely inside the trap when the trap door is open and the trap is set. This trap is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that...

Weight: 13 lbs

Size: 30L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$200⁰⁰

Select options

C911DD-30 - 30L x 9W x 11H - Comstock Double Door

CODE:C911DD-30

Model C911DD-30 is designed for raccoon, armadillos, skunks, wood chucks, opossum rabbits and similar size animals. It weighs 13 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 30L x 9W x 11H. This trap has two trap doors and is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap doors. The doors lock into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the most trap shy animals and does not a...

Weight: 13 lbs

Size: 30L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$189⁵⁰

Select options

C911FD-36 - 36L x 9W x 11H - Comstock Double Door With One Flush Mounted Door

CODE:C911FD-36

Model C911FD-36 is designed for raccoon, armadillos, skunks, wood chucks, rabbits and similar size animals. This trap has an overall length of 36" with a 30" catch compartment. It weighs 14 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 36L x 9W x 11H. This is a two door trap with one door flush mounted. This means you can “positive set" the trap against a vertical den opening such as against a wall. The door remains completely inside the trap when the trap door is open and the trap is set. This trap is strong, reliable, durable, and requires little maintenance. It features super strong coil springs...

Weight: 14 lbs

Size: 36L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$205⁰⁰

Select options

C911DD-36 - 36L x 9W x 11H - Comstock Double Door

CODE:C911DD-36

Model C911DD-36 is designed for raccoon, armadillos, skunks, wood chucks, fisher, opossum, rabbits and similar size animals. It weighs 14 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 36L x 9W x 11H. This is a two door trap that is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap doors. The doors lock into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the most trap shy animals and does...

Weight: 14 lbs

Size: 36L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$194⁵⁰

Select options

C911SD-18 - 18L x 9W x 11H - Comstock Single Door

CODE:C911SD-18

Model C911SD-18 is designed for raccoon, woodchuck and similar size animals. It weighs 13 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 18L x 9W x 11H. This single door trap is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap door. The door locks into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the most trap shy animals and does not have a trip pan for animals to avoid. All Comstock...

Weight: 13 lbs

Size: 18L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$147⁰⁰

Select options

C911SD-24 - 24L x 9W x 11H - Comstock Single Door

CODE:C911SD-24

Model C911SD-24 is designed for raccoon, woodchuck and similar size animals. It weighs 13 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 24L x 9W x 11H. This trap has one trap door and is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap door. The door locks into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the most trap shy animals and does not have a trip pan for animals to avoid. All...

Weight: 14 lbs

Size: 24L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$152²⁵

Select options

C911SD-30 - 30L x 9W x 11H - Comstock Single Door

CODE:C911SD-30

Model C911SD-30 is designed for raccoon, armadillos, skunks, wood chucks, fisher, opossum and similar size animals. It weighs 15 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 30L x 9W x 11H. This is a heavy duty professional trap with one trap door. This trap is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap door. The door locks into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the...

Weight: 15 lbs

Size: 30L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$157⁵⁰

Select options

C911SD-36 - 36L x 9W x 11H - Comstock Single Door

CODE:C911SD-36

Model C911SD-36 is designed for raccoon, armadillos, skunks, wood chucks, fisher, opossum and similar size animals. It weighs 14 lbs, measures 36L x 9W x 11H and is constructed of 1/2" x 1" wire mesh throughout the trap. This trap has one trap door and is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap door. The door locks into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the most trap shy animals and does not have...

Weight: 14 lbs

Size: 36L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$162⁷⁵

Select options

CB12DD-36 - Comstock Double Door Trap with 1.5" x 1.5" Wire Mesh

CODE:CB12DD-36

Model CB12DD-36, Beaver/Raccoon 12x12 Double Door Trap. This trap measures 36L x 12W x 12H and is constructed with 1.5" x 1.5" 12 gauge wire mesh. Like the larger 12x18 swim through Comstock Beaver Cage Trap, the 12x12 is designed for beaver and otter to be used in smaller runs, tighter spots, to be placed upside down, but will perform in any position. The 12x12 sized cage traps have captured beaver 50 pounds and larger. Placed on land the 12x12 will capture large raccoon, armadillos, otters, opossums, woodchucks, skunks, fishers, like size animals and even bobcats. All Comstock Series Traps are made to order and manufactured on a first...

Weight: 16 lbs

Size: 36L x 12W x 12H

Wire: 1-1/2 x 1-1/2 12 Gauge

$241⁵⁰

Select options

C12DD-36 - Comstock Double Door Trap with 1/2" x 1" Wire Mesh

CODE:C12DD-36

Model C12DD-36 measures 36L x 12W x 12H and is constructed with with 1" x 1/2" 14 gauge wire mesh. Like the larger 12x18 swim through Comstock Beaver Cage Trap, the 12x12 is designed for beaver and otter to be used in smaller runs, tighter spots, to be placed upside down, but will perform in any position. The 12x12 sized cage traps have taken beaver 50 pounds and larger. Placed on land the 12x12 will take large raccoon, armadillos, otters, opossums, woodchucks, skunks, fishers, like size animals and even bobcats. All Comstock Series Traps are made to order and manufactured on a first in first out basis. Please allow additional processing...

Weight: 16 lbs

Size: 36L x 12W x 12H

Wire: 1/2 x 1 - 14 gauge

$252⁵⁰

Select options

C12BD-36 - Comstock Series Single Door Trap with Bait Door and 1/2" x 1" Wire Mesh

CODE:C12BD-36

Model C12BD-36 measures 36L x 12W x 12H and is constructed with 1 x 1/2" - 14 gauge. Like the larger 12x18 swim through Comstock Beaver Cage Trap, the 12x12 is designed for beaver and otter to be used in smaller runs, tighter spots, to be placed upside down, but will perform in any position. The 12x12 sized cage traps have taken beaver 50 pounds and larger. Placed on land the 12x12 will take large raccoon, armadillos, otters, opossums, woodchucks, skunks, fishers, like size animals and even bobcats. All Comstock Series Traps are made to order and manufactured on a first in first out basis. Please allow additional processing time for this...

Weight: 16 lbs

Size: 36L x 12W x 12H

Wire: 1 x 1/2 - 14 gauge

$236⁵⁰

Select options

C12SD-36 - Comstock Series Single Door Trap with 1/2" x 1" Wire Mesh

CODE:C12SD-36

Model C12SD-36 measures 36L x 12W x 12H and is constructed with 1"x 1/2" - 14 gauge. Like the larger 12 x 18 swim through Comstock Beaver Cage Trap, the 12x12 is designed for beaver and otter to be used in smaller runs, tighter spots, to be placed upside down, but will perform in any position. The 12x12 sized cage traps have taken beaver 50 pounds and larger. Placed on land the 12x12 will take large raccoon, armadillos, otters, opossums, woodchucks, skunks, fishers, like size animals and even bobcats. All Comstock Series Traps are made to order and manufactured on a first in first out basis. Please allow additional processing time for...

Weight: 16 lbs

Size: 36L x 12W x 12H

Wire: 1 x 1/2 - 14 gauge

$215⁵⁰

Select options

C911BD-18 - 18L x 9W x 11H - Comstock Single Door with Rear Bait Door

CODE:C911BD-18

Model C911BD-18 is designed for racoon, woodchuck, and similar size animals. It weighs 13 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 18L x 9W x 11H. This trap has one trap door and is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap door. The door locks into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the most trap shy animals and does not have a trip pan for animals to avoid. All...

Weight: 13 lbs

Size: 18L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$162⁷⁵

Select options

C911BD-24 - 24L x 9W x 11H - Comstock Single Door with Rear Bait Door

CODE:C911BD-24

Model C911BD-24 is designed for raccoon, armadillo, woodchuck, opossum and similar size animals. It weighs 14 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 24L x 9W x 11H. This trap has one trap door and a rear release/bait door. It is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap door. The door locks into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the most trap shy animals and...

Weight: 14 lbs

Size: 24L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$168⁷⁵

Select options

C911BD-30 - 30L x 9W x 11H - Comstock Single Door With Rear Bait Door

CODE:C911BD-30

Model C911BD-30 is designed for raccoons, armadillos, skunks, wood chucks, fisher, opossum and similar size animals. It weighs 13 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 30L x 9W x 11H. This is a heavy duty professional trap with one trap door. This trap is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap door. The door locks into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the...

Weight: 13 lbs

Size: 30L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$174⁷⁵

Select options

C911BD-36 - 36L x 9W x 11H - Comstock Single Door with Rear Bait Door

CODE:C911BD36

Model C911BD-36 is designed for racoons, armadillos, skunks, wood chucks, fisher, opossum and similar size animals. It weighs 14 lbs, is constructed of 1/2" x 1" wire mesh throughout the trap and measures 36L x 9W x 11H. This trap has one trap door and a rear bait door. This trap is strong, reliable, durable, and requires little maintenance. It features super strong coil springs that power the trap door. The door locks into place which prevents animals from escaping, even if the trap is rolled over or flipped completely upside down. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the most trap...

Weight: 14 lbs

Size: 36L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$180⁷⁵

Select options

Comstock Double Door Beaver Trap

CODE:CB39DD

Model CB39DD is a unique beaver trap. It is designed for beavers and otters as a swim through trap to be used under water or partially under water, but can also be used in shallow water or on land. These beaver traps perform best when set upside down in water. The powerful doors actually lift and push the animal into the trap. This Comstock Series Beaver trap weighs 23 lbs, is constructed of 1.5" x 1.5" wire mesh and measures 39L x 18W x 12H. This is a heavy duty professional trap with two trap doors. This trap is triggered by a swing bar wire trigger mechanism which allows you to capture the most trap shy animals and does not have a...

Weight: 23 lbs

Size: 39L x 18W x 12H

Wire: 1.5" x 1.5" - 12 gauge

$375⁰⁰

Select options

C3524- 24L x 3W x 5H - Swing Panel Trap For Squirrels, Chipmunks, Gophers and Similar Size Animals

CODE:C3524

Model C3524 features flush mount powered double trap doors. It is designed to fit in rain gutters and capture all types of squirrels, chipmunks, gophers, and similar size animals. The unique push through pan-less swing panel trigger makes it virtually impossible for an animal to pass through the trap without capture. Spring powered double doors will take animals from two directions when set right side up, sideways, or vertical. It weighs 2 lbs and measures 24L x 3W x 5H. This trap is strong, reliable, durable, and requires little maintenance.

Weight: 2 lbs

Size: 24L x 3W x 5H

Wire: ½ x 1 - 14 ga

$50⁰⁰

Select options

Comstock Double Door Beaver Trap with Escape Door

CODE:CB39DDED

Model CB39DDED is a unique beaver trap. This model features a built in escape door for otter and other non target catches that can be left open. It is designed for beavers and otters as a swim through trap to be used under water or partially under water, but can also be used in shallow water or on land. These beaver traps perform best when set upside down in water. The powerful doors actually lift and push the animal into the trap. This Comstock Series Beaver trap weighs 23 lbs, is constructed of 1.5" x 1.5" wire mesh and measures 39L x 18W x 12H. This is a heavy duty professional trap with two trap doors. This trap is triggered by a...

Weight: 23 lbs

Size: 39L x 18W x 12H

Wire: 1.5" x 1.5" - 12 gauge

$395⁰⁰

Quantity:

+ −

Add to Cart

C5524 - 24L x 5W x 5H - Swing Panel Trap For Squirrels, Chipmunks, Gophers, Rats and Similar Size Animals

CODE:C5524

Model C5524 features flush mount powered double trap doors. It is designed to capture all types of squirrels, chipmunks, gophers, rats and similar size animals. It even captures muskrats and mink in water. This trap will function as a walk through or swim through device. The unique push through pan-less swing panel trigger makes it virtually impossible for an animal to pass through the trap without capture. Spring powered double doors will take animals from two directions when set right side up, sideways, or vertical. It weighs 3 lbs and measures 24L x 5W x 5H. This trap is strong, reliable, durable, and requires little maintenance.

Weight: 3 lbs

Size: 24L x 5W x 5H

Wire: ½ x 1 - 14 ga

$50⁰⁰

Select options

C6626- 26L x 6W x 6H - Swing Panel Trap For Squirrels, Chipmunks, Gophers, Rats adn Similar Size Animals

CODE:C6626

Model C6626 features flush mount powered double trap doors. It is designed to capture all types of squirrels, chipmunks, gophers, rats and similar size animals. It even captures muskrats and mink in water. This trap will function as a walk through or swim through device. The unique push through pan-less swing panel trigger makes it virtually impossible for an animal to pass through the trap without capture. Spring powered double doors will take animals from two directions when set right side up, sideways, or vertical. It weighs 4 lbs and measures 26L x 6W x 6H. This trap is strong, reliable, durable, and requires little maintenance.

Weight: 4 lbs

Size: 26L x 6W x 6H

Wire: ½ x 1 – 14 ga

$55⁰⁰

Select options

C6830 - 30L x 8W x 6H - Swing Panel Trap For Squirrels, Skunks, Rabbits, Cats and similar size animals.

CODE:C6830

Model C6830 features flush mount powered double trap doors. It is designed to capture all types of squirrels, skunks, rabbits, cats, and similar size animals. The unique push through pan-less swing panel trigger makes it virtually impossible for an animal to pass through the trap without capture. Spring powered double doors will take animals from two directions when set right side up, sideways, or vertical. It weighs 8 lbs and measures 30L x 8W x 6H. This trap is strong, reliable, durable, and requires little maintenance.

Weight: 8 lbs

Size: 30L x 8W x 6H

Wire: ½ x 1 – 14 ga

$65⁰⁰

Select options

C7732 - 32L x 7W x 7H - Swing Panel Trap for Rabbits, Skunks, Cats and Similar Size Animals

CODE:C7732

Model C7732 features flush mount powered double trap doors. It is designed to capture all types of squirrels, skunks, rabbits, cats, and similar size animals. The unique push through pan-less swing panel trigger makes it virtually impossible for an animal to pass through the trap without capture. Spring powered double doors will take animals from two directions when set right side up, sideways, or vertical. It weighs 8 lbs and measures 36L x 7W x 7H. This trap is strong, reliable, durable, and requires little maintenance.

Weight: 8 lbs

Size: 32L x 7W x 7H

Wire: 1 x 1/2 – 14 ga

$65⁰⁰

Select options

C7736 - 36L x 7W x 7H - Swing Panel Trap For Squirrels, Skunks, Rabbits, Cats and Similar Size Animals

CODE:C7736

Model C7736 features flush mount powered double trap doors. It is designed to capture all types of squirrels, skunks, rabbits, cats, and similar size animals. The unique push through pan-less swing panel trigger makes it virtually impossible for an animal to pass through the trap without capture. Spring powered double doors will take animals from two directions when set right side up, sideways, or vertical. It weighs 8 lbs and measures 36L x 7W x 7H. This trap is strong, reliable, durable, and requires little maintenance.

Weight: 8 lbs

Size: 36L x 7W x 7H

Wire: ½ x 1 – 14 ga

$70⁰⁰

Select options

C81036 - 36L x 10W x 8H - Swing Panel Trap for Rabbits, Opossums, Skunks, Cats and Similar Size Animals

CODE:C81036

Model C81036 features flush mount powered double trap doors. It is designed to capture rabbits, opossums, skunks, cats, and similar size animals. The unique push through pan-less swing panel trigger makes it virtually impossible for an animal to pass through the trap without capture. Spring powered double doors will take animals from two directions when set right side up, sideways, or vertical. It weighs 7 lbs and measures 36L x 8W x 10H. This trap is strong, reliable, durable, and requires little maintenance.

Weight: 7 lbs

Size: 36L x 8W x 10H

Wire: 1 x 1/2 – 14 ga

$80⁰⁰

Select options

C911FMA - Flush Mount Adapter for All 9x11 Comstock Series Traps

CODE:C911FMA

Convert any Comstock 9x11 trap into a flush mount trap with this adapter. These trap extensions guide animals directly from a den opening into a trap. When a standard Comstock Series Trap is set with the door open, the door extends a few inches past the trap frame which prevents it from being flush mounted. However, flush mount adapters extend the length of the trap past the open door, allowing the trap to be mounted flush against a wall or any other structure. This accessory measures 6L x 9W x 11H and is constructed from 1" x 1" wire mesh.

Weight: 2.5 lbs

Size: 6L x 9W x 11H

Wire: 1 x 1 - 14 gauge

$60⁰⁰

Quantity:

+ −

Add to Cart

C1212FMA - Flush Mount Adapter for All 12 x 12 Comstock Series Traps

CODE:C1212FMA

Convert any Comstock 12x12 trap into flush mount trap with this adapter. When a trap is set with the door open, the door extends a few inches past the trap frame which prevents it from being flush mounted. However, flush mount adapters extend the length of the trap past the open door, allowing the trap to be mounted flush against a wall or any other structure. To use, place the flush mount adapter in position against a wall and over the animals den opening. Model C1212FMA measures 7L x 12W x 12H and is constructed of 1x1 - 14 gauge wire mesh.

Weight: 3.5 lbs

Size: 7L x 12W x 12H

Wire: 1 x 1 - 14 gauge

$65⁰⁰

Quantity:

+ −

Add to Cart

Chimney Adapter

CODE:C911CA

Designed to be used with 9x11 Double Door Comstock Cage Traps or will work with single door Comstock Cage Traps. Four flaps clip onto the body of the cage trap quickly and easily to form a rock solid unit. The 5" x 9" adapter slides into the chimney for stability. It is designed to accommodate both small and larger chimneys in order to capture raccoons exiting or entering when used with double door Comstock Cage Traps.

Weight: 6 lbs

Size: 24L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$92⁵⁰

Quantity:

+ −

Add to Cart

Comstock Series Traps

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Extras

My Account

Customer Service

Tomahawk Live Trap

Comstock Series Traps

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media