Trap Accessories

301 - Top Opening Cage - Rabbit/Opossum Size

CODE:301

Model 301 is a top opening cage for rabbits, opossums and similar size animals. The entire top of this cage is a swinging door for placing animals in and out of the cage. This transfer cage measures 16L x 9W x 10H" and is constructed of 1 x 1" - 14 gauge wire mesh. This cage has a sheet metal tray bottom for animal feet comfort and it is removable for easy cleaning.

Weight: 4 lbs

Size: 16L x 9W x 10H

Wire: 1 x 1 - 14 gauge

$69⁹⁵

Select options

303 - Top Opening Cage - Raccoon/Cat Size

CODE:303

Model 303 is a top opening cage for raccoon, cats and similar size animals. The entire top of this cage is a swinging door for placing animals in and out of the cage. This transfer cage measures 20L x 11W x 12H" and is constructed of 1 x 1" - 12 gauge wire mesh. This cage has a removable plastic tray for animal comfort and easy cleaning.

Weight: 6 lbs

Size: 20L x 11W x 12H

Wire: 1 x 2 - 12 gauge

$79⁹⁵

Select options

302 - End Opening Cage - Rabbit/Opossum Size

CODE:302

Model 302 is an end opening cage for rabbits, opossums and similar size animals. One entire end of this cage is a swinging door for placing animals in and out of the cage. This transfer cage measures 16L x 9W x 10H" and is constructed of 1 x 1" - 14 gauge wire mesh. This cage has a sheet metal tray bottom for animal feet comfort and it is removable for easy cleaning.

Weight: 5 lbs

Size: 16L x 9W x 10H

Wire: 1 x 1 - 14 gauge

$69⁹⁵

Select options

304 - End Opening Cage - Raccoon/Cat Size

CODE:304

Model 304 is an end opening cage for raccoons, cats and similar size animals. One entire end of this cage is a swinging door for placing animals in and out of the cage. This transfer cage measures 20L x 10W x 12H" and is constructed of 1 x 2" - 12 gauge wire mesh. This cage has a plastic tray bottom for animal feet comfort and it is removable for easy cleaning.

Weight: 7 lbs

Size: 20L x 11W x 12H

Wire: 1 x 2 - 12 gauge

$79⁹⁵

Select options

Stainless Cage Cup with Cage Bar Mount - 1 Pint

CODE:6001

Cage cups are ideal for providing food and water to animals in traps or cages. The mounting bracket easily attaches on any trap or transfer cage. The cup slides in and out of the mounting bracket for easy cleaning and refilling.

Weight: 1 lbs

Size: 1 Pint

Wire: Stainless Cup

$73⁹²

Quantity:

+ −

Add to Cart

Stainless Cage Cup Double Dish with Cage Bar Mount - 1 Pint

CODE:6003

Cage cups are ideal for providing food and water to animals in traps or cages. The mounting bracket easily attaches on any trap or transfer cage. The cup slides in and out of the mounting bracket for easy cleaning and refilling.

Weight: 1 lbs

Size: 1 Pint - Double Cup

Wire: Stainless Cup

$79⁸⁶

Quantity:

+ −

Add to Cart

Stainless Cage Cup with Cage Bar Mount - 1 Quart

CODE:6004

Cage cups are ideal for providing food and water to animals in traps or cages. The mounting bracket easily attaches on any trap or transfer cage. The cup slides in and out of the mounting bracket for easy cleaning and refilling.

Weight: 1 lbs

Size: 1 Quart

Wire: Stainless Cup

$76³²

Quantity:

+ −

Add to Cart

Stainless Cage Cup Double Dish with Cage Bar Mount - 1 Quart

CODE:6005

Cage cups are ideal for providing food and water to animals in traps or cages. The mounting bracket easily attaches on any trap or transfer cage. The cup slides in and out of the mounting bracket for easy cleaning and refilling.

Weight: 1 lbs

Size: 1 Quart

Wire: Stainless Cup

$91¹⁷

Quantity:

+ −

Add to Cart

305DD - Transfer Cage with Top Door and Sliding Door - Rabbit Size

CODE:305DD

Model 305DD is a transfer cage with two doors for easy transportation of animals. It comes equipped with a sliding transfer door at one end and also a top opening door. The sliding door is designed to match up with the rear sliding door on our 9W x 9H" traps. This transfer cage measures 16L x 9W x 10H" and is constructed of 1 x 1" - 14 gauge wire mesh. This cage has a sheet metal tray bottom for animal feet comfort and it is removable for easy cleaning.

Weight: 5 lbs

Size: 16L x 9W x 10H

Wire: 1 x 1 - 14 gauge

$89⁹⁵

Select options

306DD - Transfer Cage with Top Door and Sliding Door - Cat/Raccoon Size

CODE:306DD

Model 306DD is a transfer cage for cats and similar size animals. It comes equipped with a sliding transfer door at one end and also a top opening door. The sliding door is designed to line up with the rear transfer door of our 10W x 12H" and 10W x 10H" traps. This transfer cage measures 20L x 11W x 12H" and is constructed of 1 x 1" - 12 gauge wire mesh. This cage has a plastic tray bottom for animal feet comfort and it is removable for easy cleaning.

Weight: 8 lbs

Size: 20L x 11W x 12H

Wire: 1 x 1 - 12 gauge

$109⁹⁵

Select options

307DD - Transfer Cage with Top Door and Sliding Door - Small Dog Size

CODE:307DD

Model 307DD is a transfer cage for small dogs and similar size animals. It comes equipped with a sliding transfer door at one end and also a top opening door. The sliding door is designed to line up with our 12W x 12H" and 12W x 14H" traps. This transfer cage measures 26L x 12W x 16H" and is constructed of 1 x 2" - 12 gauge wire mesh. This cage has a sheet metal tray bottom for animal feet comfort and it is removable for easy cleaning.

Weight: 13 lbs

Size: 26L x 12W x 16H

Wire: 1 x 2 - 12 gauge

$139⁹⁵

Select options

Trap Caddie

CODE:C1012

With a Trap Caddie, you can carry your traps and trapped animals safely, securely, and with much less effort. The trap caddie is light and durable, fits all traps and cages from 18" - 36" in length and is constructed from heavy duty brass straight link chain. The cage hooks attach to the trap with ease, no tools are necessary. The Trap Caddie evenly distributes the captured animals weight for easy carrying. The comfort handle reduces wrist fatigue and stress. Trap Caddie also allows you to carry trapped animals with your hands completely away from the animals reach. Fits all traps and cages from 18" to 36" in length.

Weight: .6 lbs

Size: Fits all traps from 18" to 36" in length

Wire: Heavy Duty Brass Straight Link Chain

$29⁹⁵

Quantity:

+ −

Add to Cart

Free shipping

CG100 - Comfort Grip Handles for Traps - 2 Pack

CODE:CG100

Model CG100. This comfort grip handle attaches easily to square trap and cage handles. Attach the grip by simply snapping the two sides together over your metal handle. This comfort grip makes carrying traps and cages with animals effortless. Each pack contains two handles.

$4⁹⁵

Quantity:

+ −

Add to Cart

Free shipping

Trap Door Prop

CODE:TRAP DOOR PROP

The trap door prop is a rod to hold the trap door open. Available in two sizes for 12" wide or smaller traps and an XL version for Dog, fox and bobcat traps. Simply open the door and slide the prop through the trap directly under it. Propping the spring loaded door open makes baiting a single door trap and releasing animals from a single door trap much easier. This tool also makes accessing the inside of the trap for any maintenance easier. This prop is also excellent at holding open large double door trap doors for easy setting while you lift the front door. This product ships for free within the USA.

$9⁹⁵

Select options

Free shipping

PTC605NC - 30x10x10 Plastic Trap Cover for model 605NC

CODE:PTC605NC

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

$39⁷⁵

Quantity:

+ −

Add to Cart

3 Chamber Transfer Cage

CODE:333

Model 333 transfer cage features three separate chambers which allows you to transport up to three animals at a time. Transporting animals in cages also allows you to keep your traps out and deployed to catch more animals. Each chamber has a removable sliding door and top of the cage lock. This cage measures 36L x 10W x 12H" and is constructed of 1/2"x1" -14 gauge wire mesh and heavy duty 1/4 inch support rods. Each section of the cage measures 12L x 10W x 12H". The section doors can also be removed completely to make larger holding areas for larger animals.

Weight: 13 lbs.

Size: 36L x 10W x 12H

Wire: 1/2 x 1 - 14 gauge

$146⁹⁵

Select options

30622 - Two Chamber Feral Cat Transfer Cage

CODE:30622

Model 30622 is a double chamber transfer cage for cats and similar size animals. It can be used to hold cats in two separate chambers or the middle deviding door can be removed to create a double long holding area when extra room is needed. This cage also features a sliding door on each end that matches up to our 10Wx12H" feral cat traps so that cats can be loaded in from either side if one is already being held in the other chamber. This cage can also be used with our C306 and C307 connector pieces to attach multiple cages and traps together for even larger holding areas. Each chamber also has a bottom tray that can be removed for...

Weight: 12 lbs

Size: 42L x 11W x 12H

Wire: 1 x 1 - 14 gauge

$139⁷⁵

Select options

306SS - 11 x 12 - Pro Series Transfer Cage

CODE:306SS

Model 306SS is our Pro Series Transfer Cage for small/medium sized animals featuring ½ x 1 – 14 gauge wire mesh. Tighter mesh protects handlers from bites and animal scratches and prevent animals from reaching outside the cage. Transfer cages have a guillotine style door. Simply release the door lock and slide the door up and out of the way to insert or remove animals. Transfer cages are designed for easy transfer of animals from live traps or cages. This transfer cage matches up nicely with the rear transfer door on all of our 10" wide traps and cages. Model 306SS measures 20L x 11W x 12H and is constructed from ½ x 1" - 14 gauge wire...

Weight: 7 lbs

Size: 20L x 11W x 12H

Wire: 1/2 x 1 - 14 gauge

$85⁰⁰

Select options

305SS - 9 x 10 - Pro Series Transfer Cage

CODE:305SS

Model 305SS is our Pro Series Transfer Cage for small animals featuring ½ x 1 – 14 gauge wire mesh. Tighter mesh protects handlers from bites and animal scratches and prevent animals from reaching outside the cage. Transfer cages have a guillotine style door. Simply release the door lock and slide the door up and out of the way to insert or remove animals. Transfer cages are designed for easy transfer of animals from live traps or cages. This transfer cage matches up nicely with the rear transfer door on all of our 9" wide traps and cages. Model 305SS measures 16L x 9W x 10H and is constructed from ½ x 1" - 14 gauge wire mesh. This cage...

Weight: 5 lbs

Size: 16L X 9W X 10H

Wire: 1/2 x 1 - 14 gauge

$75⁰⁰

Select options

307SS - 12 x 16 - Pro Series Transfer Cage

CODE:307SS

Model 307SS is our Pro Series Transfer Cage for medium/large sized animals featuring ½ x 1 – 14 gauge wire mesh. Tighter mesh protects handlers from bites and animal scratches and prevent animals from reaching outside the cage. Transfer cages have a guillotine style door. Simply release the door lock and slide the door up and out of the way to insert or remove animals. Transfer cages are designed for easy transfer of animals from live traps or cages. This transfer cage matches up nicely with the rear transfer door on all of our 12" wide traps and cages. Model 307SS measures 26L x 12W x 16H and is constructed from ½ x 1" - 14 gauge wire...

Weight: 11 lbs

Size: 26L X 12W X 16H

Wire: 1/2 x 1 - 14 gauge

$115⁰⁰

Select options

308SS - 16 X 20 - Pro Series Transfer Cage

CODE:308SS

Model 308SS is our Pro Series Transfer Cage for large animals featuring ½ x 1 – 14 gauge wire mesh. Tighter mesh protects handlers from bites and animal scratches and prevent animals from reaching outside the cage. Transfer cages have a guillotine style door. Simply release the door lock and slide the door up and out of the way to insert or remove animals. Transfer cages are designed for easy transfer of animals from live traps or cages. This transfer cage matches up nicely with the rear transfer door on all of our 16" wide traps and cages. Model 308SS measures 30L x 16W x 20H and is constructed from ½ x 1" - 14 gauge wire mesh. This cage...

Weight: 17 lbs

Size: 30L X 16W X 20H

Wire: 1/2 x 1 - 14 gauge

$143⁷⁵

Select options

309SS - 20 x 26 - Pro Series Transfer Cage

CODE:309SS

Model 309SS is our Pro Series Transfer Cage for extra-large animals featuring ½ x 1 – 14 gauge wire mesh. Tighter mesh protects handlers from bites and animal scratches and prevent animals from reaching outside the cage. Transfer cages have a guillotine style door. Simply release the door lock and slide the door up and out of the way to insert or remove animals. Transfer cages are designed for easy transfer of animals from live traps or cages. This transfer cage matches up nicely with the rear transfer door on all of our 20" wide traps and cages. Model 309SS measures 36L x 20W x 26H and is constructed from ½ x 1" - 14 gauge wire mesh....

Weight: 24 lbs

Size: 36L X 20W X 26H

Wire: 1/2 x 1 - 14 gauge

$191⁷⁵

Select options

RM306 - Feral Cat Restraint Module

CODE:RM306

Model RM306 is our newest restraint module specifically designed for easy handling of cats. Restraint modules are essential tools when absolute control of an animal is required. Our restraint modules feature sliding doors at both ends of the cage which eliminates the need to turn animals around or back animals out when done. This restraint module measures 20L x 11W x 12H" and is constructed from 1 x 1" - 14 gauge wire mesh. The module features an internal panel used to gently push your cat against the opposite side of the cage. The panel arms features notches that can lock into place by sliding them down onto the cage wire. This locking...

Weight: 12 lbs

Size: 21L x 11W x 12H

Wire: 1 x 1 - 14 gauge

$170⁰⁰

Select options

Clip on Water or Feed Bowl - 1 Cup

CODE:WC33

These hanging cage cups for pigeons, birds, and other animals have a Unique shift locking design so they can be easily clipped into wire mesh traps and cages. This keeps more active animals from knocking them off the wire. They are made in the USA from HDPE (high-density polyethylene) which makes them durable and gnaw resistant. Containers are both boil & freeze resistant for strength and sanitation. They are a thicker, more flexible plastic, and consequently are not prone to freeze and burst like most imported cage cups. The advantages to the hanging cage cups is they stay cleaner because caged birds and animals aren't as prone to...

$5²⁵

Quantity:

+ −

Add to Cart

Free shipping

Skyhawk Kiwi Remote Trap Monitoring System

CODE:SK100

The Skyhawk Kiwi is a rugged, easy-to-setup remote monitoring device powered by revolutionary cellular technology. The Kiwi is designed to work with any style of trap and can be quickly set up to function with both motion detection and the trap door shutting closed. Stop wasting time and money traveling to and from sites; know exactly when activity occurs in your trap(s), with real-time notifications sent right to your smart device. Key Features LTE Cellular Connected Unlike other devices currently available that use Wi-Fi and Bluetooth, Skyhawk products are connected using revolutionary new cellular technology that...

$99⁰⁰

Select options

Free shipping

Skyhawk Kiwi Bundle - Remote Trap Monitoring System with Protective Sleeve

CODE:SK102B

The Skyhawk Kiwi is a rugged, easy-to-setup remote monitoring device powered by revolutionary cellular technology. The Kiwi is designed to work with any style of trap and can be quickly set up to function with both motion detection and the trap door shutting closed. Stop wasting time and money traveling to and from sites; know exactly when activity occurs in your trap(s), with real-time notifications sent right to your smart device. Key Features LTE Cellular Connected Unlike other devices currently available that use Wi-Fi and Bluetooth, Skyhawk products are connected using revolutionary new cellular technology that...

$113⁹⁹

Quantity:

+ −

Add to Cart

Feral Cat Series Shade Panel / Hand Guard Extension

CODE:SP-CATS

Shade panels provide shade for your trapped cats at an affordable price. Not only do they provide shade, they also keep bait protected from the elements. And they act as an extended hand guard protecting against animals reaching thru the mesh and scratching you. Shade panels are made from corrugated UV protected plastic. There is a brass grommet at each corner to allow shade panels to be zip tied to the top of traps. There is also a convenient cutout in the shade panel for trap handles to fit thru. Model SP-CATS will fit trap models GT606, 605NC, 606NC, 608NC, 608FN, 206NC, 108, and 608. ...

$12⁹⁵

Quantity:

+ −

Add to Cart

Free shipping

Trap Handle Cushion

CODE:THC-1

Trap Handle Cushions are made of neoprene and have a sewn on velcro strap to attach over a handle or set of handles. Available in Green or Black. Free shipping for this item within the U.S.A via USPS standard post or with other items ordered.

$7⁵⁰

Select options

Free shipping

10 Pack - Trap Handle Cushion

CODE:THC-1GorBX10

Trap Handle Cushions are made of neoprene and have a sewn on velcro strap to attach over a handle or set of handles. Available in Green or Black. Free shipping for this item within the U.S.A via USPS standard post or with other items ordered.

$50⁰⁰

Select options

NC1212 - "See Through" Clear Rear Sliding Door for Model GT608

CODE:NC1212

Model NC1212 is the Neighborhood Cats “See Through" Rear Release Door. Designed to fool the smartest and most trap shy cats. The clear acrylic rear release door allows cats to see completely through the trap and gives them confidence to enter the trap believing they can walk through. Best if used in a natural funnel setting so the cat comes in the direction of the open trap door. NC1212 is designed to fit trap model GT608 Neighborhood Cats Trap with Gravity Door.

Weight: .5 LB

Size: 11-1/2" x 11-1/2"

Wire: .177” Clear Acrylic

$29⁵⁰

Quantity:

+ −

Add to Cart

Free shipping

Auto-Latch Release Door

CODE:RDL

Release Door with Auto Latch for Traps and Cages. This easy release rear door does not require a locking clip or carabiner. To lock the door simply push down on the door until it shuts and it will automatically lock in place. To remove the door, pull the latch back and lift up on the door.

$24⁹⁵

Select options

G911-PRO - Pro Series Gravity Door Trap

CODE:G911-PRO

Model G911-PRO is our Professional Series rigid gravity trap for feral cats, raccoons, woodchucks, and similar sized animals. When an animal steps on the trip plate, the front door drops by using gravity - no springs are involved. Unlike other gravity traps on the market, the front door locks automatically! No chance of the door opening if the trap accidentally rolls over. And, unlike other brands, you don't need three hands to set the trap - just lift the single rod connecting the front door rings with one hand and lift the door with the other. This trap features a very strong frame consisting of a...

Weight: 10.4 lbs.

Size: 30L x 9W x 11H

Wire: 1/2 x 1 - 14 gauge

$109⁷⁵

Select options

PTC109 - 42x15x15 Plastic Trap Cover for Model 109

CODE:PTC109

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

$57⁰⁰

Quantity:

+ −

Add to Cart

PTC602SS-F - 19x5x5 Plastic Trap Cover for Model 602SS-F

CODE:PTC602SS-F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 1 Lbs.

Size: 19x5x5

Wire: UV Treated Polyethylene

$22⁵⁰

Quantity:

+ −

Add to Cart

PTC102SS-F - 19x5x5 Plastic Trap Cover for Model 102SS-F

CODE:PTC102SS-F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 1 Lbs.

Size: 19x5x5"

Wire: UV Treated Polyethylene

$22⁵⁰

Quantity:

+ −

Add to Cart

PTC103SS-F - 19x6x6 Plastic Trap Cover for Model 103SS-F

CODE:PTC103SS-F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 19x6x6

Wire: UV Treated Polyethylene

$25⁵⁰

Quantity:

+ −

Add to Cart

PTC603SS-F - 19x6x6 Plastic Trap Cover for Model 603SS-F

CODE:PTC603SS-F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 19x6x6"

Wire: UV Treated Polyethylene

$25⁵⁰

Quantity:

+ −

Add to Cart

PTC605SS-F - 26x7x7 Plastic Trap Cover for Model 605SS-F

CODE:PTC605SS-F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 26x7x7"

Wire: UV Treated Polyethylene

$28²⁰

Quantity:

+ −

Add to Cart

PTC105SS-F - 26x7x7 Plastic Trap Cover for Model 105SS-F

CODE:PTC105SS-F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 26x7x7"

Wire: UV Treated Polyethylene

$28²⁰

Quantity:

+ −

Add to Cart

PTCC7732 - 32x7x7 Plastic Trap Cover for Model C7732

CODE:PTCC7732

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 32x7x7"

Wire: UV Treated Polyethylene

$28²⁰

Quantity:

+ −

Add to Cart

PTC606SS-F - 30x9x9" Plastic Trap Cover for Model 606SS-F

CODE:PTC606SS-F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 30x9x9"

Wire: UV Treated Polyethylene

$35⁴⁰

Quantity:

+ −

Add to Cart

PTC6010 - 30x10x10 Plastic Trap Cover for Model 6010

CODE:PTC6010

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 30x10x10"

Wire: UV Treated Polyethylene

$39⁷⁵

Quantity:

+ −

Add to Cart

PTC1010F - 36x10x10 Plastic Trap Cover for Model 1010F

CODE:PTC1010F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 36x10x10"

Wire: UV Treated Polyethylene

$39⁷⁵

Quantity:

+ −

Add to Cart

PTC1010SS - 30x10x10 Plastic Trap Cover for Model 1010SS

CODE:PTC1010SS

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

$39⁷⁵

Quantity:

+ −

Add to Cart

PTC6010F - 36x10x10 Plastic Trap Cover for Model 6010F

CODE:PTC6010F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 3

Size: 36x10x10"

Wire: UV Treated Polyethylene

$39⁷⁵

Quantity:

+ −

Add to Cart

PTC6010SS - 30x10x10 Plastic Trap Cover for Model 6010SS

CODE:PTC6010SS

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 30x10x10"

Wire: UV Treated Polyethylene

$39⁷⁵

Quantity:

+ −

Add to Cart

PTC1010SS-F - 32x10x10 Plastic Trap Cover for Model 1010SS-F

CODE:PTC1010SS-F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 32x10x10"

Wire: UV Treated Polyethylene

$39⁷⁵

Quantity:

+ −

Add to Cart

PTC6010SS-F - 32x10x10 Plastic Trap Cover for Model 6010SS-F

CODE:PTC6010SS-F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 32x10x10"

Wire: UV Treated Polyethylene

$39⁷⁵

Quantity:

+ −

Add to Cart

Free shipping

6 Spring Clips

CODE:PDTSP X6

These spring clips can be used for attaching cages together, holding panels shut or attaching accessories. They are also used on our model DT1 drop trap for attaching the top of the trap when it is set up. Part code PDTSP - spring clip.

$20⁰⁰

Quantity:

+ −

Add to Cart

Free shipping

One Dozen Spring Clips (12)

CODE:PDTSP X12

These spring clips can be used for attaching cages together, holding panels shut or attaching accessories. They are also on our model DT1 drop trap for attaching the top of the trap when it is set up. These spring clips can be attached easily by crimping the end with a pliers. Part code PDTSP - spring clip.

$30⁰⁰

Quantity:

+ −

Add to Cart

PTC110A - 48L x 20W x 26H Plastic Trap Cover for Model 110A Dog Trap

CODE:PTC110A

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 10

Size: 48L x 20W x 26H

Wire: UV Treated Polyethylene

$99⁷⁵

Quantity:

+ −

Add to Cart

PTC610B - 48L x 20W x 26H Plastic Trap Cover for Model 610B Dog Trap

CODE:PTC610B

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage. This trap cover only covers the back 4' of the...

Weight: 10 LBS

Size: 48L x 20W x 26H

Wire: UV Treated Polyethylene

$99⁷⁵

Quantity:

+ −

Add to Cart

PTC610A - 48L x 20W x 26H Plastic Trap Cover for Model 610A Dog Trap

CODE:PTC610A

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 10 LBS

Size: 48L x 20W x 26H

Wire: UV Treated Polyethylene

$99⁷⁵

Quantity:

+ −

Add to Cart

PTC110B - 48L x 20W x 26H Plastic Trap Cover for Model 610B Dog Trap CODE: PTC110B

CODE:PTC110B

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage. This trap cover only covers the back 4' of the...

Weight: 10 LBS

Size: 48L x 20W x 26H

Wire: UV Treated Polyethylene

$99⁷⁵

Quantity:

+ −

Add to Cart

PTC610C - 48L x 20W x 26H Plastic Trap Cover for Model 610C Dog Trap

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage. This trap cover only covers the back 4' of the...

Weight: 10 LBS

Size: 48L x 20W x 26H

Wire: UV Treated Polyethylene

$99⁷⁵

Quantity:

+ −

Add to Cart

PTC110C - 48L x 20W x 26H Plastic Trap Cover for Model 110C Dog Trap

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage. This trap cover only covers the back 4' of the...

Weight: 10 LBS

Size: 48L x 20W x 26H

Wire: UV Treated Polyethylene

$99⁷⁵

Quantity:

+ −

Add to Cart

PTC109SS-F - 42x12x12 Plastic Trap Cover for Model 109SS-F

CODE:PTC109SS-F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 5 LBS

Size: 42x12x12"

Wire: UV Treated Polyethylene

$49⁸⁰

Quantity:

+ −

Add to Cart

PTC609SS-F - 42x12x12 Plastic Trap Cover for Model 609SS-F

CODE:PTC609SS-F

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 5 LBS

Size: 42x12x12"

Wire: UV Treated Polyethylene

$49⁸⁰

Quantity:

+ −

Add to Cart

PTC209.5 - 42x15x20 Plastic Trap Cover for Model 209.5

CODE:PTC209.5

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 5 Lbs

Size: 42x15x20

Wire: High Density Green Polyethelene with WeatherGuard.

$57⁰⁰

Quantity:

+ −

Add to Cart

PTC109.5 - 42x15x20 Plastic Trap Cover for Model 109.5

CODE:PTC109.5

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 5 LBS

Size: 42x15x20

Wire: High Density Green Polyethelene with WeatherGuard.

$57⁰⁰

Quantity:

+ −

Add to Cart

PTC609.5 - 42x15x20 Plastic Trap Cover for Model 109.5

CODE:PTC609.5

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 5 LBS

Size: 42x15x20

Wire: High Density Green Polyethelene with WeatherGuard.

$57⁰⁰

Quantity:

+ −

Add to Cart

PTCG911-PRO - 30x9x11 Plastic Trap Cover for Model G911-PRO

CODE:PTCG911-PRO

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 4 Lbs

Size: 30L x 9W x 11H

Wire: High Density Green Polyethelene with WeatherGuard.

$39⁷⁵

Quantity:

+ −

Add to Cart

PTCG911S-PRO - 30x9x11 Plastic Trap Cover for Model G911S-PRO

CODE:PTCG911S-PRO

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 4 Lbs

Size: 30L x 9W x 11H

Wire: High Density Green Polyethelene with WeatherGuard.

$39⁷⁵

Quantity:

+ −

Add to Cart

C306GT - Connector for GT606 Trap to 306NC Cage

CODE:C306GT

PLEASE NOTE: THIS ACCESSORY WILL ONLY WORK WITH GT606 TRAPS MANUFACTURED AFTER12/10/2023. If your GT606 has a rear sliding door that is recessed into the trap it will not work because it cannot slide down through the channels from the the top of the trap. If your GT606 has a rear sliding door that is at the far back of the trap it will work with your trap. Model C306GT is a revolutionary accessory designed to make feral cat care as stress free as possible. This accessory slides into the rear door slides of a 306NC transfer cage and GT606 cat trap allowing you to use your transfer cage as a litter box cage. Coupled...

Wire: 1/2 x 1 - 14G Galvanized Wire Mesh

$44⁷⁵

Quantity:

+ −

Add to Cart

PTCGT1012- 30L x 10W x 12H Plastic Trap Cover for Model GT1012

CODE:PTCGT1012

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 4 Lbs

Size: 30L x 10W x 12H

Wire: High Density Green Polyethelene with WeatherGuard.

$49⁸⁰

Quantity:

+ −

Add to Cart

Free shipping

TMGT1012 - The Trap Mat by Neighborhood Cats For Model GT1012 - Free Shipping Product

CODE:TMGT1012

Introducing the Neighborhood Cats heavy duty trap mats, field tested and endorsed by the Neighborhood Cats organization. Sometimes cats are reluctant to enter a trap because they don't like the feel of the wire mesh floor. A trap mat, which covers the floor of the trap from the front to the end of the trip plate, solves the problem! Plus you can use it to create a trail of bait leading into the trap – just rub a piece of bait along the length of the mat. No more clothes pins and flapping newspaper. These durable rubber mats are made from abrasion-resistant SBR/PVC, are waterproof, lie flat in windy conditions and can be quickly cleaned...

$22⁷⁵

Quantity:

+ −

Add to Cart

Kitten Trap Divider

CODE:TD06

Model TD06 - Standard trap divider for all 7'' wide smaller traps and cages. This divider measures 6" wide and 14" tall. Trap dividers can be used to section off part of a trap or cage, gently push trapped animals into transfer cages and allow for easier release from traps without rear sliding doors.

Weight: 2 lbs

Size: 6W x 14H

Wire: .192 gauge

$20⁵⁰

Select options

Free shipping

TMKT66 - The Trap Mat by Neighborhood Cats For Model KT66 - Free Shipping Product

CODE:TMKT66

Introducing the Neighborhood Cats heavy duty trap mats, field tested and endorsed by the Neighborhood Cats organization. Sometimes cats are reluctant to enter a trap because they don't like the feel of the wire mesh floor. A trap mat, which covers the floor of the trap from the front of the trap to the back of the trip plate, solves the problem! Plus you can use it to create a trail of bait leading into the trap – just rub a piece of bait along the length of the mat. No more clothes pins and flapping newspaper. These durable mats are made from abrasion-resistant SBR/PVC, are waterproof, lie flat in windy conditions and can be quickly...

$17⁵⁰

Select options

PTCKT66 - 24x6x6 Plastic Trap Cover for Model KT66 - Kitten Trap

CODE:PTCKT66

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 2 Lbs

Size: 24L x 6 x 6"

Wire: High Density Green Polyethelene with WeatherGuard.

$25⁵⁰

Quantity:

+ −

Add to Cart

PTCAS36 - 36x10x12 Plastic Trap Cover for Model AS36

CODE:PTCAS36

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 4 Lbs

Size: 36L x 10W x 12H

Wire: High Density Green Polyethelene with WeatherGuard.

$42⁶⁰

Quantity:

+ −

Add to Cart

Feral Cat Recovery Cage

CODE:RC2436

Model RC2436 is our cat recovery cage. It provides plenty of space for cats to recover following surgery. One end of the cage is completely removeable with a sliding style door. This allows for the optional pan taken in and out of the cage for easy clean up. The other end of the cage features an easy release door that allows cats to be easily transferred from a trap or cage into the recovery cage. The easy release door also allows handlers to place food and water into the cage. It also features an access door on top of the cage to allow for easy clean up between cat visits. An optional sheet metal pan...

Weight: 15 lbs

Size: 36L x 24W x 12H

Wire: 1 x 1 - 14 gauge

$175⁰⁰

Select options

Free shipping

Pair of Spring Clips

CODE:PDTSP X2

These spring clips can be used for attaching cages together, holding panels shut or attaching accessories. They are also on our model DT1 drop trap for attaching the top of the trap when it is set up. These spring clips can be attached easily by crimping the end with a pliers. Part code PDTSP - spring clip.

$10⁰⁰

Quantity:

+ −

Add to Cart

RC100 - Remote Control Trap Trigger

CODE:RC100

Model RC100 is a remote control trap trigger that allows you to trigger your trap remotely with a hand held remote trigger. This device allows you to target specific animals and shut the trap door exactly when you want it shut from up 200+ feet away! The hand held unit contains a rechargeable lithium ion battery and comes with one USB cord for charging from a computer or USB wall mount charger. The receiver unit contains four AA batteries.

$149⁷⁵

Quantity:

+ −

Add to Cart

14x4x4 - Mounting Cone

CODE:SC30

Mounting cones allow you to attach traps or one way doors over animal entry points that are under soffits, on rooftops, against walls or even staked into the ground over den openings. Not only does a mounting cone hold the trap in place but it also creates a directional funnel from the entry point directly into your trap. Mounting cones have 1" flaps on each side which allow them to be easily attached to surfaces with mounting screws, nails or heavy duty staples. This cone measures 14" L x 4" W x 4" H.

Weight: 1 lbs

Size: 14L x 4W x 4H

Wire: 1/2 x 1 - 14 GA

$20⁸⁰

Select options

14x5x5 - Mounting Cone

CODE:SC40

Mounting cones allow you to attach traps or one way doors over animal entry points that are under soffits, on rooftops, against walls or even staked into the ground over den openings. Not only does a mounting cone hold the trap in place but it also creates a directional funnel from the entry point directly into your trap. Mounting cones have 1" flaps on each side which allow them to be easily attached to surfaces with mounting screws, nails or heavy duty staples. This cone measures 14" L x 5" W x 5" H.

Weight: 2 lbs

Size: 14L x 5W x 5H

Wire: 1/2 x 1 - 14 GA

$22²⁵

Select options

PTC102.5SS - 24x5x5 Plastic Trap Cover for Model 102.5SS

CODE:PTC102.5SS

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 1 Lbs.

Size: 24x5x5"

Wire: UV Treated Polyethylene

$22⁵⁰

Quantity:

+ −

Add to Cart

Divider for 7" Wide and Smaller Traps

CODE:TD06

Model TD06 - Standard trap divider for all 7'' wide smaller traps and cages. This divider measures 6" wide and 14" tall. Trap dividers can be used to section off part of a trap or cage, gently push trapped animals into transfer cages and allow for easier release from traps without rear sliding doors.

Weight: 2 lbs

Size: 8W x 14H

Wire: .192 gauge

$20⁵⁰

Select options

14x6x6 - Mounting Cone

CODE:SC50

Mounting cones allow you to attach traps or one way doors over animal entry points that are under soffits, on rooftops, against walls or even staked into the ground over den openings. Not only does a mounting cone hold the trap in place but it also creates a directional funnel from the entry point directly into your trap. Mounting cones have 1" flaps on each side which allow them to be easily attached to surfaces with mounting screws, nails or heavy duty staples. This cone measures 14" L x 6" W x 6" H.

Weight: 3 lbs

Size: 14L x 6W x 6H

Wire: 1/2 x 1 - 14 GA

$23⁵⁰

Select options

20x7x7 - Mounting Cone

CODE:SC60

Mounting cones allow you to attach traps or one way doors over animal entry points that are under soffits, on rooftops, against walls or even staked into the ground over den openings. Not only does a mounting cone hold the trap in place but it also creates a directional funnel from the entry point directly into your trap. Mounting cones have 1" flaps on each side which allow them to be easily attached to surfaces with mounting screws, nails or heavy duty staples. This cone measures 12" L x 4" W x 4" H.

Weight: 4 lbs

Size: 20L x 7w x 7H

Wire: 1 x 1 - 14 Gauge

$25⁹⁵

Select options

PTC104SS - 26x6x6 Plastic Trap Cover for Model 104SS

CODE:PTC104SS

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 1 Lbs.

Size: 26x6x6"

Wire: UV Treated Polyethylene

$25⁵⁰

Quantity:

+ −

Add to Cart

20x8x8 - Mounting Cone

CODE:SC70

Mounting cones allow you to attach traps or one way doors over animal entry points that are under soffits, on rooftops, against walls or even staked into the ground over den openings. Not only does a mounting cone hold the trap in place but it also creates a directional funnel from the entry point directly into your trap. Mounting cones have 1" flaps on each side which allow them to be easily attached to surfaces with mounting screws, nails or heavy duty staples. This cone measures 20" L x 8" W x 8" H.

Weight: 4 lbs

Size: 20L x 8W x 8H

Wire: 1 x 1 - 14 Gauge

$28²⁵

Select options

20x9x9 - Mounting Cone

CODE:SC80

Mounting cones allow you to attach traps or one way doors over animal entry points that are under soffits, on rooftops, against walls or even staked into the ground over den openings. Not only does a mounting cone hold the trap in place but it also creates a directional funnel from the entry point directly into your trap. Mounting cones have 1" flaps on each side which allow them to be easily attached to surfaces with mounting screws, nails or heavy duty staples. This cone measures 20" L x 9" W x 9" H to be used with 8x8 traps or one way doors.

Weight: 4 lbs

Size: 20L x 8W x 8H

Wire: 1 x 1 - 14 Gauge

$32⁵⁰

Select options

HD Divider for 9" Wide and Smaller Traps and Cages

CODE:TD09H

Model TD09H is our heavy duty trap divider for all 9'' wide or smaller traps and cages. This divider measures 8" wide and 14" tall and is made of heavy duty 1/4" thick galvanized steel rod. Trap dividers can be used to section off part of a trap or cage, gently push trapped animals into transfer cages and allow for easier release from traps without rear sliding doors.

Weight: 2 lbs

Size: 8W x 14H

Wire: .192 gauge

$23⁵⁰

Select options

BBD22 - Enclosed Small Hanging Bait Basket with Door - 2" x 2"

CODE:BBD22

Bait baskets are designed to hang from inside the trap and are suspended up off the ground. This allows the scent of your bait to travel further and gives your target animals a visual to draw them in. It also makes it more difficult for critters to reach through the trap and steal your bait. This completely enclosed bait basket with door measures 2"x2"x2" and features ½" x ½" – 16GA galvanized steel mesh. It also has and hanging hook to make installation and removal very simple.

Weight: .5 lb

Size: 2x2x2

Wire: 1/2 x 1/2 - 16 gauge

$16⁵⁰

Select options

Divider for 9" Wide and Smaller Traps & Cages

CODE:TD09

Model TD09 - Standard trap divider for all 9'' wide smaller traps and cages. This divider measures 8" wide and 14" tall. Trap dividers can be used to section off part of a trap or cage, gently push trapped animals into transfer cages and allow for easier release from traps without rear sliding doors.

Weight: 2 lbs

Size: 8W x 14H

Wire: .192 gauge

$20⁵⁰

Select options

305 - Transfer Cage - Rabbit/Opossum Size

CODE:305

Model 305 is a transfer cage for rabbits, opossums and similar size animals. One end of this cage is a sliding door designed for easy transfer of animals from live traps. This transfer cage matches up nicely with all 9x9" trap rear sliding doors. This transfer cage measures 16L x 9W x 10H" and is constructed of 1 x 1" - 14 gauge wire mesh. This cage has a sheet metal tray bottom for animal feet comfort and it is removable for easy cleaning.

Weight: 5 lbs

Size: 16L x 9W x 10H

Wire: 1 x 1 - 14 gauge

$69⁹⁵

Select options

HD Divider for 10" Traps and Smaller Traps and Cages

CODE:TD10H

Model TD10H is our heavy duty trap divider for all 10'' traps and smaller traps and cages. This divider measures 9" wide and 18" tall. Trap dividers can be used to section off part of a trap or cage, gently push trapped animals into transfer cages and allow for easier release from traps without rear sliding doors.

Weight: 3 lbs

Size: 9W x 18H

Wire: .250" Steel Rod

$24⁷⁵

Select options

N35 - Nose Cone for all 3.5" x 3.5" Traps

CODE:N35

Nose cones are used as an extension of a trap to guide animals directly from a burrow or den opening into the trap. Nose cones work great for animals that burrow underground. Set the nose cone opening directly over the burrow, when the critter exits, he will pass through the bottom opening of the nose cone and be forced directly into the trap making the set nearly fool-proof. This nose cone measures 7L x 4W x 4H" fits trap model M35 and all other 3.5W" x 3.5H" trap or excluder models.

Weight: 1 lbs

Size: 7L x 4W x 4H

Wire: 1/2 x 1 - 16 gauge

$18⁷⁵

Select options

SC30 - 14x4x4" Soffit Cone

CODE:SC30

SC30 - Soffit cones allow you exclude or trap critters from den openings in soffits or other overhead surfaces. Soffit cones have 1" flaps on each side which allow them to be easily attached. Once the soffit cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. These cones can also be used on vertical walls over animal entry points or even spiked into the ground over animal den openings. This cone measures 14"x 4"x 4" and is used with 3" x 3" or 3.5" x 3.5" traps or excluders.

Weight: 1 lb

Size: 14Lx4Wx4H

Wire: 1/2 x 1 - 14 gauge

$22²⁵

Select options

CC30 - 14x4x4" Inside Corner Cone

CODE:CC30

CC30 - Corner cones allow you exclude or trap critters from den openings on inside 90 degree corners of structures. Corner cones have two wing flaps which allow them to be easily attached. Once the corner cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. This cone measures 14" x 4" x 4" and is used with 3" x 3" or 3.5" x 3.5" traps or excluders.

Weight: 1 lb

Size: 14Lx4Wx4H

Wire: 1/2 x 1 - 14 gauge

$34⁰⁰

Select options

PTC105.5SS - 30x7x7 Plastic Trap Cover for Model 105.5SS

CODE:PTC105.5SS

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

$28²⁰

Quantity:

+ −

Add to Cart

BB22 - Small Hanging Bait Basket - 2" x 2"

CODE:BB22

Model BB22 is a small bait basket to hang in the back of a trap. This bait box measures 2" x 2" x 2" with an open top and chain to hang from the trap. The bait basket suspends bait off the ground allowing the scent of bait to travel farther and give your target animal a view of the bait from a distance. The basket also makes it more difficult for the animal to steal bait both outside and inside the trap.

Weight: .5 lb

Size: 2 x 2 x 2

Wire: 1/2 x 1/2 - 16 gauge

$14⁵⁰

Select options

CN50 - Collapsible Nose Cone for 5x5 Traps

CODE:CN50

Model CN50 is a collapsible nose cone designed to fit 5"W x 5"H traps. This nose cone features prongs along the bottom edge which can be pressed firmly into the ground to insure it will stay in position. The diversity of this unique cone allows you to lift any one of the 3 flaps so it can be mounted against any vertical surface to direct animals into your trap as they exit their dens. You can also leave all flaps down and press the nose cone into position over a den opening in the ground. And for those with limited space in your service vehicles, the best feature is this nose cone can be folded flat in seconds taking virtually no storage...

Weight: 1 lb

Size: 9L x 5.5W x 6H

Wire: 1/2 x 1 - 14ga

$29⁹⁵

Select options

24x10x10 - Mounting Cone

CODE:SC90

Mounting cones allow you to attach traps or one way doors over animal entry points that are under soffits, on rooftops, against walls or even staked into the ground over den openings. Not only does a mounting cone hold the trap in place but it also creates a directional funnel from the entry point directly into your trap. Mounting cones have 1" flaps on each side which allow them to be easily attached to surfaces with mounting screws, nails or heavy duty staples. This cone measures 24" L x 10" W x 10" H.

Weight: 6 lbs

Size: 24L x 10W x `10H

Wire: 1 x 1 - 14 Gauge

$37⁵⁰

Select options

Food Tray Kit for Pigeon Traps

CODE:PCF668

Food container accessory designed to fit any pigeon or bird trap or carrier that is 8" high or higher. Comes complete with 6 x 6 x 8" high wire mesh housing designed to keep food tray clean. Sheet metal food tray is included and measures 5 x 5 x 2". Model PCF668.

$30⁰⁰

Quantity:

+ −

Add to Cart

Drop Trap Transfer Opening Reducer

CODE:DT-DOR

DT-DOR reduces the opening size of our drop trap release door from 12W x 14H down to 8W x 10H. This handy accessory allows almost any model trap from any manufacturer to be used with our DT1 and DT2 drop traps for transferring trapped cats out of the drop trap. In just a few seconds, with no tools required, simply slide DT-DOR behind the sheet metal door tracks on the drop trap and your drop trap will accommodate smaller traps and cages for cat transfers. Zip ties are included and required to secure the door reducer to the trap.

$14⁹⁵

Select options

24x11x11 - Mounting Cone

CODE:SC100

Mounting cones allow you to attach traps or one way doors over animal entry points that are under soffits, on rooftops, against walls or even staked into the ground over den openings. Not only does a mounting cone hold the trap in place but it also creates a directional funnel from the entry point directly into your trap. Mounting cones have 1" flaps on each side which allow them to be easily attached to surfaces with mounting screws, nails or heavy duty staples. This cone measures 24" L x 11" W x 11" H.

$34⁵⁰

Select options

26x13x13 - Mounting Cone

CODE:SC120

Mounting cones allow you to attach traps or one way doors over animal entry points that are under soffits, on rooftops, against walls or even staked into the ground over den openings. Not only does a mounting cone hold the trap in place but it also creates a directional funnel from the entry point directly into your trap. Mounting cones have 1" flaps on each side which allow them to be easily attached to surfaces with mounting screws, nails or heavy duty staples. This cone measures 26" L x 13" W x 13" H.

Weight: 7 lbs

Size: 26L x 13W x 13H

Wire: 1 x 2 - 12 Gauge

$33²⁰

Select options

NC0909 - "See Through" - Clear Rear Sliding Door For Model 606 and 606.3

CODE:NC0909

Model NC0909 is the Neighborhood Cats “See Through" Rear Release Door. Designed to fool the smartest and most trap shy cats. The clear acrylic rear release door allows cats to see completely through the trap and gives them confidence to enter the trap believing they can walk through. Best if used in a natural funnel setting so the cat comes in the direction of the open trap door. NC0909 is designed to fit trap 606, 606.3 and other 9" wide x 9" tall traps with rear sliding door.

$29⁵⁰

Quantity:

+ −

Add to Cart

NC0911 - "See Through" - Clear Rear Sliding Door For Model GT606

CODE:NC0911

Model NC0911 is the Neighborhood Cats “See Through" Rear Release Door. Designed to fool the smartest and most trap shy cats. The clear acrylic rear release door allows cats to see completely through the trap and gives them confidence to enter the trap believing they can walk through. Best if used in a natural funnel setting so the cat comes in the direction of the open trap door. NC0911 is designed to fit trap model GT606 Neighborhood Cats Trap with Gravity Door.

Weight: .5 lb

Size: 8-7/8 x 11-1/2"

Wire: .177” Clear Acrylic

$29⁵⁰

Quantity:

+ −

Add to Cart

NC1010 - "See Through" - Clear Rear Sliding Door For Model 605NC

CODE:NC1010

Model NC1010 is the Neighborhood Cats “See Through" Rear Release Door. Designed to fool the smartest and most trap shy cats. The clear acrylic rear release door allows cats to see completely through the trap and gives them confidence to enter the trap believing they can walk through. Best if used in a natural funnel setting so the cat comes in the direction of the open trap door. NC1010 is designed to fit trap 605NC and other 10" wide by 10" tall traps with rear sliding door.

$29⁵⁰

Quantity:

+ −

Add to Cart

TW102 - Trap Wrap For All 5" x 5" Traps

CODE:TW102

Trap Wraps are constructed from a medium weight UV stabilized plastic which makes them durable, waterproof, and washable. They are easy to install and require No Tools for installment. They have been extensively field tested and proven to reduce animal stress and injuries. Likewise they will protect animals from wind, rain, sun, and other elements. They also provide the captured animal concealment from people who may become alarmed. Trap Wraps are very affordable and we strongly recommend attaching them to all of your traps.

Weight: 1 lbs

Size: 14L x 5W x 4H

Wire: UV Stabilized Plastic

$22⁵⁰

Quantity:

+ −

Add to Cart

NC1012 - "See Through" - Clear Rear Sliding Door For 10"x12" Cat Traps

CODE:NC1012

Model NC1012 is the Neighborhood Cats “See Through" Rear Release Door. Designed to fool the smartest and most trap shy cats. The clear acrylic rear release door allows cats to see completely through the trap and gives them confidence to enter the trap believing they can walk through. Best if used in a natural funnel setting so the cat comes in the direction of the open trap door. NC1012 is designed to fit trap models 606NC, 608NC, and 608FN. This accessory measures 9-7/8"W x 12-1/2"H.

Weight: .5 lb

Size: 9-7/8"W x 12-1/2"H

Wire: .177” Clear Acrylic

$29⁵⁰

Quantity:

+ −

Add to Cart

NC0812 - "See Through" - Clear Rear Sliding Door For Model 206NC Collapsible Feral Cat Series Trap

CODE:NC0812

Model NC0812 is the Neighborhood Cats "See Through" Rear Release Door to fit model 206NC collapsible trap. Designed to fool the smartest and most trap shy cats. The clear acrylic rear release door allows cats to see completely through the trap and gives them confidence to enter believing they can walk through. Best if used in a natural funnel setting so the cat comes in the direction of the open trap door. This item will only work on models 206NC the Neighborhood Cats Collapsible Trap.

$29⁵⁰

Quantity:

+ −

Add to Cart

NC1214 - "See Through" - Clear Rear Sliding Door For 12" X 14"" Cat Traps

CODE:NC1214

Model NC1214 is the Neighborhood Cats “See Through" Rear Release Door. Designed to fool the smartest and most trap shy cats. The clear acrylic rear release door allows cats to see completely through the trap and gives them confidence to enter the trap believing they can walk through. Best if used in a natural funnel setting so the cat comes in the direction of the open trap door. NC1214 is designed to fit trap model 609.

$29⁵⁰

Quantity:

+ −

Add to Cart

BBD23 - Enclosed Medium Hanging Bait Basket with Door- 2.5" x 3"

CODE:BBD23

Bait baskets are designed to hang from inside the trap and are suspended up off the ground. This allows the scent of your bait to travel further and gives your target animals a visual to draw them in. It also makes it more difficult for critters to reach through the trap and steal your bait. This completely enclosed bait basket with door features ½" x ½" – 16GA galvanized steel mesh. It also has and hanging hook to make installation and removal very simple.

Weight: .75 lb

Size: 2.5 x 3

Wire: 1/2 x 1/2 - 16 gauge

$18⁵⁰

Select options

Divider For 10" Traps and Smaller Traps & Cages

CODE:TD10

TD10 - Standard trap divider for all 10'' and smaller traps and cages. This divider measures 9" wide and 18" tall. Trap dividers can be used to section off part of a trap or cage, gently push trapped animals into transfer cages and allow for easier release from traps without rear sliding doors.

Weight: 2 lbs

Size: 9W x 18H

Wire: .192 gauge

$22⁵⁰

Select options

306 - Transfer Cage - Raccoon/Cat Size

CODE:306

Model 306 is a sliding door cage for raccons, cats and similar size animals. One end of this cage is a sliding door designed for easy transfer of animals from live traps. This transfer cage matches up nicely with the rear transfer door on all of our 10W x 12H" traps. This transfer cage measures 20L x 11W x 10H" and is constructed of 1 x 1" - 12 gauge wire mesh. This cage has a plastic tray bottom for animal feet comfort and it is removable for easy cleaning.

Weight: 7 lbs

Size: 20L x 11W x 12H

Wire: 1 x 1 - 12 gauge

$79⁹⁵

Select options

HD Divider for 12" Wide and Smaller Traps & Cages

CODE:TD12H

Model TD12H is our heavy duty trap divider for all 12'' wide and smaller traps and cages. This divider measures 11" wide and 18" tall. Trap dividers can be used to section off part of a trap or cage, gently push trapped animals into transfer cages and allow for easier release from traps without rear sliding doors.

Weight: 4 lbs

Size: 11W x 18H

Wire: .250" Steel Rod

$26⁵⁰

Select options

N40 - Nose Cone for All 4" x 4" Traps

CODE:N40

Nose cones are used as an extension of a trap to guide animals directly from a burrow or den opening into the trap. Nose cones work great for animals that burrow underground. Set the nose cone opening directly over the burrow, when the critter exits, he will pass through the bottom opening of the nose cone and be forced directly into the trap making the set nearly fool-proof. This nose cone fits model M40 and all other 4W x 4H" trap models and excluders.

Weight: 1 lbs

Size: 7L x 4.5W x 4.5L

Wire: 1/2 x 1 - 16 gauge

$18⁷⁵

Select options

TW103 - Trap Wrap For All 6" x 6" Traps

CODE:TW103

Trap Wraps are constructed from a medium weight UV stabilized plastic which makes them durable, waterproof, and washable. They are easy to install and require No Tools for installment. They have been extensively field tested and proven to reduce animal stress and injuries. Likewise they will protect animals from wind, rain, sun, and other elements. They also provide the captured animal concealment from people who may become alarmed. Trap Wraps are very affordable and we strongly recommend attaching them to all of your traps.

Weight: 1 lbs

Size: 16L x 6W x 6H

Wire: UV Stabilized Plastic

$24⁰⁰

Quantity:

+ −

Add to Cart

SC40 - 14x5x5" Soffit Cone

CODE:SC40

SC40 - Soffit cones allow you exclude or trap critters from den openings in soffits or other overhead surfaces. Soffit cones have 1" flaps on each side which allow them to be easily attached. Once the soffit cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. These cones can also be used on vertical walls over animal entry points or even spiked into the ground over animal den openings. This cone measures 14"x 5"x 5" and is used with 4"x 4" traps or excluders.

Weight: 1 lb

Size: 14Lx5Wx5H

Wire: 1/2 x 1 - 14 gauge

$22²⁵

Select options

CC40 - 14x5x5" Inside Corner Cone

CODE:CC40

CC40 - Corner cones allow you exclude or trap critters from den openings on inside 90 degree corners of structures. Corner cones have two wing flaps which allow them to be easily attached. Once the corner cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. This cone measures 14"x 5"x 5" and is used with 4" x 4" traps or excluders.

Weight: 1.5 lb

Size: 14Lx5Wx5H

Wire: 1/2 x 1 - 14 gauge

$36²⁵

Select options

PTC107SS - 32x9x9 Plastic Trap Cover for Model 107SS

CODE:PTC107SS

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

$35⁴⁰

Quantity:

+ −

Add to Cart

BB23 - Medium Hanging Bait Basket - 2.5" x 3"

CODE:BB23

Model BB23 is a medium size bait basket to hang in the back of a trap. This bait box measures 2.5" x 2.5" x 3" with an open top and chain to hang from the trap. The bait basket suspends bait off the ground allowing the scent of bait to travel farther and give your target animal a view of the bait from a distance. The basket also makes it more difficult for the animal to steal bait both outside and inside the trap.

Weight: .75 lb

Size: 2.5 x 2.5 x 3

Wire: 1/2 x 1/2 - 16 gauge

$16⁵⁰

Select options

CN60 - Collapsible Nose Cone for 6x6 Traps

CODE:CN60

Model CN60 is a collapsible nose cone designed to fit 6"W x 6"H traps. This nose cone features prongs along the bottom edge which can be pressed firmly into the ground to insure it will stay in position. The diversity of this unique cone allows you to lift any one of 3 flaps so it can be mounted against any vertical surface to direct animals into your trap as they exit their dens. You can also leave all flaps down and press the nose cone into position over a den opening in the ground. And for those with limited space in your service vehicles, the best feature is this nose cone can be folded flat in seconds taking virtually no storage...

Weight: 1 lb

Size: 9L x 6.5W x 7H

Wire: 1/2 x 1 - 14ga

$34⁹⁵

Select options

Water Tray Kit for Pigeon Traps

CODE:PCW668

Water container accessory designed to fit any pigeon or bird trap or carrier that is 8" high or higher. Comes complete with 6" x 6" x 8" high wire mesh housing designed to keep 28 oz. water container clean. Water container is included. Model PCW668.

$30⁰⁰

Quantity:

+ −

Add to Cart

Food & Water Tray Combo Kit for Pigeon Traps

CODE:PCWF668

Combination Kit containing PCF668 - Food Container and PCW668 – Water Bowl. These accessories are designed to fit any pigeon or bird trap or carrier that is 8" high or higher. Comes complete with 6 x 6 x 8" high wire mesh housing designed to keep food tray clean. Sheet metal food tray is included and measures 5 x 5 x 2". And 6 x 6 x 8" high wire mesh housing designed to prevent water bowl from tipping and keeping water clean. Model PCWF668

$50⁰⁰

Quantity:

+ −

Add to Cart

C306 - Cage To Trap Connector

CODE:C306

Model C306 is a revolutionary accessory designed to make feral cat care as stress free as possible. This accessory slides into the rear door slides of a transfer cage and feral cat trap allowing you to use your transfer cage as a litter box cage. Coupled with our new disposable litter tray this accessory will make long term cat care and recovery safer and healthier for feral cats and you. Use a trap divider to section off the cat in the trap then remove the sliding doors from both the trap and transfer cage. Insert a disposable litter tray into the transfer cage. Next line up the cage and trap then simply slide the connection piece in...

Wire: 1/2 x 1 - 14G Galvanized Wire Mesh

$44⁷⁵

Select options

C307 - Cage To Cage Connector

CODE:C307

Model C307 is an accessory designed to make feral cat care as stress free as possible. This accessory slides into the rear door slot of transfer cages allowing you to connect multiple transfer cages or squeeze cages together. This product works with model 306, 306NC, and 306NC2 transfer cages and 306SQ, 306NCSQ and 306NC2SQ squeeze cages. Together with trap dividers this product makes it very easy to transfer animals from cages to squeeze cages or create larger recovery spaces by connecting multiple cages together. A separate connection piece is also available to connect traps and cages together. With both model C307 cage to cage...

Weight: 2.5 lbs

$44⁷⁵

Select options

C608 - Trap to Trap Connection Piece

CODE:C608

Model C608 is a connection piece that allows you to connect a 10" wide x 12" tall trap with rear sliding door to another trap of the same size with a rear sliding door.

$44⁷⁵

Select options

TD12NC - Feral Cat Trap Divider with Powder Coated Finish and Locking Clip

CODE:TD12NC

Model TD12NC is our feral cat trap divider. This divider measures 12W x 18H" and is constructed of heavy duty 1/4" steel rods for extra strength and durability. This trap divider comes with a powder coated finish and features an attaching clip to prevent the divider from sliding out when in use. Dividers are designed to allow you to confine animals within a trap by simply sliding it down from the top or through the side of the trap. Use the divider to isolate the animal in one section of the trap then open the door and replace food and water or clean waste without risking the animal escaping.

Weight: 3 lbs

Size: 18H x 12W

Wire: 1/4" Steel Rod

$29⁹⁵

Select options

C700 - Den To Trap Connector

CODE:C700

Model C700 is a connection accessory designed to make feral cat care as stress free as possible. If allows you to connect any of our feral cat dens to most of our feral cat traps by inserting the connector into the door slides of both the den and trap. This will provide more room and a quiet calm space for the cat during recovery. Cat den models 711, 721, 731 can be connected to feral cat trap models 606NC, 608NC, and 608FN with the C700 connector. For easy installation after a cat has been trapped use a trap divider to keep the cat into the trap while you remove the sliding door from the trap and clear sliding door from the cat den....

$44⁷⁵

Select options

PTC107.5SS - 42x10x10 Plastic Trap Cover for Model 107.5SS

CODE:PTC107.5SS

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

Weight: 3 Lbs

Size: 42x10x10"

Wire: UV Treated Polyethylene

$39⁷⁵

Quantity:

+ −

Add to Cart

DLT - Cage Litter Tray

CODE:DLT

Model DLT is a disposable litter tray with a water resistant wax coating on the inside to use with model 306NC or 306 transfer cages. Trays measure 18L x 10.25W x 3H.

$2¹⁵

Quantity:

+ −

Add to Cart

DLT50 - 50 Pack of Disposable Litter Trays

CODE:DLT50

Model DLT50 is a package of 50 disposable litter trays. Features a wax coating on the inside for water resistance. Made to use with model 306NC or 306 transfer cages. Trays measure 18L x 10.25W x 3H.

$79⁵⁰

Quantity:

+ −

Add to Cart

BBD34 - Enclosed Large Hanging Bait Basket with Door - 3.5" x 4"

CODE:BBD34

Bait baskets are designed to hang from inside the trap and are suspended up off the ground. This allows the scent of your bait to travel further and gives your target animals a visual to draw them in. It also makes it more difficult for critters to reach through the trap and steal your bait. This completely enclosed bait basket with door measures 3.5" x 3.5" x 4" and features ½" x ½" – 16GA galvanized steel mesh. It also has and hanging hook to make installation and removal very simple.

Weight: 1 lb

Size: 3.5 x 3.5 x 4

Wire: 1/2 x 1/2 - 16 gauge

$20⁵⁰

Select options

N50 - Nose Cone For All 5 x 5 Traps

CODE:N50

Nose cones are used as an extension of a trap to guide animals directly from a burrow or den opening into the trap. Nose cones work great for animals that burrow underground. Set the nose cone opening directly over the burrow, when the critter exits, he will pass through the bottom opening of the nose cone and be forced directly into the trap making the set nearly fool-proof. This nose cone measures 9L x 6W x 6H" and fits on all 5W x 5H" trap models.

Weight: 1 lbs

Size: 9L x 5.5W x 5.5H

Wire: 1/2 x 1 - 16 gauge

$21²⁵

Select options

306NC - Cat Transfer Cage

CODE:306NC

Model 306NC is designed with help from the Neighborhood Cats Organization specifically for transfer from traps that are 10" wide x 12" tall and our Neighborhood Cats Drop Trap. It features an easy release sliding door, extra large hand guard, and extra large double handles and a bottom tray for animal feet comfort. The tray is also removable for easy cleaning. This transfer cage measures 20L x 11W x 12H and is constructed of 1 x 1" - 14 gauge wire mesh.

Weight: 8 lbs

Size: 20L x 11W x 12H

Wire: 1 x 1 - 14 gauge mesh

$69⁹⁵

Select options

Divider For 12'' Wide and Smaller Traps & Cages

CODE:TD12

Model TD12 is our standard duty trap divider for all 12'' and smaller traps and cages. This divider measures 11" wide and 18" tall. Trap dividers can be used to section off part of a trap or cage, gently push trapped animals into transfer cages and allow for easier release from traps without rear sliding doors. Divider spacing is aprox. 1" apart.

Weight: 3 lbs

Size: 11W x 18H

Wire: .192 gauge

$24⁵⁰

Select options

HD Divider for 15" Wide and Smaller Traps & Cages

CODE:TD15H

TD15H - Heavy duty trap divider for all 15'' wide and smaller traps and cages. This divider measures 14" wide and 25" tall and has 2" spacing between the tongs. This divider also has a black powder coated finish. Trap dividers can be used to section off part of a trap or cage, gently push trapped animals into transfer cages and allow for easier release from traps without rear sliding doors.

Weight: 7 lbs

Size: 14W x 25H

Wire: .250" Steel Rod

$40⁰⁰

Quantity:

+ −

Add to Cart

TW104 - Trap Wrap For All 7" x 7" Traps

CODE:TW104

Trap Wraps are constructed from a medium weight UV stabilized plastic which makes them durable, waterproof, and washable. They are easy to install and require No Tools for installment. They have been extensively field tested and proven to reduce animal stress and injuries. Likewise they will protect animals from wind, rain, sun, and other elements. They also provide the captured animal concealment from people who may become alarmed. Trap Wraps are very affordable and we strongly recommend attaching them to all of your traps.

Weight: 1 lbs

Size: 17L x 7W x 6H

Wire: UV Stabilized Plastic

$26⁷⁰

Quantity:

+ −

Add to Cart

TC06 - Ground Guard for all 6" Wide Traps

CODE:TC06

This galvanized trap cover fits all 6'' wide traps. It has "Easy Attach" spring clips on each corner so it can be quickly attached to a trap. This cover can be applied to the top or bottom of the trap. Attaching to the bottom prevents animals from damaging roofs, decks, and other valuable items. Attaching to the top helps protect animals from the elements and protects handlers from bites and scratches. Fits models 103, 603, 202, 104, 203, 103SS, 603SS.

Weight: 1 lbs

Size: 14L x 5W x 2H

Wire: Galvanized Sheet Metal

$27⁹⁵

Quantity:

+ −

Add to Cart

SC50 - 14x6x6" Soffit Cone

CODE:SC50

SC50 - Soffit cones allow you exclude or trap critters from den openings in soffits or other overhead surfaces. Soffit cones have 1" flaps on each side which allow them to be easily attached. Once the soffit cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. These cones can also be used on vertical walls over animal entry points or even spiked into the ground over animal den openings. This cone measures 14"x 6"x 6" and is used with 5"x 5" traps or excluders.

Weight: 2 lbs

Size: 14L x 6W x 6H

Wire: 1/2 x 1 - 14 gauge

$23⁵⁰

Select options

CC50 - 14x6x6" Inside Corner Cone

CODE:CC50

CC50 - Corner cones allow you exclude or trap critters from den openings on inside 90 degree corners of structures. Corner cones have two wing flaps which allow them to be easily attached. Once the corner cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. This cone measures 14"x 6"x 6" and is used with 5" x 5" traps or excluders.

Weight: 2 lbs

Size: 14L x 6W x 6H

Wire: 1/2 x 1 - 14 gauge

$38⁵⁰

Select options

PTC108.6SS - 42x10x12 Plastic Trap Cover for Model 108.6SS

CODE:PTC108.6SS

Trap Covers are great for protecting captured animals from the elements. They also hide trapped animals so people passing by don't see them and become alarmed. The trap cover can be left on the trap when transporting the animal, giving you added protection. Covers also have a calming effect over most trapped animals. Trap covers protect bait from the elements keeping it dry and more appealing to animals. Our plastic trap covers are made from .090 low density polyethylene and UV treated to protect against sunlight. They are durable, easy to clean, and fold flat for easy storage.

$42⁶⁰

Quantity:

+ −

Add to Cart

BB34 - Large Hanging Bait Basket - 3.5" x 4"

CODE:BB34

Model BB34 is a large size bait basket to hang in the back of a trap. This bait box measures 3.5" x 3.5" x 4" with an open top and chain to hang from the trap. The bait basket suspends bait off the ground allowing the scent of bait to travel farther and give your target animal a view of the bait from a distance. The basket also makes it more difficult for the animal to steal bait both outside and inside the trap.

Weight: 1 lb

Size: 3.5 x 3.5 x 4

Wire: 1/2 x 1/2 - 16 gauge

$18⁵⁰

Select options

CN70 - Collapsible Nose Cone for 7x7 Traps

CODE:CN70

Model CN70 is a collapsible nose cone designed to fit 7"W x 7"H traps. This nose cone features prongs along the bottom edge which can be pressed firmly into the ground to insure it will stay in position. The diversity of this unique cone allows you to lift any one of 3 flaps so it can be mounted against any vertical surface to direct animals into your trap as they exit their dens. You can also leave all flaps down and press the nose cone into position over a den opening in the ground. And for those with limited space in your service vehicles, the best feature is this nose cone can be folded flat in seconds taking virtually no storage...

Weight: 1.5 lbs

Size: 11L x 8W x 9H

Wire: 1x1 - 14 Gauge

$39⁹⁵

Select options

306TX - Set Over Capture Cage

CODE:306TX

The Tomahawk model 306TX - Set Over Capture Cage was designed for cats that are easy to approach but are difficult or impossible to pick up. This cage has a removable sheet metal bottom so that the cage can be set directly over a cat without having to force them into a door. After the cage is over the cat simply slide the bottom tray in under its feet and lock it into place. This cage also features a sliding transfer door on one end that lines up with our 10W x 12H" feral cat traps and also our Neighborhood Cats Drop Trap. It also features large double handles for easy carrying and a large hand guard to protect from bites and scratches....

Weight: 10 lbs

Size: 21L x 11W x 12H

Wire: 1 x 1 - 14 gauge

$96⁵⁰

Select options

306NC2 - Two Door Transfer Cage

CODE:306NC2

Model 306NC2 is our Neighborhood Cats transfer cage designed with 2 easy release sliding doors which allows you to transfer animals from traps to cages safely and securely with little stress to you or the animal. They work perfectly with any of our 10" wide traps such as 606NC, 608NC, 608FN, and also the Neighborhood Cats Drop Trap. This cage features two easy release sliding doors, one on each end. You can use our model C306 Connectors to connect one or two traps to this cage. Or use our C307 connector and connect multiple cages together. You can create a cage recovery system with multiple areas for feeding and litter boxes. . These...

Weight: 8 lbs

Size: 21L x 11W x 12H

Wire: 1x1 - 14 gauge

$89⁷⁵

Select options

TW105 - Extra Long Trap Wrap For All 7" x 7" Traps

CODE:TW105

Trap Wraps are constructed from a medium weight UV stabilized plastic which makes them durable, waterproof, and washable. They are easy to install and require No Tools for installment. They have been extensively field tested and proven to reduce animal stress and injuries. Likewise they will protect animals from wind, rain, sun, and other elements. They also provide the captured animal concealment from people who may become alarmed. Trap Wraps are very affordable and we strongly recommend attaching them to all of your traps.

Weight: 1 lbs

Size: 22L x 7W x 6H

Wire: UV Stabilized Plastic

$28²⁰

Quantity:

+ −

Add to Cart

306NCSQ - Squeeze Cage for Feral Cats

CODE:306NCSQ

Model 306NCSQ is a squeeze cage designed specifically for feral cats with all of the Neighborhood Cats features including top latch on easy release door, extra-large top plate, and two extra-large handles. This cage measures 20L x 11W x 12H" and is constructed of 1 x 1" - 14 gauge wire mesh. Squeeze Cages are excellent for vaccinating and examining animals. The internal squeeze panel can be pushed forward until the animal is firmly held between the panel and the opposite side of the cage. This squeeze cage also features a plastic bottom tray for animal feet comfort that is removable for easy cleaning. The squeeze panel arm handles fold...

Weight: 7 lbs

Size: 20L x 11W x 12H

Wire: 1 x 1 - 14 gauge mesh

$105⁵⁰

Select options

306NC2SQ - Squeeze Cage for Feral Cats with Two Sliding Doors

CODE:306NC2SQ

Model 306NCSQ is a squeeze cage designed specifically for feral cats with all of the Neighborhood Cats features including top latch on easy release door, extra-large top plate, and two extra-large handles. This model also features a sliding door on BOTH ends of the cage. This cage measures 20L x 11W x 12H" and is constructed of 1 x 1" - 14 gauge wire mesh. Squeeze Cages are excellent for vaccinating and examining animals. The internal squeeze panel can be pushed forward until the animal is firmly held between the panel and the opposite side of the cage. This squeeze cage also features a plastic bottom tray for animal feet comfort that is...

Weight: 7 lbs

Size: 20L x 11W x 12H

Wire: 1 x 1 - 14 gauge mesh

$124⁷⁵

Select options

HD Divider for 20" Wide and Smaller Traps & Cages

CODE:TD20H

TD20H - Heavy duty trap divider for all 20'' wide and smaller traps and cages. This divider measures 21W x 32H" and has tongs 3" apart. This divider comes with a black powder coated finish. Trap dividers can be used to section off part of a trap or cage, gently push trapped animals into transfer cages and allow for easier release from traps without rear sliding doors.

Weight: 8 lbs

Size: 21W x 32H

Wire: .250" Steel Rod With Powder Coating

$50⁰⁰

Quantity:

+ −

Add to Cart

N60 - Nose Cone For All 6 x 6 Traps

CODE:N60

Nose cones are used as an extension of a trap to guide animals directly from a burrow or den opening into the trap. Nose cones work great for animals that burrow underground. Set the nose cone opening directly over the burrow, when the critter exits, he will pass through the bottom opening of the nose cone and be forced directly into the trap making the set nearly fool-proof. This nose cone measures 12L x 7W x 7W" and fits all 6W x 6H" trap models.

Weight: 2 lbs

Size: 13L x 7W x 7H

Wire: 1 x 1 - 14 gauge

$23⁵⁰

Select options

307 - Transfer Cage - Small Dog/Fox Size

CODE:307

Model 307 is a sliding door cage for foxes, small dogs and similar size animals. One entire end of this cage is a sliding door designed for easy transfer from live traps. The sliding door on this transfer cage matches up nicely with the rear sliding door on our 12W x 12H" and 12W x 14H" traps for easy transfer. This transfer cage measures 26L x 12W x 16H" and is constructed of 1 x 2" - 12 gauge wire mesh. This cage has a sheet metal tray bottom for animal feet comfort and it is removable for easy cleaning.

Weight: 11 lbs

Size: 26L x 12W x 16H

Wire: 1 x 2 - 12 gauge

$104⁹⁵

Select options

TW106 - Trap Wrap For All 9" x 9" Traps

CODE:TW106

Trap Wraps are constructed from a medium weight UV stabilized plastic which makes them durable, waterproof, and washable. They are easy to install and require No Tools for installment. They have been extensively field tested and proven to reduce animal stress and injuries. Likewise they will protect animals from wind, rain, sun, and other elements. They also provide the captured animal concealment from people who may become alarmed. Trap Wraps are very affordable and we strongly recommend attaching them to all of your traps.

Weight: 1 lbs

Size: 21L x 9W x 8H

Wire: UV Stabilized Plastic

$33⁹⁰

Quantity:

+ −

Add to Cart

TC07 - Ground Guard for all 7" Wide Traps

CODE:TC07

This galvanized trap cover fits all 7'' wide traps. It has "Easy Attach" spring clips on each corner so it can be quickly attached to a trap. This cover can be applied to the top or bottom of the trap. Attaching to the bottom prevents animals from damaging roofs, decks, and other valuable items. Attaching to the top helps protect animals from the elements and protects handlers from bites and scratches. Fits models 104.5, 105, 604.5, 605, 204, 105.5, 105SS, 605SS, S70.

Weight: 1 Lbs

Size: 22L x 7W x 2H

Wire: Galvanized Sheet Metal

$30⁵⁵

Quantity:

+ −

Add to Cart

SC60 - 20x7x7" Soffit Cone

CODE:SC60

SC60 - Soffit cones allow you exclude or trap critters from den openings in soffits or other overhead surfaces. Soffit cones have 1" flaps on each side which allow them to be easily attached. Once the soffit cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. These cones can also be used on vertical walls over animal entry points or even spiked into the ground over animal den openings. This cone measures 20"x 7"x 7" and is used with 6"x 6" traps or excluders.

Weight: 2.5 lbs

Size: 20L x 7W x 7H

Wire: 1 x 1 - 14 gauge

$25⁹⁵

Select options

CC60 - 20x7x7" Inside Corner Cone

CODE:CC60

CC60 -Corner cones allow you exclude or trap critters from den openings on inside 90 degree corners of structures. Corner cones have two wing flaps which allow them to be easily attached. Once the corner cone is in place, simply slide your trap or excluder into position and remove unwanted rodents. This cone measures 20"x 7"x 7" and is used with 6"x 6" traps or excluders.

Weight: 2.5 lbs

Size: 20L x 7W x 7H

Wire: 1 x 1 - 14 gauge

$40⁹⁵

Select options

CN90 - Collapsible Nose Cone for 9x9 Traps

CODE:CN90

Model CN90 is a collapsible nose cone designed to fit 9"W x 9"H traps. This nose cone features prongs along the bottom edge which can be pressed firmly into the ground to insure it will stay in position. The diversity of this unique cone allows you to lift any one of 3 flaps so it can be mounted against any vertical surface to direct animals into your trap as they exit their dens. You can also leave all flaps down and press the nose cone into position over a den opening in the ground. And for those with limited space in your service vehicles, the best feature is this nose cone can be folded flat in seconds taking virtually no storage...

Weight: 1.75 lbs

Size: 14L x 10W x 11H

Wire: 1x1 - 14 Gauge

$42⁹⁵

Select options

10 X 12 External Bait Cage

CODE:BC108

Model BC108 is an external bait cage designed to attach to the back of our raccoon sized traps. This includes models 108 and 608 and all other traps that measure 10W x 12H". This cage is constructed from ½ x 1 – 14 gauge galvanized wire and features a guillotine style release door for easy access. It measures 19L x 10W x 12H' and weighs 8 lbs.

Weight: 8 lbs

Size: 19L x 10W x 12H

Wire: 1/2 x 1 - 14 gauge

$69⁹⁵

Select options

HD Divider for 25" Wide and Smaller Traps & Cages

CODE:TD25H

TD25H - Heavy duty trap divider for all 20'' wide and smaller traps and cages. This divider measures 27W x 34H" and has tongs 3" apart. This divider comes with a black powder coated finish. Trap dividers can be used to section off part of a trap or cage, gently push trapped animals into transfer cages and allow for easier release from traps without rear sliding doors.

Weight: 8 lbs

Size: 27W x 34H

Wire: .250" Steel Rod With Powder Coating

$60⁰⁰

Quantity:

+ −

Add to Cart

Free shipping

Plastic Replacement Cage Tray

CODE:P306NC

This UV treated plastic removable tray sits on the bottom of Model 306NC or 306 transfer cage to provide a stable platform for animals. This item ships free within the contiguous US. If you need this item to ship express or to Alaska, Hawaii or another country please call us at 800-272-8727.

$20⁰⁰

Quantity:

+ −

Add to Cart

DT-TD Drop Trap Divider

CODE:DT-TD

Model DT-TD is a trap divider designed specifically for our Neighborhood Cats DT1 drop trap. It measures 18"W x 16"H with 2" spacing between tines and is constructed from ¼" steel rods for extra strength and durability. This divider comes with a powder coated finish. Two or three of these dividers used in tandem work best for corralling trapped cats towards the release door and into the transfer cage. They can also be used to isolate cats from one another when more than one cat is captured at once.

Weight: 2.75 lbs

Size: 18H x 16W

Wire: 1/4" Steel Rod

$39⁷⁵

Select options

TW1010 - Trap Wrap For All 10" x 10" Traps

CODE:TW1010

Trap Wraps are constructed from a medium weight UV stabilized plastic which makes them durable, waterproof, and washable. They are easy to install and require No Tools for installment. They have been extensively field tested and proven to reduce animal stress and injuries. Likewise they will protect animals from wind, rain, sun, and other elements. They also provide the captured animal concealment from people who may become alarmed. Trap Wraps are very affordable and we strongly recommend attaching them to all of your traps.

$36⁹⁰

Quantity:

+ −

Add to Cart

TW108 - Trap Wrap For All 10" x 12" Traps

CODE:TW108

Trap Wraps are constructed from a medium weight UV stabilized plastic which makes them durable, waterproof, and washable. They are easy to install and require No Tools for installment. They have been extensively field tested and proven to reduce animal stress and injuries. Likewise they will protect animals from wind, rain, sun, and other elements. They also provide the captured animal concealment from people who may become alarmed. Trap Wraps are very affordable and we strongly recommend attaching them to all of your traps.

Weight: 1.5 lbs

Size: 26L x 10W x 11H

Wire: UV Stabilized Plastic

$38⁴⁰

Quantity:

+ −

Add to Cart

TC09 - Ground Guard for All 9" Wide Traps

CODE:TC09

This galvanized trap cover fits all 9'' wide traps. It has "Easy Attach" spring clips on each corner so it can be quickly attached to a trap. This cover can be applied to the top or bottom of the trap. Attaching to the bottom prevents animals from damaging roofs, decks, and other valuable items. Attaching to the top helps protect animals from the elements and protects handlers from bites and scratches. Fits models 106, 106.3, 606, 606.3, 205, 206,107, 106SS, 606SS.

Weight: 1 lbs

Size: 24L x 9W x 2H

Wire: Galvanized Sheet Metal

$38³⁵

Quantity:

+ −

Add to Cart

N70 - Nose Cone For All 7 x 7 Traps

CODE:N70

Nose cones are used as an extension of a trap to guide animals directly from a burrow or den opening into the trap. Nose cones work great for animals that burrow underground. Set the nose cone opening directly over the burrow, when the critter exits, he will pass through the bottom opening of the nose cone and be forced directly into the trap making the set nearly fool-proof. This directional cone measures 12L x 8W x 8H" and fits all 7W x 7H" trap models.

Weight: 2 lbs

Size: 13L x 8W x 8H

Wire: 1 x 1 - 14 gauge

$25⁵⁰

Select options

308 - Transfer Cage - Dog

CODE:308

Model 308 is a sliding door cage for average dogs and similar size animals. One entire end of this cage is a sliding door designed for easy transfer from live traps. This transfer cage matches up nicely with the rear sliding door on our 15W x 20H" trap model 609.5. This cage measures 30L x 16W x 20H" and is constructed of 1 x 2" - 12 gauge wire mesh. This cage has a sheet metal tray bottom for animal feet comfort and it is removable for easy cleaning.

Weight: 17 lbs

Size: 30L x 16W x 20H

Wire: 1 x 2 - 12 gauge

$123⁷⁵

Select options

Trap Accessories

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Extras

My Account

Customer Service

Tomahawk Live Trap

Trap Accessories

In This Category: In This Category:

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media

Extras

My Account

Customer Service

Tomahawk Live Trap

Find us on social media